scrap processing Equipment available in Belarus

Available in Belarus| Near Belarus
76 Results found

We couldn't find any scrap processing equipment in Belarus

Here is a list of results available in Belarus

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

  • Keyword: scrap processing ×

  • Available in: Europe ×

  • Available in: Belarus ×

REDWAVE - Model M - Optical Sorting Machines for Electronic Scrap

by REDWAVE a division of BT-Wolfgang Binder     based in Gleisdorf, AUSTRIA

The induction system for the reduction of detrimental substances is able to recognise different metals, such as aluminium, copper, iron and stainless steel.

Andritz MEWA - E-Scrap Recycling System

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

The heart and soul of our WEEE recycling system is the UNI-CUT QZ Universal Querstromzerspaner. The procedure utilised achieves unrivalled results in regard to environmental impacts, recycling quotas and profitability. Average intakes of up to 15 t/h are attainable. The system was developed on the basis of the EU directive (WEEE) and exceeds all ...

Scrap Baling Machines

by Lyndex Recycling Systems Limited     based in TELFORD,, UNITED KINGDOM

Include all the latest features available from Lyndex Recycling Systems Ltd.

Syncro-Shear - Under-Mill Oscillators - Vibratory Conveyors

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics Under Mill Oscillators are specifically designed to handle the severe conditions found underneath auto-shredders and other abusive applications. Heavy-duty wear resistant troughs handle the impact of falling material while the exclusive General Kinematics Syncro-Shear drive is designed to handle the force of even the largest ...

Shear Take-Away Conveyors

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics shear take-away conveyors are specifically designed to handle the severe conditions found underneath shears in scrap processing operations. Heavy-duty wear resistant troughs handle the impact of falling material while the exclusive General Kinematics Syncro-Coil drive is designed to handle the force of even the largest impacts ...

Secondary Sorting solutions

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics secondary sorting solutions for scrap recovery can help increase sorting efficiencies and increase throughput. GK ECS and magnet feeders offer superior presentation to product recognition equipment, increasing sorting effectiveness. Location the GK DE-STONER air classifier prior to product recognition equipment concentrates ...

Genesis - Model GXT 225R - Scrap Shears

by GENESIS GmbH     based in Memmingen, GERMANY

The Genesis XT mobile shear is the industry’s next generation shear designed to process scrap more efficiently and fit on smaller carriers, reducing initial acquisition investments and hourly energy consumption costs.Shorter in length and height and lighter in weight, the GXT is a scrap shear and demolition shear that features a center of ...

ECS - Magnet Vibrating Feeders

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics high-stroke Para-Mount II Vibratory feeders are designed with superior transfer and enahnced presentation for increased material separation. The high stroke is a result of General Kinematics two mass drive system, which uses a low horsepower drive to impart vibration to an exciting force which amplifies the amount of energy into ...

GXP - Model 200R - Scrap Shears

by GENESIS GmbH     based in Memmingen, GERMANY

A perfect synthesis of performance and cost-effectiveness. With GENESIS XP scrap shears, you benefit from maximum power in work applications, fast cutting cycles for high cost effectiveness and minimum maintenance costs. GENESIS XP scrap shears are characterised by the high quality of their materials, solutions which are intelligent in every ...

Model 450 DX - Banding Chopper

by Sweed Machinery, Inc.     based in Gold Hill, OREGON (USA)

The newly designed Model 450 DX combines the chopping benefits of Sweed’s previous Model 450 WM and Model 450 WM XHD into one unit. It is the preferred scrap chopper to tackle high volumes of 3/4” steel banding with clips, plastic banding, light weight wire and other various manufacturing materials. It is also very versatile; this unit ...

RecycleDirect - Acculoader Horizontal Container Loader

by Recycle Direct Ltd.     based in Bridgend, UNITED KINGDOM

The only proven horizontal container loading system in the world with more than 60 installed units over the last 3 years. Discover a better way to load HMS 1 & 2 steel with this patented horizontal loading system.

Scrap Metal Recycling Plants

by Europe Recycling Equipment B.V.     based in PK Stegeren, NETHERLANDS

The scrap metal recycling plants are extremely heavy duty systems designed for processing scrap steel, electronic waste

Scrap Reclaim Systems

by Sterling Products, Inc.     based in New Berlin, WISCONSIN (USA)

Sterling's Film Reclaim Systems consist of fluff feed hoppers, fluff tanks, fluff blowers, film grinders, and trim conveying systems. Scrap recycling offers significant cost savings from reduced material consumption because scrap is restored to its original feedstock value. No additional heat history is added to the material, and there is less ...

Scrap Material Recycling Technology

by The David J. Joseph Company (DJJ)     based in Cincinnati, OHIO (USA)

Every year, our nation generates over 70 million tons of scrap material that - if not recycled - could end up in landfills. Converting this scrap metal into a valuable replacement for virgin raw materials while still protecting the environment takes more than hard work.  It takes the most innovative technology available. Which is exactly what ...

Tire Processing

by Shred-Tech Corp.     based in Cambridge, ONTARIO (CANADA)

The scrap tire processing industry is growing rapidly as the number of discarded tires increases, landfill capacity diminishes and environmental pressures mount. The development of end-use markets which consume scrap tires, including recycling, tire derived fuel (TDF), and tire derived aggregate (TDA) are being pursued by industry, the private ...

Saturn - Model 36 Diameter - Hammermill Shredder

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Ideal for non-ferrous scrap metal processing. The Saturn 36' hammermill/ringmill offers efficient size reduction of many different materials but is ideally suited for light-non ferrous applications such as loose tin, and used beverage containers (UBC recycling) as well as turnings recycling and bio-mass recycling.

URT - E-Scrap Recycling (WEEE-Recycling) Plant

by URT Umwelt- und Recyclingtechnik GmbH     based in Karlstadt, GERMANY

Since many years WEEE recycling plants, domestic appliances recycling plants and IT recycling plants are within URT's portfolio. These WEEE treatment plants are often combined with refrigerator recycling plants. But also numerous URT references are on the market, on which non-containing CFC waste electric and electronic appliances are solely ...

Andritz MEWA - Model UG - Granulator

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

Trimmed for performance, or equipped with even higher transmission for processing heavy metal pieces, all granulators of the UNI-CUT UG Series are equipped with high power reserves. The rotors manufactured for all granulators are of strong, pure materials in special steel and are unique. Wrought from a cast mould, they are equipped with an ...

Metal Recycling

by Metso Automation     based in Helsinki, FINLAND

Scrap is an internationally traded commodity much in demand as raw material for steel making. Different kinds of metal scrap require different processing due to size, thickness and composition of material. Metso therefore offers a wide range of efficient upgrading solutions for the fragmentation, compaction and separation of virtually every type ...

Eldan - Model SC1412/160 / SC2118/250 - Super Chopper

by Eldan Recycling A/S     based in Faaborg, DENMARK

A low speed and high torque makes the Super Chopper suitable for processing of tough materials. It is powered directly by Hägglund hydraulic motor and power unit enabling automatic reverse for overload protection thus minimizing knife damages. Adjustable knife clearance optimize the cut function. The knives can be reground multiple times on a ...

Need help finding the right suppliers?

Let the XPRTs do the work for you