material recycling equipment Equipment in Netherlands

53 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

  • Keyword: material recycling equipment ×

  • In: Europe ×

  • In: Netherlands ×

Ground Water Equipment

by Waste water technologies & Water recycling Natuurbeton Milieu     based in Nederweert, NETHERLANDS

The ground water equipment from Waste Water Technologies NB Milieu is adjusted to the specific water demands of each project. We make the well, place a pump, pull the pipes to the technical room, and install a complete water treatment with all pipes and puffers. In most cases it is possible to produce demineralized water directly from the well ...

MaTech - Model MultiStrip 2010 - Multifunctional Cable Stripper

by MaTech b.v. / MaTech International VOF     based in Mierlo, NETHERLANDS

The MultiStrip 2010 is a multifunctional cable stripper for professional use. The machine strips synthetic material cables with a diameter of 2mm up to 115mm, both synthetic material as lightly armored cable.

MaTech - Model MiniStrip 0010 - Multifunctional Cable Stripper

by MaTech b.v. / MaTech International VOF     based in Mierlo, NETHERLANDS

The MiniStrip 0010 is a multifunctional cable stripper for semi-professional use. The machine strips synthetic material cables with a diameter of 1.5mm up to 60mm.

MaTech - Model MaxiStrip - Multifunctional Cable Stripper

by MaTech b.v. / MaTech International VOF     based in Mierlo, NETHERLANDS

The MaxiStrip is a multifunctional cable stripper machine meant for professional use. The machine strips cables with a diameter of 2mm to 90 mm, both synthetic material as lightly armored cable.

Mavitec - Shop Return Press - Separation Press

by Mavitec Green Energy     based in Heerhugowaard, NETHERLANDS

The Shop Return Press separates the organic material from various non-organic materials (Packaging) by the pressing technique. The Shop Return Press is suitable for shop returns, restaurant returns, kerbside waste and many other products that needed to be pressed.

Mavitec - Washing Drum

by Mavitec Green Energy     based in Heerhugowaard, NETHERLANDS

The Washing Drum cleans the removed inorganic materials from the Food Depackaging or kerbside waste recycling systems. The inorganic material will be cleaned with warm water, to make it free from fats and other organic material. This process helps to reduce the weight and the volume of the non organic materials which results in lower costs for ...

Scrap Metal Recycling Plants

by Europe Recycling Equipment B.V.     based in PK Stegeren, NETHERLANDS

The scrap metal recycling plants are extremely heavy duty systems designed for processing scrap steel, electronic waste

Plastic Recycling Plants

by Europe Recycling Equipment B.V.     based in PK Stegeren, NETHERLANDS

The Universal Plastic Washing Plants are entry level recycling systems for rigid or flexible plastics with medium levels of contamination. These modular systems are capable of processing general plastics such as HDPE bottles, creates, PE films (post-consumer or agricultural), and PP woven bags.

Martinator - Model 500 - Hammer Mill

by Mavitec Green Energy     based in Heerhugowaard, NETHERLANDS

Function: The function of the Martinator hammer mill is to grind shop returns, restaurants returns and any other food products suitable for recycling and/or biogas additives.

Martinator - Model 700 - Hammer Mill

by Mavitec Green Energy     based in Heerhugowaard, NETHERLANDS

Function: The function of the Martinator hammer mill is to grind shop returns, restaurants returns and any other food products suitable for recycling and/or biogas additives.

TITECH - Model autosort - Multifunctional Sorting System

by TOMRA Sorting (TITECH)     Office in Winterswijk, NETHERLANDS

The TITECH autosort is a multifunctional sorting system to recover a wide range of pieces of material from different waste streams, single stream, packaging, paper, household waste and other sorting tasks looking for enhanced material information and color in combination.

TITECH - Model Finder - High Purity Metal Fractions Separator

by TOMRA Sorting (TITECH)     Office in Winterswijk, NETHERLANDS

The TITECH finder is specialized to separate high purity metal fractions from even the most difficult fractions in terms of composition, grain size and mix from mixed waste and metal streams.

Morbark - Model 1600 - Tub Grinder

by Morbark, LLC     Distributor in NETHERLANDS

The largest tub grinder on the market, the Morbark 1600 Tub Grinder is able to power through and reduce materials from large land clearing or organic/wood waste programs. With an 11’2″ tub diameter, 15′ tub opening and a capacity of 20 cubic yards. With horsepower ranging from 1,050 to 1,200, this machine can power through tons ...

Dry Colorant Processing System

by Morbark, Inc.     Distributor in NETHERLANDS

The process meters and applies dry colorant in the discharge area of the grinder during primary grind. This material can then be stockpiled or processed immediately. During final grind, water is added in the grinder and the hammermill action drives the color deeply into the wood, resulting in brilliant colored product at production rates limited ...

Predator - Shredder

by Morbark, LLC     Distributor in NETHERLANDS

Easy access to hydraulics making maintenance easy and fast and minimizing downtime. Heavy-duty breaker beam allows sizing of the end product. Powerful cross belt magnet removes heavy ferrous metal contaminants from discharge stream/end product. Dual belt discharge system allows for increased discharge capacity. Dual rotors provide ...

MultiBagger

by Morbark, Inc.     Distributor in NETHERLANDS

The MultiBagger presents an opportunity for the organic recycling industry. Built for rugged, everyday use, the MultiBagger can be used to bag compost, mulch, manure, gravel, larger stones, and other materials. It is the cost effective way to bag, compared to other motorized bagging machines that cost $75,000 and up - three times the cost of the ...

Model 1300 - VMill

by Morbark, LLC     Distributor in NETHERLANDS

Infeed chute attaches to impact hopper and directs material to hammermill rotor. Chute is constructed from 1/4” thick sides and 1/2” thick top and back. Standard chute opening for infeed conveyor is 50 1/2” wide and 43 15/16” high and includes a double debris curtain for material containment. Must specify infeed material ...

Granutech-Saturn - Model 160H - Roto-Grind Shredder

by Granutech-Saturn Systems     Distributor in NETHERLANDS

The Granutech-Saturn Roto-Grind shredder is a single rotor shredder which utilizes a load sensing feed ram design to continuously supply (unattended) size reduced material for downstream processing. The Roto-Grind shredder uses a solid steel rotor with multiple cutters, adjustable stationary cutters, a large feed hopper and a horizontal feed ram ...

GRANUTECH Saturn - Powderizers

by Granutech-Saturn Systems     Distributor in NETHERLANDS

GRANUTECH Powderizers produce materials from 6 mesh to 30 mesh, using 1/4' to 3/8' granulate as feed. Using a controlled feed device, our high performance Powderizers can generate output rates between 12 Ibs./minute and 30 lbs./minute, depending on screen and feedstock size.

Granutech-Saturn - Model Mac L3600 - Logger

by Granutech-Saturn Systems     Distributor in NETHERLANDS

At Granutech-Saturn Systems Grand Prairie, Texas facility, the latest in manufacturing and assembly technologies are teamed up with an intangible: the commitment to excellence inherent in the MAC manufacturing workforce. The result of this pairing is the industry’s highest level of performance and reliability.

Related Terms for material recycling equipment

Need help finding the right suppliers?

Let the XPRTs do the work for you