Materials Recovery Facility Equipment For Waste And Recycling Available In Montana
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
High performance, lightweight, air-cooled electromagnetic overband. For conveyors 1000 to 1800mm wide at operating heights up to ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
Suspension Magnets extract occasional tramp iron from a conveyed product stream on a conveyor belt or vibratory feeder. The Magnet block suspends above a conveyor with sling chains setting the magnet face at the correct angle for optimum extraction. The magnetic field attracts ferrous metal out of the conveyed material and onto the magnet face, remaining securely held until manually cleaned. This ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
Aimed at the mobile equipment market. More compact and lightweight. For conveyors 600 to 1500mm wide at operating heights up to ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
The Magnetic Head Pulley replaces the head pulley of a conveyor and is available as either a Permanent or Electro model. In both designs, the magnetic field covers the entire 360-degree circumference of the pulley, ensuring that conveyed material is fully exposed to the magnetic extraction force at all times. The Magnetic Head Pulleys are custom built and available in a wide range of diameters ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
Heavy duty air cooled electromagnetic overband available for conveyors 500 to 3000mm wide at operating heights up to ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
Heavy-duty range designed mainly for recycling and quarrying industries to remove ferrous tramp. For conveyors 300 to 2000mm wide at operating heights up to ...
-
PremiumManufactured by Bunting - Redditchbased in UNITED KINGDOM
Fast belt change overband magnet for reduced downtime. For conveyors 600 to 1500mm wide at operating heights up to ...
-
based in USA
Everyone has a part to play in solving the waste diversion and resource recovery problem – Juno can help make you a part of the solution. Juno can divert up to 90% of the municipal waste it processes away from landfills and incinerators. These reclaimed materials are circulated back into the economy for future ...
-
Manufactured by Max-AIbased in NETHERLANDS
Max-AI® technology is an artificial intelligence system that identifies recyclables and other items for recovery. Through deep learning technology, Max-AI employs multi-layered neural networks, along with a vision system, to see and identify objects similar to the way a person does. The technology will drive improvements in Material Recovery Facility (MRF) design, operational efficiency, ...
-
Manufactured by Mapta Waste Management and New Energy Development Companybased in IRAN
Waste sorting or classification is the process, by which waste is separated into different elements. Sorting may be done manually in houses and collected through collection systems or be done automatically in materials recovery facilities or biological installations. Hand separation was the first method used in the history of waste sorting. Also sorting may be done at civic amenity ...
-
Manufactured by Anaergia Inc.based in CANADA
Anaergia’s unique OREX™ organic extrusion press technology optimizes organic waste recycling by extracting about 90% of putrescible organics from solid waste. When OREX is used at a high-diversion organic waste recycling facility, consumers don’t need to source separate their food waste. Waste haulers can eliminate separate collection bins and costly additional pickups, making ...
-
Manufactured by Sunchain (Xiamen) Technology Co., Ltdbased in CHINA
Sun MRF-I AL adjustable tripod mounting system is suitable for commercial and residential flat roof with highly pre-assembled & economical system. Panels can be placed in horizontal or vertical rows to minimize costs while ensuring structural strength. The support system is adjustable and the component angle can be changed by adjusting the pillar length. ...
-
Manufactured by Komar Industries Inc.based in USA
The KOMAR Viking II Hydro-Auger Industrial Shredder provides primary shredding of difficult, oversize or bulky waste at the lowest online operating cost of any volume reduction equipment. It handles a high volume of waste at low speed with minimum noise, dust and energy requirements. The Viking II industrial shredder utilizes high-torque, independent counter-rotating dual augers for aggressive ...
-
Manufactured by The CP Groupbased in USA
Electronic waste (E-waste) is one of the fastest growing segments of waste generated by the United States. With new technologies emerging at a rapid pace, outdated computers, cell phones, monitors and laptops are being discarded and are ready for “end-of-life management.” E-waste contains a variety of extremely valuable metals and plastics. E-waste also contains hazardous materials ...
-
Manufactured by SSI Shredding Systems, Inc.based in USA
SSI's 2500 Series of pre-load compactors are ideal compaction solutions for MSW transfer, material recovery and scrap facilities requiring less than 300 tons per day of throughput. The 2500 SPH pre-load compactor features a single stage, dual acting cylinder designed to form two high, density, square ended bales for transfering municipal solid waste, recyclables, or other commodities into highway ...
-
Manufactured by MSS, Inc.based in USA
If you are looking to extract either mixed plastics or specific plastic resins from low-grade input material (for example PVC from MSW that is intended to be turned into RDF) or sorting plastics by type at material recovery facility (MRF) the Sapphire module will provide with a perfect low-cost solution. The Sapphire features a full spectrum near infrared (NIR) sensor to analyze and classify ...
-
Manufactured by Kiverco Recycling Systems Ltd.based in NORTHERN IRELAND
Air density separation/ wind shifting /wind sifting is a method of separating waste based on the density of material using the principles of controlled air. The input material is separated into two fractions varying from light to heavy. Kiverco density separators feature a combination of twin recirculation fans, a separation area with rotating drum and an expansion chamber. The DS 150 is a ...
-
Manufactured by Rodan Engineering Company Ltd.based in UNITED KINGDOM
This machine will cut your production time in half! The cutters in this machine are 4" thick, hot die forged and machined to finished profile from a solid alloy with patented ribbed edge. The cutters are then assembled in a precision cleaning finger frame assembly with cleaning finger cutter ...
-
Manufactured by The CP Groupbased in USA
The McMRF® is CP Group’s answer to the rising need for compact systems with the benefits of a larger facility. Built from the highest quality machinery, the McMRF® delivers excellent recovery rates and material quality. Modular and scalable, the McMRF® is an affordable solution that is custom-made to fit your material-recovery needs and spacial ...
-
Manufactured by Enventix, Incbased in USA
Enventix'ss patent-pending Enpresso system enables clean, renewable electricity from mixed waste or other low-grade feedstocks at the distributed scale. It generates pure syngas for a gas turbine without the addition of oxygen. The process converts waste to energy 2-6 times more effectively than competing systems while exceeding any standard for air ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you