Waste Landfill (Landfill Sites) Equipment
-
based in USA
Landfill liners are designed and constructed to create a barrier between the waste that is dumped in the landfill and the ground below it. When a new landfill disposal area is constructed, referred to as a landfill cell, the geomembrane liner and other geosynthetic products are ...
-
Manufactured by richter & heß VERPACKUNGS-SERVICE GmbHbased in GERMANY
PACKAGING for landfilling waste in underground landfills (Herfa-Neurode, Heilbronn, Zielitz, ...
-
Manufactured by Wind & Sun Protection Inc.based in CANADA
Due to increased awareness of environmental issues and increasing proximity of landfill sites to cities and other urban areas, the need for litter control and containment continues to rise. From recycling facilities to solid waste landfills, litter control can help to ensure a clean and safe environment, both within and surrounding ...
-
Manufactured by Atmos Technologiesbased in USA
Our Bulk Storage & Dilution System (BSD-7000) is equipped to handle bulk tank truck quantities of our foam concentrate at any solid waste landfill or environmental remediation site. We’ve simplified the process with automatic dilution and metering capabilities, which eases transfers into on-board storage tanks. The system is also ...
-
Manufactured by Trevi Benne S.p.A.based in ITALY
Essential equipment for numerous applications such as selecting stones along water courses, selecting resulting materials after a demolition, reclaiming stony soil, cleaning beaches, separating organic waste in landfill sites, covering pipes in canalization works, ...
-
based in ITALY
LandRISK is a cloud web-mapping DSS for data management, statistical analysis, near-real time hydro-geological modelling for assessing the groundwater quality and risk for human and environment related to a waste Landfill and contaminated sites. LandRISK allows the contaminated site manager and the control Authorities to obtain ...
-
Manufactured by Maan Enviro Technologiesbased in INDIA
Transfer of large quantities of Municipal Solid Waste using Transfer Station is an age-old concept . It is being practiced in many cities around the world . In India, the utility of Transfer Station arises in the cities where there is a large generation of waste and landfill sites are far away from the city. In most Indian cities, ...
-
Distributed by Renby Limitedbased in UNITED KINGDOM
Some industrial processes create foul smelling odours. Odour Control in Waste Processing, Landfill, Sewage treatment and Animal Rendering Suppressing is a constant a challenge. Preventing the odour is often impossible. Treating odours can be very difficult, especially in remote locations where water and power are not readily available. ...
-
Manufactured by General Industries, Inc.based in USA
Leachate tanks are usually large aboveground or underground tanks installed at landfills and waste collection sites to collect the rainwater runoff for treatment. These tanks prevent contaminated water from seeping into the ground water prior to treatment. The liners of large landfills aid in the collection of the runoff which is then ...
-
Manufactured by Biofuture Ltdbased in IRELAND
Biological removal of partially degraded and soluble organic materials in landfill leachate. The waste in domestic landfill sites is largely composed of degradable organic material. Of the total some 40% is paper while another 30% is composed of vegetable waste. The environment within the landfill is anaerobic as ...
-
by TerraDatbased in UNITED KINGDOM
The problem of characterising both active and closed landfills and waste sites is an increasing one in the light of increasing environmental legislation and poor historical records. A TerraDat geophysical survey can be rapidly carried out for a fraction of the cost of obtaining low-resolution information through invasive means, without ...
-
Manufactured by Agile Process Chemicals LLP - APChemibased in INDIA
Extended Producer Responsibility or EPR is a legislative strategy used by most industrialised nations to promote chemical recycling of plastic waste. Today, more than 95% of plastic waste ends up in landfills. Globally, EPR is the only viable strategy to prevent landfilling of plastic ...
-
Manufactured by Automatic Flare Systems Limited (AFS)based in UNITED KINGDOM
Anaerobic decomposition of organic solid waste in the landfill site produces landfill gas (LFG). LFG mainly consists of methane and carbon dioxide, both of which are odorless. Trace constituents of other volatiles, often malodorous or toxic gases, are also found in LFG. LFG can migrate through soil into structures located on or near ...
-
Manufactured by Abellon Clean Energy Limitedbased in INDIA
is collected for recycling. However, while plastic may be labeled as recyclable, only a small fraction of it is technically or economically viable to recycle. A large pool of plastic waste ends up in landfills, open dumps, and water bodies. ...
-
Manufactured by EKO Environmental a Division of MacLean Engineeringbased in CANADA
HazPak offers a closed loop recycling system that not only solves a huge environmental problem, but allows the owner to benefit from several income streams while effectively doing their part to help stop global warming and ground water ...
-
Manufactured by GEOSER GEOSYNTHETIC A.Şbased in TURKEY
Geosynthetic clay cover (GCL) material is produced by batch pinning method of placing bentonite material between braided and non-braided geotextiles. In general, the upper layer is non-woven geotextile and the lower layer is braided geotextile. However, in some cases, non-woven geotextiles can be used on both the top and the bottom. The material produced by this method is also called ...
-
Manufactured by Full Service Srlbased in ITALY
CoWaste SW is easy to apply and guarantees long-term effectiveness. CoWaste SW is a technologically advanced sprayable foam of polymers and recycled fiber that forms a slurry when mixed with water. The slurry can be spray applied to smooth or irregular surfaces, steep slopes or vertical walls. CoWaste SW Foam Cover forms an uniform encapsulating layer between contaminated materials and the ...
-
Manufactured by Van Essen Instruments - part of Nova Metrix LLCbased in NETHERLANDS
The Diver Copper Shield protects the CTD-Diver from bio-fouling and reduces maintenance cost. There are many methods that can be used to prevent and remove the bioaccumulations. However, these methods can be expensive and detrimental to the environment. There is a lesser known natural solution that is a good match for the CTD-Diver and is effective at reducing the development of microorganisms. ...
-
Manufactured by Geochem Engineering SAbased in GREECE
GEOCHEM ENGINEERING’s Drainage Geocomposites cover Drainage applications which start from Building Projects to complex Environmental and Infrastructure ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Landfill gas is created during the anaerobic decomposition of organic substances in municipal solid waste (MSW) and commercial and industrial (C&I) wastes. Depending upon the landfill design and its management, as well as waste composition, compaction, moisture and several other factors, thousands of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you