scrap processing Equipment available in Arkansas

Available in Arkansas| Near Arkansas
59 Results found

We couldn't find any scrap processing equipment in Arkansas

Here is a list of results available in Arkansas

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Material Recycling ×

  • Keyword: scrap processing ×

  • Available in: USA ×

  • Available in: Arkansas ×

ANDRITZ MeWa - Recycling Plants for Electrical and Electronic Scrap

by ANDRITZ MeWa GmbH     based in Gechingen, GERMANY

For each type of electrical and electronic waste ANDRITZ MeWa offers individually tailor-made plant solutions, which meet all requirements of the European WEEE Directive. With the Universal Cross-flow shredder QZ, ANDRITZ MeWa has developed a particularly effective and environmentally friendly technology, which has led the way throughout Europe, ...

Scrap Baling Machines

by Lyndex Recycling Systems Limited     based in TELFORD,, UNITED KINGDOM

Include all the latest features available from Lyndex Recycling Systems Ltd.

Shear Take-Away Conveyors

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics shear take-away conveyors are specifically designed to handle the severe conditions found underneath shears in scrap processing operations. Heavy-duty wear resistant troughs handle the impact of falling material while the exclusive General Kinematics Syncro-Coil drive is designed to handle the force of even the largest impacts ...

Secondary Sorting solutions

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics secondary sorting solutions for scrap recovery can help increase sorting efficiencies and increase throughput. GK ECS and magnet feeders offer superior presentation to product recognition equipment, increasing sorting effectiveness. Location the GK DE-STONER air classifier prior to product recognition equipment concentrates ...

Syncro-Shear - Under-Mill Oscillators - Vibratory Conveyors

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics Under Mill Oscillators are specifically designed to handle the severe conditions found underneath auto-shredders and other abusive applications. Heavy-duty wear resistant troughs handle the impact of falling material while the exclusive General Kinematics Syncro-Shear drive is designed to handle the force of even the largest ...

ECS - Magnet Vibrating Feeders

by General Kinematics     based in Crystal Lake, ILLINOIS (USA)

General Kinematics high-stroke Para-Mount II Vibratory feeders are designed with superior transfer and enahnced presentation for increased material separation. The high stroke is a result of General Kinematics two mass drive system, which uses a low horsepower drive to impart vibration to an exciting force which amplifies the amount of energy into ...

Model 450 DX - Banding Chopper

by Sweed Machinery, Inc.     based in Gold Hill, OREGON (USA)

The newly designed Model 450 DX combines the chopping benefits of Sweed’s previous Model 450 WM and Model 450 WM XHD into one unit. It is the preferred scrap chopper to tackle high volumes of 3/4” steel banding with clips, plastic banding, light weight wire and other various manufacturing materials. It is also very versatile; this unit ...

AL-JON - Model 580CL - Car Logger Baler

by Al-jon Manufacturing, LLC     based in Ottumwa, IOWA (USA)

Fully portable one man operation and road legal. 540 degree crane rotation. Throttle inside cab. Pressure switch (log or bale) inside cab. Four corner hydraulic outriggers for stability. Continuous grapple rotation. L box design. High visibility operator’s station. Process loose tin and white goods into shredder acceptable logs or bales. ...

Al-jon’s - Model 400XL - Logger Baler

by Al-jon Manufacturing, LLC     based in Ottumwa, IOWA (USA)

Al-jon’s 400XL Baler has a curved box design and larger loading chamber that efficiently process bulky loose scrap, white goods and gauge material down to manageable 20 in. (50.8 cm) high x 32 in. (81.3 cm) wide variable length bundles (20 in. (50.8 cm) minimum).

Model 50P-16S - Scrap Cart

by MODRoto     based in Madison, INDIANA (USA)

This scrap cart handles getting raised up and dumped all day long. The Poly-Trux® 50P-16S scrap collection cart makes handling metal, paper, glass, plastic and other materials for recycling safe and simple. With three, steel fork tubes designed into the base, the innovative collection cart can be safely and easily picked up and transported by ...

