Magnetic Sorting Equipment For Waste And Recycling Available In Ohio
-
PremiumManufactured by Regulator-Cetrisabased in SPAIN
The Permanent Magnetic (R-BMP) or Electromagnetic (R-BME) Block attracts the ferrous metals, but unlike the overband, there is no automatic extraction system. The cleaning is ...
-
PremiumManufactured by Granutech-Saturn Systemsbased in USA
Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable ...
-
PremiumManufactured by Lindner-Recyclingtech GmbHbased in AUSTRIA
Metals are precious raw materials that can be recycled and formed into new products most ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
A Magnetic Disc Separator utilises electromagnetic forces to separate minerals of differing magnetic susceptibilities. Typically, a Magnetic Disc Separator will feature up to three high-intensity electromagnetic discs, each set at a different height from a feed conveyor. The first disc will be set the furthest from the feed material, in order to extract only the most magnetically susceptible ...
-
Manufactured by A & A Magnetics Inc.based in USA
Hand sorting table magnets insure easy separation of steel and bi-metal cans from aluminum cans. Primarily used in the metal separation process of the beverage industry, these magnets are fixed under the hand sort table. Products flow over the magnet, which holds steel and bi-metal cans allowing aluminum cans to pass ...
-
Manufactured by Magnetic Separations Ltd.based in UNITED KINGDOM
STEINERT Magnetic Head Pulleys attract smaller pieces of tramp iron from bulk materials, where otherwise a normal idler pulley is integrated in the conveyor belt system. This is the easiest and most efficient method, and eliminates the need to make extensive modifications to your plant. Magnetic head pulleys protect your valuable processing equipment from wear and damage and recover fine-grained ...
-
Manufactured by Industrial Magnetics, Inc. (IMI)based in USA
This handy new magnetic pole tester provides an instant zero-delay magnetic pole indication. Just press the push-button to activate the built-in electronic circuitry that will indicate the appropriate magnetic pole via LEDs at ...
-
Manufactured by Industrial Magnetics, Inc. (IMI)based in USA
Need to see around corners or tight spots? These Mirrors telescope or bend, have a slim profile and have joints that can swivel and/or rotate. Models 311 & 317 have a locking hinged mirror that allows for 180° of positioning. 321S-A can be bent to a permanent position or the inside stiffening wire can be removed to snake it into position. The 3714SW is a large dolly mounted inspection ...
-
Manufactured by Eriez Magnetics Europe Ltdbased in UNITED KINGDOM
Magnetically designed to provide enhanced separation of non-ferrous metals, the REvX ecs enables the effective separation of non ferrous material whatever the application. Available in different configurations to achieve maximum separation, Eriez standard eddy current separators are ideally suited for purifying cullet and plastics, and recovered valuable metal from secondary metals and ...
-
Manufactured by Hankook Matics Co.,Ltd (HKM)based in SOUTH KOREA
This drum magnetic separator is a sorting equipment of small magnetic material approx. 50mm particle size according to the rotation direction on the surface while rotating the exterior drum. The separator is installed with magnets over only half its area. Various magnetic force design is available depending on the condition of raw ...
-
Manufactured by WENDT CORPORATIONbased in USA
The ferrous downstream system is designed to separate and recover shredded steel. For the best results, a combination of large axial pole drum magnets and air classification are used. We also offer systems utilizing a series of drum magnets if lesser quality shred is acceptable. ...
-
Manufactured by Electro Flux Equipments Pvt Ltdbased in INDIA
Electro Flux is an Over band magnetic separator manufacturer and over band magnetic separator supplier in India. OVER BAND ELECTRO MAGNETIC SEPARATORS is one of the magnetic separators that attracts ferrous particles, suspended above a conveyor belt where Mild steel materials are lifted up from the conveyor. The attracted iron particles are held against the bottom side surface of the separator ...
-
Manufactured by Kiverco Recycling Systems Ltd.based in NORTHERN IRELAND
The 3D Combi screen is designed for the highly effective screening of difficult e.g. sticky or wet materials, with a wide variety of separation cuts from 0.2mm to 120mm possible. The 3D upper deck screen segments are arranged to form a cascade, preventing long pieces from passing into the mid-size material. As a result, the material feed can be optimally loosened up and turned ...
-
Manufactured by Kiverco Recycling Systems Ltd.based in NORTHERN IRELAND
Flip Flow screens are designed to effectively screen difficult (e.g. sticky or wet) material between 0.2mm and 50mm. Within the structure of the Flip Flow Screen the relative movement of both screening frames creates a ‘trampoline effect’ for the screening mats. This rigorous action loosens up the most difficult to treat materials and prevents ...
-
Manufactured by Kiverco Recycling Systems Ltd.based in NORTHERN IRELAND
Ballistic separators are designed for sorting and separating 2D material e.g. paper, plastic, film, card from 3D material e.g. plastic bottles, containers, wood. Material is broken down into a rolling, flat and sieved fraction. Fine particles are screened through the paddles. The lighter 2D material travels upwards in the direction of the paddles whilst the heavier 3D material bounces or rolls ...
-
Manufactured by Andrin SAbased in FRANCE
Permanent overband magnets, OVBPs, may be used on all types of bulk products, on conveyors, vibrating lines or chutes. They are intended for: protecting the plant against ferromagnetic parts, refining and magnetic sorting of transported ...
-
Manufactured by Deep Greenbased in BELGIUM
The physico-chemical treatment is a separation treatment by particle size, gravimetric and magnetic sorting. The contaminants adsorbed on the fine particles, previously separated from the coarse particles, are transferred to the aqueous phase and the treatment consists of a concentration of the pollutants in a small volume of soil (the most polluted) thanks to the separations and attritions used ...
-
Manufactured by Goudsmit Magnetics Groupbased in NETHERLANDS
Cost-effective. Overbelt placement or installation against a free-fall line. Often used in the recycling industry or for protection of downstream ...
-
Manufactured by Vulcan Drying Systemsbased in USA
Condition New. Size (WxL) 16"x32". Material Of Construction Carbon Steel. Belt Surface 61" long x 18" wide. Electric motor 3/4 hp, 230/460 V, 3-phase electric ...
-
Manufactured by Kiverco Recycling Systems Ltd.based in NORTHERN IRELAND
Optical sorting is a high tech sensor-based method of sorting waste. This automated method of sorting delivers clean material fractions at significantly higher recovery and purity rates when compared to traditional manual methods of sorting, resulting in increased value for your material fractions. Our main partners for optical sorting solutions is Steinert and Tomra who are both renowned for the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you