Only show results available in Virginia? Ok

Liquid Waste Applications

  • Premium

    Industrial Weighing - Tank/Vessel/Hopper Weighing

    Liquids, powders, solids, and gases are captured, stored, and processed in many different types of vessels, tanks, hoppers, and unique containers. Whether managing inventory, ensuring product consistency, or eliminating waste, there are numerous requirements for integrating weighing into these structures.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

  • Premium

    Solid/liquid separation for environment industry

    Four dewatering, three thickening, four drying, and multiple screening technologies for industrial and municipal wastewater, biomass and organic waste. Process expertise for sustainable solutions. Challenging municipal budgets. Water shortages. A need for renewable energy. Today, there’s simply no room for waste. Getting the most efficient separation is essential, not just to profitability, but also to ensuring sustainable growth.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA.

  • Premium

    Evaporators and concentrators for diecasting and moduling

    Concentrations of residual casting liquid, washing liquid of mold, waste water from processes, waste water with dye penetrant.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    Shredding of TetraPak with liquids with Mercodor shredding systems

    Mercodor shredding machine for crushing TetraPak with liquids are used for reducing the volume of waste. The crushing of TetraPak continues to make a significant contribution to the economic recovery of raw materials. Mercodor special engineering is your partner for professional shredding of TetraPak with liquids.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Crushing of salts with Mercodor crushing systems

    The crushing of salts such as, for example, hardness salts, salt dispensers, but also rock salt, is a great challenge for the crushing machine from various points of view. On the one hand, the salts are very hard, but already in the presence of a very small amount of a liquid they dissolve and mix with the liquid. The Mercodor crushers are best suitable for crushing of salts of any kind such as, for example, crushing of rock salts, but also for crushing of salt dispensers and hardness salts.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Shredding of glass with liquids with Mercodor shredding systems

    Mercodor shredding machine for crushing glass with liquids are used for reducing the volume of waste. The crushing of glass continues to make a significant contribution to the economic recovery of raw materials. Mercodor special engineering is your partner for professional shredding of glass with liquids.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Shredding solutions for drums and cubitainers

    The drums (from 5 to 220 lt) and the IBCs in HDPE are used for the transport and storage of liquids in countless industrial fields, alimentary and not. The shredders proposed by SatrindTech for this application are two-shaft type in the case of a simple volume reduction, used for achieving an optimization of the logistic processes (resulting in significantly reduce transport costs and material storage once shredded) and single-shaft, three- and four-shaft if the goal is to recycle material discarded from the production line. The two-shaft shredders can also be fitted with the special CL counterblade system that allows a controlled size of the material whilst shredding.

    By SatrindTech Srl based in Arluno, ITALY.

  • Pumping solutions for vacuum conveying within meat

    When you need to transport meat products and waste over longer distances within cattle, chicken and pig abattoirs, energy consumption is a major consideration. The unique Samson vacuum conveying system with liquid ring pumps is not only extremely efficient it is also both highly energy efficient and gentle to the products.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Recycling Systems for the municipal solid waste processing sector

    MACPRESSE products revolutionized the way the solid waste is transferred and processed.Used in different environments, our machines innovate and optimize the traditional process of waste disposal. In fact, different materials such as municpal solid waste is treated and compacted before transferring them from the transfer stations to landfill sites. This way, there’s no risk of land contamination and bad-smelling liquid formation – attracting vermin –when waste is not pre-treated ,collected in transfer stations and delivered to landfill sites.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Bins for cooking fats, oils, food wastes, liquid slops, slaughterhouse wastes and animal by-products

    The FATBOXX and FATBOXX max are perfectly new waste bins for disposing of cooking fats, oils, food wastes and liquid slops and slaughterhouse wastes and animal by-products. The special construction of the body and lid offer many benefits for end consumers and waste management companies.

    By P. Henkel GmbH based in Kreuztal, GERMANY.

  • Quarantined and International Waste

    Medical (Healthcare) Waste. Bio-hazardous waste. Pathological Waste. Cultures and stocks of infectious agents and associated biological agents. Liquid human and animal waste, blood and blood products and body fluids. Contaminated waste from animals. Sharps. Anatomical. Quarantined waste (airport and border protection). General waste (i.e. kitchen waste, etc.).

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Automated solutions for the hazardous waste pit dredging

    Liquid Waste Technology’s electric and diesel driven dredges can improve safety for workers dredging hazardous materials. Our custom built dredges can be equipped with remote control to allow workers to stand up to 762 meters (2500 feet) away from the toxic area, increasing their safety. Liquid Waste Technology can build dredges with automated controls, that dredge entire ponds using PLC controls. This increases workers safety and productivity in hazardous dredging applications.

    By Liquid Waste Technology LLC - Mud Cat based in New Richmond, WISCONSIN (USA).

  • Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Laboratory equipments for fluorine in industrial & construction waste

    Measuring Fluorine in Industrial and Construction Waste using Benchtop NMR MQC Analyser. Processing and recycling of industrial and construction waste often requires measuremetns of fluorine content in the materials. It mostly relates to monitoring potential emission of toxic fluorine gas and optimisation of the waste processing. Our benchtop NMR analyser MQC systems provide a fast, simple and accurate method of measuring fluorine in liquid and dry waste. The NMR technique does not require the use of any chemicals and complicated sample preparation.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Landfill Piping Solutions

    Landfills are active environments. Through natural processes of rainfall, condensation, and decomposition, landfills themselves produce a liquid waste stream, called leachate. Often the leachate contains hazardous materials, so properly managing a landfill requires handling the waste. ISCO offers products and services to help manage leachate including HDPE landfill pipe, perforated and slotted pipe as well as custom fabricated fittings.

    By ISCO Industries, LLC based in Louisville, KENTUCKY (USA).

  • Pumping solutions for Vacuum conveying within dairy

    Food safety and consistent quality are major concerns within the dairy business. This is exactly what we get from using high-performance Samson Pumps made for handling wet products within the food industry.

    By Samson Pumps A/S based in Viborg, DENMARK.

  • Air pollution control for the liquid waste treatment industry

    Companies requiring treatment of any waste-water emitted by a manufacturing process – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you