Material Recycling Applications

143 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

Recycling of Paper / Recycling of Cardboard

by eFACTOR3 LLC     based in Pineville, NORTH CAROLINA (USA)

The recycling of paper and cardboard often requires a shredding process to improve the pulping process or to put more weight into the bale. The M&J Shredder line is very effective for reducing the amount of fines in the shredded product. For small volume applications we also offer the WEIMA Single shaft shredder. In many cases these units are used in smaller paper recycling applications were the material is baled. The benefit of shredding before baling is an increased bale weight, and we also offer separation technology to separate contaminates from the paper stream.

Handling hospital waste and laundry

by Envac AB     based in Stockholm, SWEDEN

Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

Waste Treatment for Green Waste

by MENART     based in Dour, BELGIUM

Green waste is organic waste collected after cleaning open green spaces, recreational zones, private gardens, greenhouses, sports fields, roads. Open-air burning, public rubbish/trash collection or incineration have numerous negative impacts and are often banned. Composting is therefore the most adapted treatment solution for green waste. Due to its specialisation in high-level equipment adapted to intensive use, Ménart equips composting platforms. Ménart’s machines are robust and easily serviced and offer total user satisfaction.

Waste recycling systems for composting

by Kiverco Recycling Systems Ltd.     based in Dungannon, NORTHERN IRELAND

Kiverco specialise in the design, manufacture, and installation of compost recycling systems that will be unique to your compost recycling requirements. By combining our forward thinking design, use of latest technologies and high quality manufacture Kiverco can ensure the longevity of your Composting recycling plant and its maximum productivity potential.

Walk Behind Sand Sifting and Soil Screening Applications

by H. Barber & Sons, Inc.     based in Naugatuck, CONNECTICUT (USA)

The SAND MAN 850 is a versatile sand sifter and soil screener that has a wide variety of applications. Its inherent manueverability, effectiveness, and ease of operation make it a valuable tool for golf course owners, small beach owners, and anyone who maintains smaller sandy areas. By screening stones, litter, shells, glass, and other finer objects, the SAND MAN ensures your property will be debris-free.

Waste Treatment for Waste Preparation

by MENART     based in Dour, BELGIUM

Material sorting and preparation is essential for effective product valorisation. Aware of this aspect, Ménart has participated in pioneering projects, equally in the preparatory stage of diverse organic waste destined for biogaz valorisation, through composting or co-generation, and in the sorting of household and industrial waste to be recycled, for example, for combustible waste.

Automated solutions for the municipal sludge recycling using dredges

by Liquid Waste Technology LLC (LWT LLC)     based in New Richmond, WISCONSIN (USA)

LWT`s dredging systems can be used for municipal sludge recycling applications. Sludge is mixed with compost and used in nurseries, sod farms, and agricultural applications.

Recycling equipments for electronic waste recycling (WEEE)

by Eldan Recycling A/S     based in Faaborg, DENMARK

The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

Waste shredding for municipal waste plants

by Lindner-Recyclingtech GmbH     based in Spittal/Drau, AUSTRIA

There are valuable resources in waste that have to be extracted. Being specialists in the processing of waste of all kinds – first and foremost in the area of refuse derived fuels – we constantly work on the advancement of our solutions for customer-oriented and cost-effective shredding.

Solutions for the waste sector

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

There is an increasing global awareness that the waste problem needs to be solved in a sustainable way. New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective, how to best use or reuse certain products, and where to create new markets and demands.

Solutions for the energy sector

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective.

Shredders for Paper and Cardboard Tubes Treatment

by SA Eng Soluzioni per l`Ambiente     based in San Donà di Piave, ITALY

Paper and cardboard even if already selected during their collection, should be further separated to increase the commercial value of the prdouct itself. For that reason, SA Eng is proposing semi-automatic selection systems to separate the different kind of paper (printed or blank) and cardboard. Particular attention is given to the cardboard cores for which has been developped a specific machine for their shredding.

Shredders for Electric and Electronic Equipment (WEEE) and Refrigerators

by SA Eng Soluzioni per l`Ambiente     based in San Donà di Piave, ITALY

Electric and electronic waste (WEEE), are coming from technology products such as home appliances (washing machines, vacuum cleaners), computers and tools. An economy based on the consumption such as today, provides a continuous increase of WEEE, and determines an increasing risk of dropping out in the environment or in landfills, with the consequences of pollution of soil, air, water and health human repercussions. These products should be handled properly and used for the differential recovery of the materials they are made of, such as copper, iron, steel, aluminum, glass, silver, thus avoiding a waste of resources that can be reused to build new equipment in addition to the environmental sustainability.

Recycling Equipment for Municipal Solid Waste

by Bollegraaf Recycling Machinery BV     based in Appingedam, NETHERLANDS

Optimizing output in terms of economic value against the lowest possible costs per tonne. This is the short-term goal for every installation that Bollegraaf provides. The long-term goal is to ensure permanently low operatingcosts and achieve an optimal return on investment.

Packaging Sorting

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility). However, this does not present us with a problem. At TOMRA Sorting, regardless of the collection system operated, we are able to optimally sort the valuable fractions with high efficiency and purity. We currently operate sorting units at packaging MRF’s in many countries including Belgium, Canada, Germany, Italy, The Netherlands, Spain, UK and USA.

Need help finding the right suppliers?

Let the XPRTs do the work for you