material recycling equipment Equipment available in Sri Lanka

Available in Sri Lanka| Near Sri Lanka
308 Results found

We couldn't find any material recycling equipment equipment in Sri Lanka

Here is a list of results available in Sri Lanka

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

  • Keyword: material recycling equipment ×

  • Available in: Asia & Middle East ×

  • Available in: Sri Lanka ×


Model Series MAC/2 - Multi-Material Balers for Recyclables

by Macpresse Europa S.R.L     based in Vernate, ITALY

In 2001, when we launched our new waste baler MAC/1 series, we were confident of its reliability, strength and simplicity. Over the years, we have proudly seen a huge increase in satisfaction and confidence in our company by our customers who keep choosing our balers. Their needs and advice as well as our international dealers’ suggestions ...

Granutech-Saturn - Model 160H - Roto-Grind Shredder

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

The Granutech-Saturn Roto-Grind shredder is a single rotor shredder which utilizes a load sensing feed ram design to continuously supply (unattended) size reduced material for downstream processing. The Roto-Grind shredder uses a solid steel rotor with multiple cutters, adjustable stationary cutters, a large feed hopper and a horizontal feed ram ...

GRANUTECH Saturn - Powderizers

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

GRANUTECH Powderizers produce materials from 6 mesh to 30 mesh, using 1/4' to 3/8' granulate as feed. Using a controlled feed device, our high performance Powderizers can generate output rates between 12 Ibs./minute and 30 lbs./minute, depending on screen and feedstock size.

Granutech-Saturn - Model Mac L3600 - Logger

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

At Granutech-Saturn Systems Grand Prairie, Texas facility, the latest in manufacturing and assembly technologies are teamed up with an intangible: the commitment to excellence inherent in the MAC manufacturing workforce. The result of this pairing is the industry’s highest level of performance and reliability.


TITECH - Model autosort - Multifunctional Sorting System

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The TITECH autosort is a multifunctional sorting system to recover a wide range of pieces of material from different waste streams, single stream, packaging, paper, household waste and other sorting tasks looking for enhanced material information and color in combination.

BAITRACK - Mobile Recycling Unit

by Baioni Crushing Plants Spa     based in Monte Porzio, ITALY

The BAITRACK mobile units are designed for producing aggregates, for primary crushing in quarries and for recycling construction/demolition materials. They can be used with any type of minerals and rocks, even if particularly hard and abrasive. These units can reduce production costs remarkably while at the same time guaranteeing high ...

TITECH - Model Finder - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

The TITECH finder is specialized to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

Andritz MEWA - Model UG - Granulator

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

Trimmed for performance, or equipped with even higher transmission for processing heavy metal pieces, all granulators of the UNI-CUT UG Series are equipped with high power reserves. The rotors manufactured for all granulators are of strong, pure materials in special steel and are unique. Wrought from a cast mould, they are equipped with an ...

Barko - Model 80XL - Loaders

by Barko Hydraulics LLC     based in Superior, WISCONSIN (USA)

Equipped with more standard features than its competitors, the 80XL lasts longer, performs harder, and delivers the results you expect. There's nothing better than a Barko - Guaranteed!

MACH Separator Series (Screening Technologies)

by Machinex Industries Inc.     based in Plessisville, QUEBEC (CANADA)

Imagine a worry-free material separator that: Cuts Labor Costs, Saves Time, Increases Profitability.

CD-Express - Recycling Systems

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

The CD-Express from General Kinematics is a low cost, entry level recycling system designed for high efficiency recovery of material. The CD Express system is designed to handle up to 150 yards per hour (115 m3 / hr.)* for separation of OCC, wood, ferrous and non-ferrous metals, rock / cement, dirt / ADC, plastics, and other types of typical ...

Barko - Model 295 SE - Material Handlers

by Barko Hydraulics LLC     based in Superior, WISCONSIN (USA)

Barko’s stationary electric knuckleboom loaders (material handlers) provide increased work productivity, and the lowest total cost of ownership than any other product on the market. Regardless of your application, the Barko 295 SE consistently delivers up to 25% more loads. Equipped with more standard features than its competitors, the 295 ...

Model 695MH EPIC - Rugged Self-Propelled Carrier

by Barko Hydraulics LLC     based in Superior, WISCONSIN (USA)

Dependable. Exceptional. AWESOME. That's what customers say about the Barko 695MH Rugged Self-Propelled Carrier. It's equipped with EPIC, an advanced electronic control system, to make the 695MH POWERFUL. THRIFTY. SMART. It provides the best fuel efficiency, work productivity, and the lowest total cost of operation than any other product in its' ...

CD-XXL - Model C&D - Recycling Systems

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

The CD-XXL is a medium to high tonnage C&D recycling system designed for high efficiency recovery of material. Systems include primary and secondary screening, metals separation, air classification, and primary and secondary pick lines. Each system can be custom designed to meet your recovery objectives.

Morbark - Model 1600 - Tub Grinder

by Morbark, LLC     based in Winn, MICHIGAN (USA)

The largest tub grinder on the market, the Morbark 1600 Tub Grinder is able to power through and reduce materials from large land clearing or organic/wood waste programs. With an 11’2″ tub diameter, 15′ tub opening and a capacity of 20 cubic yards. With horsepower ranging from 1,050 to 1,200, this machine can power through tons ...

Dry Colorant Processing System

by Morbark, Inc.     based in Winn,, MICHIGAN (USA)

The process meters and applies dry colorant in the discharge area of the grinder during primary grind. This material can then be stockpiled or processed immediately. During final grind, water is added in the grinder and the hammermill action drives the color deeply into the wood, resulting in brilliant colored product at production rates limited ...

Crushing and Shredding Equipment

by CYBEX     based in Ashby de la Zouch, Leicesters, UNITED KINGDOM

The equipment comprises: Turbo diesel engine, Feed hopper. Nom. 1m twin shaft sizer. Forward product conveyor. Fifth wheel towing. The machine is in working order. The rolls need building up with weld to the required profile for the material being handled. The machine may be inspected and demonstrated in the UK. Additional photographs of this ...

Predator - Shredder

by Morbark, LLC     based in Winn, MICHIGAN (USA)

Easy access to hydraulics making maintenance easy and fast and minimizing downtime. Heavy-duty breaker beam allows sizing of the end product. Powerful cross belt magnet removes heavy ferrous metal contaminants from discharge stream/end product. Dual belt discharge system allows for increased discharge capacity. Dual rotors provide ...

Morbark - Model 1300B - Tub Grinder

by Morbark, LLC     based in Winn, MICHIGAN (USA)

The Morbark 1300B Tub Grinder combines heavy-duty construction with the latest technology, including the Morbark Integrated Control System, which allows you to monitor critical machine parameters. With a full breakaway torque limiter system, hydraulic augers and a laser-cut hammer mill, the 1300B tub grinder is the most popular grinder on the ...

CD-XL - Model C&D - Recycling Systems

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

CD-XL systems are the perfect way to get started in Construction & Demolition recycling. Systems include primary sorting with a single pick line for low to medium tonnages. CD-XL systems are easily expandable with additional sorting modules and pick lines as your customer base and inbound tonnage increases.The CD-XL system is designed for 250 ...

Related Terms for material recycling equipment

Need help finding the right suppliers?

Let the XPRTs do the work for you