Magnetic Separation Services For Waste And Recycling Available In West Virginia
-
Manufactured by Dhara Petrochemicals Pvt. Ltd. (DPPL)based in INDIA
Pneumatic Suction feeders for Basic Raw Material. Metal Separator for Ferrous and Non-ferrous Material. Pre-Mixers - 4 nos. capacity of 100 - 350 Kgs. each. Spiral and Pneumatic Conveying Systems. Storage Silos - 5 nos. total capacity of 6000. Double Cone Vacuum Dryer - with Nitrogen blanketing. Nitrogen Plant capacity - 5 Nm3- purity level of 99.998 %. Air Scrubber for processing drug-filled ...
-
based in USA
Navigation — Map obstructions with sonar, seismic & electromagnetic ...
-
based in USA
The Breakdown: Processing starts with shredding the tire, a primary reduction step that reduces the volume of tires and creates a material that is easily handled. Tire shredders typically shear tires with two counter rotating shafts, producing 2-inch pieces. To further break down scrap tires, Liberty Tire Recycling uses one of two systems – mechanical or ...
-
based in USA
Dynamic Recycling is a full service computer and electronics recycling corporation. You can be rest assured that all electronics sent to and processed by Dynamic Recycling will be recycled properly and ...
-
based in AUSTRALIA
Most Australian councils have recycling services and this is the appropriate recovery channels for those materials. However, when people cannot or do not use those channels, Global Renewables acts as a safety net recovering recyclables like plastic, paper and metals from household waste. Similarly, as a responsible company, Global Renewables also recovers hazardous or dangerous materials such as ...
-
Manufactured by Chemdoc Water Technologiesbased in FRANCE
Whether it comes from the natural environment (groundwater or surface water) or from a borehole, the water must be pre-treated in order to be able to be ...
-
Distributed by SV Recycling Equipmentbased in SPAIN
Our recycling solutions for scrap metal processing are backed by more than 50 years of experience. We offer our customers machinery, plants and equipment for metal shredding and separation with an incredible investment/profitability ratio. ...
-
Manufactured by ISurTec: Innovative Surface Technologies, Inc.based in USA
Passivate your immunoassay surfaces against non-specific adsorption (noise) with ISurBlock solutions. ISurBlock improves Signal/Noise while increasing reproducibility compared to ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
Bunting operate a fully equipped laboratory utilising the most modern and efficient forms of laboratory magnetic separation equipment. Customer Experience Centre for Separation and Detection. Bunting’s Redditch manufacturing facility is home to one of the world’s most complete laboratories for Magnetic Separation and Metal Detection equipment. Mineral processing, mining and recycling ...
-
based in NETHERLANDS
Liquisort upgrades and/or sorts various metal fractions. Where conventional sink/float systems can sort at a maximum density level of only 3,5 kg/dm3, the MDS technology exceeds this by far as it can sort metal fractions into clean aluminium, zinc-, copper rich-, lead- and precious metal fractions. If you are interested and you would like to upgrade your metal fractions please do not hesitate to ...
-
Manufactured by Landmark Plastic Corporationbased in USA
All of our injection molded and thermoformed products are made right in our own 200,000 sq.-ft. manufacturing facility. And we keep the grower’s needs in mind throughout the entire process. Our experienced production, tool engineering and logistics teams have the understanding and capabilities to produce products that solve problems, making life just a bit easier for ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
Installing Products for Optimal Magnetic Separation. Bunting can offer a commissioning service, for customers who require assistance when installing our equipment. Incorrect installation will prevent our products from performing to their full capability, resulting in an insufficient level of separation. Our experienced Bunting Engineers are able to provide assistance with the set-up of your ...
-
Manufactured by Magnetic Products, Inc. (MPI)based in USA
The MPI test center features a wide range of metal control equipment from magnetic separation, conveying and electronic inspection. The test center allows MPI to validate customer applications for separation rates, detection performance levels and proper conveyance of parts. Utilizing this extensive test facility has allowed MPI to deliver solutions that meet customer expectations for over 30 ...
-
Manufactured by West Salem Machinery Co. (WSM)based in USA
WSM is the leader in supplying pallet and wood waste grinding systems to the pallet industry. From our High Torque Grinders in both hopper feed and horizontal feed configurations — to high volume fiber processing systems with Horizontal Hogs — to the "Brute" portable grinder, WSM provides effective solutions for converting expensive wood waste into marketable wood fiber.Pictured is ...
-
Manufactured by Andrin SAbased in FRANCE
Decades of practical experience serving our customers. We develop our buildings, adapt them to changing your processes and needs, in conjunction with our electrical and mechanical integrated engineering. We perform product characterization tests. Do not hesitate to contact us, we will adapt us to your lifting technology or magnetic separation of ferrous and non-ferrous metals ...
-
based in USA
Recycling & Dismantling A well-planned recycling program during dismantling or demolition provides an improved return-on investment when properly executed. Ferrous and non-ferrous metals are separated by material types. Contamination of other materials must be prevented to increase the value and facilitate easier reprocessing for the ultimate recycling facility. When metals need to be ...
-
based in GERMANY
Waste cables are a major source of raw materials in terms of their non-ferrous metal content. Materials in waste cables need to be recycled due to economic and ecological ...
-
Manufactured by Eldan Recycling A/Sbased in DENMARK
Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), ...
-
based in NETHERLANDS
The recovery of non-ferrous metals is carried out at our own site through our innovative, self-managed sorting equipment which has been designed in-house. The sorting equipment is continuously adjusted to the non-ferrous concentrates that need to be separated. This makes Aerinnova a trendsetter when it comes to the precise recovery of pure non-ferrous metals from bottom ash. ...
-
Manufactured by Bunting - Redditchbased in UNITED KINGDOM
Available for next day delivery! At Bunting we understand the importance of keeping your machines running smoothly and avoiding costly downtime. With over 2000 genuine spares held in stock at our Redditch manufacturing facility, our customers can expect any of these parts to be sent out on a same day ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you