material recycling equipment Equipment available in Cayman Islands

Available in Cayman Islands| Near Cayman Islands
329 Results found

We couldn't find any material recycling equipment equipment in Cayman Islands

Here is a list of results available in Cayman Islands

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

  • Keyword: material recycling equipment ×

  • Available in: Latin America ×

  • Available in: Cayman Islands ×

Macpresse - Model MAC/2 Series - Multi-Material Balers for Recyclables

by Macpresse Europa S.R.L     based in Vernate, ITALY

In 2001, when we launched our new waste baler MAC/1 series, we were confident of its reliability, strength and simplicity. Over the years, we have proudly seen a huge increase in satisfaction and confidence in our company by our customers who keep choosing our balers. Their needs and advice as well as our international dealers’ suggestions ...

Granutech-Saturn - Model 160H - Roto-Grind Shredder

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The Granutech-Saturn Roto-Grind shredder is a single rotor shredder which utilizes a load sensing feed ram design to continuously supply (unattended) size reduced material for downstream processing. The Roto-Grind shredder uses a solid steel rotor with multiple cutters, adjustable stationary cutters, a large feed hopper and a horizontal feed ram ...

Saturn - Powderizers

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Saturn brand Powderizers produce materials from 6 mesh to 30 mesh, using 1/4' to 3/8' granulate as feed. Using a controlled feed device, our high performance Powderizers can generate output rates between 12 Ibs./minute and 30 lbs./minute, depending on screen and feedstock size.

Granutech-Saturn - Model Mac L3600 - Logger

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

At Granutech-Saturn Systems Grand Prairie, Texas facility, the latest in manufacturing and assembly technologies are teamed up with an intangible: the commitment to excellence inherent in the MAC manufacturing workforce. The result of this pairing is the industry’s highest level of performance and reliability.

Hazardous Waste Shredding

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The disposal of hazardous waste requires special handling to ensure that safety and regulatory requirements are met. Preparing the waste for incineration or burial requires equipment that is durable and reliable so that the materials are processed safely and in accordance with the regulatory requirements. Granutech’s Saturn Shredders are ...

Industrial Plastics Shredding

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade ...

Wood & Paper Shredders

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Wood and paper shredders are designed to process paper, cardboard, wood products and pulper waste. The shredded material is then used to manufacture new products, enabling manufacturers to efficiently recycle paper and wood products. In addition, paper shredders are used to ensure secure and total destruction of documents.

Electronic Scrap shredding & Processing- E-Scrap

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, IT equipment and white goods need to be destroyed to extract recyclables or ensure the security of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic ...

Non-Ferrous Metal Scrap Processing

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Our lineup of nonferrous shredding equipment is the most comprehensive in the business, which includes dual and quad shaft shredders to process whole bales and which can be used as pre-shredders or final size reduction depending on the way they are equipped. Our MAC® Balers and loggers offer low and high density bale and log options and can be ...

Solid Waste Shredding & Recycling

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and ...

Waste-to-Energy Recycling

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Our products are well suited to process materials with the ultimate goal of producing energy from waste . ALTERNATIVE FUEL APPLICATIONS: TDF (Tire-Derived Fuel) RFF Pyrolysis (gasification) RDF (Refuse-Derived Fuel) ASR (Auto Shredder Residue) Bio-Mass APPLICABLE POINTS OF CONSUMPTION: Cement plants Steel mills Hazardous waste fuel blenders ...

TOMRA - Model AUTOSORT - Multifunctional Sorting System

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The AUTOSORT is a multifunctional sorting system to recover a wide range of pieces of material from different waste streams, single stream, packaging, paper, household waste and other sorting tasks looking for enhanced material information and color in combination.

BAITRACK - Mobile Recycling Unit

by Baioni Crushing Plants Spa     based in Monte Porzio, ITALY

The BAITRACK mobile units are designed for producing aggregates, for primary crushing in quarries and for recycling construction/demolition materials. They can be used with any type of minerals and rocks, even if particularly hard and abrasive. These units can reduce production costs remarkably while at the same time guaranteeing high ...

TOMRA - Model FINDER - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The FINDER is specialized to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

ANDRITZ MeWa - Model UG Series - Universal Granulator

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

The Universal Granulator UG of ANDRITZ MeWa processes a variety of different materials to high quality results and convinces in particular due to the dynamic application and the shredding results. The Granulator UG series consists of four different machine sizes: The Granulators UG 600, UG 1000, UG 1600 and UG 2000. The equipment of the machine is ...

ANDRITZ MeWa - Recycling Plants for Pulper Rags and Rejects

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

Waste paper is usually delivered to paper mills in pressed bales held in shape by wires. The stock preparation process generates rags that comprise wires and other rejects. Rejects are all those materials that are not paper, such as plastics, textiles and metals.

ANDRITZ MeWa - RDF Production Plants

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

ANDRITZ MeWa supplies specific technologies, processes and equipment for the conversion of waste to energy. This includes equipment for shredding, screening, classification and drying. The outcome is valuable goods, such as high-calorific RDF, as well as non-combustible fractions.

ANDRITZ MeWa - Model QZ - Universal Cross-flow Shredder

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

The Universal Cross-flow shredder QZ does completely without the use of knives and opens up the input material particularly gently and quickly using impact forces. In comparison with conventional cutting systems the QZ offers significant advantages concerning the result and wear.

ANDRITZ MeWa - Recycling Plants for Electrical and Electronic Scrap

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

For each type of electrical and electronic waste ANDRITZ MeWa offers individually tailor-made plant solutions, which meet all requirements of the European WEEE Directive. With the Universal Cross-flow shredder QZ, ANDRITZ MeWa has developed a particularly effective and environmentally friendly technology, which has led the way throughout Europe, ...

ANDRITZ MeWa - Recycling Plants for Automotive Parts

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

Whenever metal is involved, the ANDRITZ MeWa technology can prove its strengths. Especially components from end-of-life vehicles (ELV), like tires, oil filters, catalytic converters and motor blocks, contain a variety of valuable raw materials for which ANDRITZ MeWa has developed pioneering solutions.

Related Terms for material recycling equipment

Need help finding the right suppliers?

Let the XPRTs do the work for you