Magnetic Separation Equipment available in Algeria

Available in Algeria| Near Algeria
227 Results found

We couldn't find any results in Algeria

Here is a list of results available in Algeria

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Magnetic Separation ×

  • Available in: Africa ×

  • Available in: Algeria ×

Wet Drum Magnetic Separator

by Qijin Magnet Co., Ltd.     based in Maanshan, CHINA

Wet Drum Magnetic Separator - Used in separation of fine ore.

Magnetic Separation Systems

by The US Shredder and Castings Group     based in Miramar Beach, FLORIDA (USA)

U.S. Shredder and Castings Group is a leading supplier of magnetic separation systems for auto shredders and metal receycling operations. Strongest drum magnets available for your ferrous downstream Overband magnet for nonferrous lines Worldwide service.

Huate - Model CTB Series - Permanent-Magnetic Drum Separator

by Shandong Huate Magnet Technology Co., Ltd     based in Shandong, CHINA

The permanent magnetic drum separator are used in mines and coal separating factories to separate the wet fine magnetic substances or remove the magnetic substances from the non-magnetic materials.

Magnapower Magnetic Head Pulley

by Magnapower Equipment Ltd     based in Bromsgrove, UNITED KINGDOM

The Magnapower magnetic head pulley is widely used in the recycling and material handling industries for the continuous removal of ferrous metal. We are committed to providing a high performance unit which is durable and reliable and provides maximum magnetic separation efficiency.Our magnetic head pulleys tend to be built to our customer’s ...

liquid magnetic trap with 13000Gs

by Mag Spring Ningbo Zhenhai I&E Ltd     based in Ningbo, CHINA

Liquid magnetic trap also named magnetic trap,magnet trap,liquid trap,magnetic liquid trap,trap magnets or magnetic filter, consist of powerful magnetic bar and round stainless steel house with inlet and outlet. Liquid trap magnet is designed to remove ferrous contamination from different viscosity level liquid or slurry lines. they an ideal ...

PRAB - Magnetic Separators System

by PRAB, Inc     based in Kalamazoo, MICHIGAN (USA)

Remove ferrous particles efficiently and economicallyPRAB's Monlan line of magnetic separators employ high-intensity ferrite or rare earth magnets within a fully energized rotating drum to continuously remove ferrous particles from the flow of liquid. These systems are often used as a pre-filter to limit contaminants reaching subsequent filtration ...

CANMAG - Model LRH & LMR Series - DC Scrap Handling Magnets

by Deltax Ltd. (UK)     based in Hampshire, UNITED KINGDOM

Lifts are consistent over extended period of the day. Ideal for continuous rough usage. CANMAG Scrap Magnet Series are manufactured with a heavy-duty cast steel shell, Manganese steel bottom plate for extra protection. Fully protected terminals with protective lid and plug in leads. Wound with a deep field aluminum coil (optional ...

Model PMT - Permanent Magnetic Drum

by Vecoplan     based in Bad Marienberg, GERMANY

The permanent magnetic drum with housing (PMT) is installed directly downstream of a conveyor, e.g. a trough chain conveyor, conveyor belt or vibrating conveyor, and is ideal for separating magnetisable ferrous metal parts from comminuted material.

Metal Detectors Tunnel Coil

by Vecoplan     based in Bad Marienberg, GERMANY

Perfect detection: The tunnel coil detects metallic parts in all non-conductive or only slightly conductive materials and is built around the conveyor with a vibration-damping arrangement.

Goudsmit - Model Electro overbelt magnet - Continous removal of ferromagnetic particles

by Goudsmit Magnetic Systems BV     based in Waalre, NETHERLANDS

An overbelt magnet is suitable for the continuous removal of ferromagnetic (Fe) particles – such as iron or steel – from material streams containing a relatively large amount of Fe. The effectiveness of overbelt magnets varies from 70 to 90% deferrization; this can be increased to higher levels through use of multiple magnetic separators in ...