Scrap Material Recycling Technology

by The David J. Joseph Company (DJJ)     based in Cincinnati, OHIO (USA)

Every year, our nation generates over 70 million tons of scrap material that - if not recycled - could end up in landfills. Converting this scrap metal into a valuable replacement for virgin raw materials while still protecting the environment takes more than hard work.  It takes the most innovative technology available. Which is exactly what ...

Scrap Reclaim Systems

by Sterling Products, Inc.     based in New Berlin, WISCONSIN (USA)

Sterling's Film Reclaim Systems consist of fluff feed hoppers, fluff tanks, fluff blowers, film grinders, and trim conveying systems. Scrap recycling offers significant cost savings from reduced material consumption because scrap is restored to its original feedstock value. No additional heat history is added to the material, and there is less ...

Tire Processing

by Shred-Tech Corp.     based in Cambridge, ONTARIO (CANADA)

The scrap tire processing industry is growing rapidly as the number of discarded tires increases, landfill capacity diminishes and environmental pressures mount. The development of end-use markets which consume scrap tires, including recycling, tire derived fuel (TDF), and tire derived aggregate (TDA) are being pursued by industry, the private ...

Metal Recycling

by Metso Automation     based in Helsinki, FINLAND

Scrap is an internationally traded commodity much in demand as raw material for steel making. Different kinds of metal scrap require different processing due to size, thickness and composition of material. Metso therefore offers a wide range of efficient upgrading solutions for the fragmentation, compaction and separation of virtually every type ...

Eldan - Model SC1412/160 / SC2118/250 - Super Chopper

by Eldan Recycling A/S     based in Faaborg, DENMARK

A low speed and high torque makes the Super Chopper suitable for processing of tough materials. It is powered directly by Hägglund hydraulic motor and power unit enabling automatic reverse for overload protection thus minimizing knife damages. Adjustable knife clearance optimize the cut function. The knives can be reground multiple times on a ...

Recycling Plants

by Nuova Idropress S.p.A     based in Canossa (RE), ITALY

The always more urgent necessity to recycle scraps of plastic materials and particularly the specific case of EPS scraps has led Nuova IDROPRESS S.p.A. to study and optimize a series of specific equipments:

ATN - Degasser for Domestic Fridges

by ATN Engineering B.V.     based in Stadskanaal, NETHERLANDS

Protecting the environment are key words when talking about the degassing and de-oiling of end-of-life refrigerators. To avoid any possible contamination of the environment, by refrigerant gasses or oil, ATN Engineering developed an unique concept. This makes it possible to supply an environmentally safe and highly efficient degassing and ...

ATN - Automatic Degassing of Domestic Fridges

by ATN Engineering B.V.     based in Stadskanaal, NETHERLANDS

Fully automatic degassing of domestic fridges is possible with the use of our unique and patented drill head. We build complete unites that are able to degas and drain oil from refrigerator compressors in less then one minute.

ATN - Degasser for Domestic Fridges and Airconditioning Units

by ATN Engineering B.V.     based in Stadskanaal, NETHERLANDS

ATN environmental systems developed a high pressure system(plant) for fast, easy and environmental save degassing an de-oiling of old refrigerators and AC units containing CFC/ODS gasses. ATN's patented drill head and special developed equipment will remove nearly 100% of oil and gasses.

ACTA - Norba Crusher

by ACTA Recycling ApS     based in Odense, DENMARK

Production waste - gypsum plasterboards as well as gypsum scrap - is crushed in order to be recycled in the production process. You just fill the hopper with complete boards and/or scrap and the crusher will do the rest - the paper will more or less be separated from the gypsum. The size of  the output is your choice in the flexible cutting ...

Need help finding the right suppliers?

Let the XPRTs do the work for you