Landfill Remediation Equipment For Waste And Recycling In Texas
-
Manufactured by QED Environmental Systems, Incbased in USA
The increased availability of special drilling equipment has caused more landfills and cleanup projects to appreciate the unique advantages of low-angle wells or risers where conventional vertical wells are inefficient or impossible to use. Sloped landfill risers for leachate and/or landfill gas allow wellhead installations and other equipment to be placed outside landfill cells, not in the ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Retriever is a solar-powered, wireless data collection solution for landfill, remediation, and other sites. The Retriever is not just hardware, but an entire data delivery and reporting system that delivers dependable reporting of well level and pump flow data, clearly charted and displayed, and securely archived. ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP2 Bottom Inlet Short and the AP2 Top Inlet Short AutoPumps both provide maximum capabilities and flow in a pump for 2“ (50 mm) diameter ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The Easy Fitting Quick-release Connectors is a new type of lower-cost, quick fitting for the AutoPump (Patent Pending), designed for severe duty downwell conditions at landfills and remediation sites. The Easy Fitting allows the AutoPump to be quickly disconnected from its tubing and hose sets, eliminating the need to cut the tubing. Constructed of high-quality, stainless steels the Easy Fitting ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP4+ was made easier to clean by using 3 bolts to attach the pump inlet and open up the pump. This is easier than having to rotate the inlet multiple turns to unthread it from the center tube inside the pump, especially under field conditions of silt, deposits and coatings. Removing the inlet is also aided by the new, precision ID pump casing, ensuring a more controlled fit. The new pump ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP4+ Top Inlet Short, AP4+ Low Drawdown Top Inlet, AP4+ Bottom Inlet Short and AP4+ Low Drawdown Bottom Inlet AutoPump provide maximum capabilities and flow in a pump for 4” (100mm) diameter and larger wells and the need for an elevated inlet, such as pumping total fluids from wells contaminated with ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AutoPump AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life of the pump and to broaden the range of conditions each model can be used in. All nonmetallic internal parts are PVDF*, a high-grade engineering plastic with higher strength at elevated temperatures and extremely broad chemical resistance, including acidic and oxidizing cleaning ...
-
Manufactured by QED Environmental Systemsbased in USA
Retriever is a solar-powered, wireless data collection solution for landfill, remediation, and other sites. The Retriever is not just hardware, but an entire data delivery and reporting system that delivers dependable reporting of well level and pump flow data, clearly charted and displayed, and securely ...
-
Manufactured by QED Environmental Systems, Incbased in USA
AutoPump Automatic Air-Powered Remediation and Leachate & Methane Condensate Pumps. QED’s AutoPumps originated the automatic air-powered pump concept in 1986 and has led the industry ever since. AutoPumps were designed specifically to handle difficult conditions reliably and safely, including hydrocarbon (LNAPL and dissolved phase) remediation, landfill leachate and methane condensate ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AP3 Top Inlet, Short AutoPump is designed for applications requiring an elevated inlet, such as pumping total fluids from wells contaminated with ...
-
Manufactured by Climate Tanksbased in USA
We’ve been told that water from a spring or stream is cleaned as the ground filters the water. Yet, whatever water touches, it becomes. This means most natural sources of water contain metals, bacteria, organic matter like feces and/or pharmaceuticals. Rain offers the best opportunity to collect water from natural sources before water absorbs ground contaminates and unwanted additives. ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Pull pumps faster from landfill and remediation wells to reduce downtime and increase productivity while protecting field personnel from injury. Removing pumps from landfill gas, leachate or groundwater remediation wells for cleaning or maintenance can be time-consuming, awkward and physically demanding. QED’s Pump Pull E™ Pump Extractor is designed to make pump retrieval faster and ...
-
Manufactured by QED Environmental Systemsbased in USA
The AutoPump AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life of the pump and to broaden the range of conditions each model can be used ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The AutoPump AP4+ High Viscosity Model is designed to pump thick, viscous liquids. Its air-powered operation is safe and dependable under conditions that challenge other pumps. While this pump is designed to pump viscous liquids up to 7,000 cSt, it is capable of delivering flow rates up to 6.4 gpm (24 Lpm) when pumping water or a liquid with a similar viscosity. The AP4+ High Viscosity AutoPump ...
-
Manufactured by QED Environmental Systems, Incbased in USA
This versatile system offers the most flexible pumping setup for every landfill and cleanup pumping need. Designed for reliable, high-performance pumping of almost any fluid under the most difficult operating conditions, TopDrive piston pumps allow for substantial flexibility in depth setting, drive and flow options. There are no down-well pneumatic lines or electric motors, and the mechanism ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Down well or above ground, QED opens up new possibilities by adding a new high-temperature polymer tubing to the lineup of Nitrile hose and jacketed nylon tubing sets for airpowered pumps. With a maximum working temperature of 250° F (121° C) at 100 PSI, Red-Line Tubing will be a problemsolver at your most challenging job sites. High-temperature tubing sets have the same UV protection as ...
-
Manufactured by Advanced Geosciences, Inc.based in USA
A Switch Box with a grid of sealed connectors for custom electrodes. The all new Switch Box Grid is used to connect electrodes using wires terminated with banana plugs. The Switch Box Grid is available for the SuperSting WiFi and the SuperSting R8 models, it is not compatible with the SuperSting R1 ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The dipmeter is lightweight, reliable and with a simple operation for use by drilling contractors, fruit and vegetable farmers, and people using it in landfill and remediation ...
-
PremiumManufactured by Finn Corporationbased in USA
The revolutionary new Titan HydroSeeders provide more performance, more power and more productivity than ever before. Designed to improve overall user experience and outperform all other units with ease, the Titan provides the unique features demanded by industry experts and required to meet today’s challenging ...
-
Manufactured by Macpresse Europa S.R.Lbased in ITALY
Ideal to shred waste paper, the MAC 1000 model is fitted with a single fast rotor and fixed hammers for high hourly output and easily shreds material in thick and bulky packs such as bundled newspapers. To get a balanced output between baler and shredder we recommend coupling this model with the MAC 106 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you