OEI - Oem Magnetic Filter Rods

by One Eye Industries Inc.     based in Calgary, ALBERTA (CANADA)

OEI has designed an array of our patented high strength Magnetic Filter Rods in OEM sizes, to replace existing filter media  in traditional OEM filter housing,  without the need for full filter replacement. We did this in response to customers wanting the superior Magnetic Filtration Power of our patented Magnetic Filter Rods, without ...

MPI - Model MT Series - Magnetic Tubes

by Magnetic Products, Inc. (MPI)     based in Highland, MICHIGAN (USA)

MPI's Magnetic Tubes (MT Series) are commonly used to remove small-to-medium-sized ferrous tramp metal contaminant from a variety of product streams. Typical uses include removing metallic grit from hydraulic reservoirs to minimize wear on the machine's seals and bushings. MTs are also used to remove unwanted ferrous contaminants in food and ...

hamos - Model HS Series - Electronic All-Metal Separators

by Hamos GmbH     based in Penzberg, GERMANY

hamos HS electronic all-metal separators serve for detection and fully-automatic removal of individually arising metallic contamination in free-falling, free-flowing bulk materials. Not only are metals containing iron (ferrous metals) recognised here, but also non-ferrous metals such as, e.g. aluminium, copper, brass, etc.The result is a ...

Model VÜB - Overbelt Magnetic Separator

by Vecoplan     based in Bad Marienberg, GERMANY

The overbelt magnetic separator VÜB is ideally suited for the separation of course material and ferrous metal parts and is installed in the conveying line itself, ideally at the transfer point between a belt conveyor or vibrating conveyor and a subsequent conveyor.

Magnets Pulley Separators

by Master Magnets Ltd     based in Redditch, UNITED KINGDOM

The Master Magnets pulley separators are an easy, reliable solution for the continuous extraction of ferrous metals from a product stream. Magnetic pulley separators are installed as a replacement head pulley at the discharge end of a conveyor. A non magnetic adjustable diverter plate is installed beneath the pulley to split the ...

Model QUICKTRON Series - Metal Separators

by Mesutronic Gerätebau GmbH     based in Kirchberg / Wald, GERMANY

QUICKTRON metal separators examine bulk materials such as granulates and powders in free fall. The ideal reject technology with digital 2 channel metal signal evaluation assures optimum safety, from receiving to shipping. The time required to eject contaminated product is minimized. This reduces loss of material and associated costs. Compact ...

Model VNES - Non-Ferrous Metal Separator

by Vecoplan     based in Bad Marienberg, GERMANY

The non-ferrous metal separator VNES can be installed in the conveying line itself for reliable separation of non-ferrous metals from wood, domestic refuse, plastics, etc.

Model EM61-MK2A - Metal Detectors

by Geonics Limited     based in Mississauga, ONTARIO (CANADA)

The EM61-MK2A is a high sensitivity, high resolution, time domain metal detector suitable for the detection of both ferrous and non-ferrous metal. Typical target response is a single, sharply defined peak, facilitating quick and accurate determination of location. Achievable depth of detection will depend on several target characteristics, with ...

hamos - Model FFS Series - Pneumatic Metal Separators

by Hamos GmbH     based in Penzberg, GERMANY

The hamos FFS series electronic all-metal separators recognise and remove metal particles from bulk materials that are transported in vacuum and pressure conveying lines. The metal recognition and separation takes place 'on the fly' with conveying speeds at up to 30 m/s. Special mechanical separation systems are used, depending on the type of ...

Model METRON Series - Metal Detectors

by Mesutronic Gerätebau GmbH     based in Kirchberg / Wald, GERMANY

METRON metal detectors can be easily integrated into your production process. Special versions such as »SlimLine« and »RMFA«, are available for diffi cult applications such as low headroom or extraordinary peripheral eff ects. MESUTRONIC metal detectors are also available as a system solution in combination with a TRANSTRON ...

Need help finding the right suppliers?

Let the XPRTs do the work for you