material recycling Equipment available in Nicaragua

Available in Nicaragua| Near Nicaragua
681 Results found

We couldn't find any material recycling equipment in Nicaragua

Here is a list of results available in Nicaragua

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

  • Keyword: material recycling ×

  • Available in: Latin America ×

  • Available in: Nicaragua ×


Eldan - Model UP1500 / UP1750 / FP1500 / FP1750 - Aspirators for Tyre Recycling

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Eldan Aspirators are used in tyre recycling to separate the textile from the rubber granulates and to classify the rubber granules into three sizes and dust.

Macpresse - Model MAC/2 Series - Multi-Material Balers for Recyclables

by Macpresse Europa S.R.L     based in Vernate, ITALY

In 2001, when we launched our new waste baler MAC/1 series, we were confident of its reliability, strength and simplicity. Over the years, we have proudly seen a huge increase in satisfaction and confidence in our company by our customers who keep choosing our balers. Their needs and advice as well as our international dealers’ suggestions ...


Macpresse - Model Mac 108/1 Series - Waste Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 108/1 series has been appropriately designed to bale medium-large quantities of of recyclable material. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 110/1 Series - Balers

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 110/1 series has been appropriately designed to bale large quantities of  recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Tandem Line - Model GM 125 - Thermoplastics Materials Recycling System

by Gamma Meccanica SpA     based in Bibbiano (RE), ITALY

For recycling of heavily printed thermoplastics materials Gamma Meccanica S.p.A. realized the new Tandem line. The Tandem line ensures the recycling of heavily printed thermoplastics materials, or with humidity over  12% and contaminated. The plant is composed of a COMPAC and two extruders arranged in “tandem”. The effectiveness ...

Macpresse - Model MAC 111/1 - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 111/1 series has been appropriately designed to bale large quantities of recyclable materials Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 111AS/1 - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 111AS/1 series has been appropriately designed to bale large quantities of  recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 102 Series - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 102 series has been appropriately designed to bale medium-small quantities of waste paper, plastic and a variety of recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 112 XL Series - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 112 XL series has been appropriately designed to bale large quantity of recyclable materials. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 106 Series - Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 106 series has been appropriately designed to bale medium quantities of waste paper and plastics. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Macpresse - Model MAC 107 - Series Baler

by Macpresse Europa S.R.L     based in Vernate, ITALY

The MAC 107 series has been appropriately designed to bale medium quantities of waste paper and plastics. Thanks to its great work flexibility this model can bale all types of waste paper, plastic containers, aluminium cans, food tins and many more recyclable products.

Scrap Material Recycling Technology

by The David J. Joseph Company (DJJ)     based in Cincinnati, OHIO (USA)

Every year, our nation generates over 70 million tons of scrap material that - if not recycled - could end up in landfills. Converting this scrap metal into a valuable replacement for virgin raw materials while still protecting the environment takes more than hard work.  It takes the most innovative technology available. Which is exactly what ...

Eldan - Model WST - Water Separation Table (System)

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will have a ...

Eldan - Model C12 / C15 / C22 / C26 - Separation Tables

by Eldan Recycling A/S     based in Faaborg, DENMARK

The Eldan Separation Table in an essential machine for material separation in recycling of e.g. Cables (aluminium or copper), Electronic and electrical waste (i.e. WEEE), Aluminium scrap, Tyres (upgrading quality by removing foreign objects), Shredder light fraction (SLF/ASR).

Sorting Lines and Material Recycling Facilities (MRF)

by IMABE IBERICA S.A.     based in Arganda del Rey, SPAIN

Waste sorting and treatment plants for waste processing, recovery of recyclables. IMABE design and manufacture tailor-made sorting plant according to the type and characteristics of residues and customer particular needs.


Erdwich - Systems for Refrigerator Recycling Process

by Erdwich Zerkleinerungssysteme GmbH     based in Kaufering, GERMANY

Technologically advanced solutions for refrigerator shredding and processing. One particular challenge in the refrigerator recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when ...

Hazardous Waste Shredding

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements. Granutech’s Saturn Shredders are ...

Industrial Plastics Shredding

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade ...

Wood & Paper Shredders

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Wood and paper shredders are designed to process paper, cardboard, wood products and pulper waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper and wood products. In addition, paper shredders are used to ensure secure and total destruction of documents.

Granutech-Saturn - Model 160H - Roto-Grind Shredder

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The Granutech-Saturn Roto-Grind shredder is a single rotor shredder which utilizes a load sensing feed ram design to continuously supply (unattended) size reduced material for downstream processing. The Roto-Grind shredder uses a solid steel rotor with multiple cutters, adjustable stationary cutters, a large feed hopper and a horizontal feed ram ...

Need help finding the right suppliers?

Let the XPRTs do the work for you