Medical Waste Equipment available in Congo, Democratic Republic of the

Available in Congo, Democratic Republic of the| Near Congo, Democratic Republic of the
195 Results found

We couldn't find any results in Congo, Democratic Republic of the

Here is a list of results available in Congo, Democratic Republic of the

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • Subcategory: Medical Waste ×

  • Available in: Africa ×

  • Available in: Congo, Democratic Republic of the ×

The Residents

by Dansk Skraldesug ApS     based in Odense, DENMARK

For the residents of the building there will be no change to the everyday handling of their refuse, but they will be without all the disadvantages that previously existed, such as odours, noise and vermin.

Model SC500 - Sterilizers

by Matachana Group     based in Barcelona, SPAIN

MATACHANA series SC500 Sterilizers have been designed taking into account the real needs of today’s hospital sterilization, as much in sterilization centrals as in surgical units, outpatient centres, outsourced sterilization services, etc. The SC500 is designed by our R & D centres in Spain and Germany, and manufactured in the production ...

Totally Automated Robotic Waste System

by The Mark-Costello Co.     based in Carson, CALIFORNIA (USA)

Once again, the Mark-Costello Co. sets the industry standard. Allow Mark-Costello's Totally Automated Robotic Waste System be your single source for all your medical waste handling needs.

Syringe disposable

by DelAgua Group     based in Marlborough, UNITED KINGDOM

Syringe disposable eccentric sterile plastic for gases and liquids without needles 10mL x 1.0mL Terumo.

VERTISA Promed - Medical Waste Pre-Shredding System

by VERTISA Medical Waste Technology     based in Orlando, FLORIDA (USA)

Definition of Problem Managing Medical Waste; The toxic waste is a mass of contaminated waste which may contains syringes, needles, paper, plastics, glass, textiles, cultures pathological waste, blood products, sharps, tissues and infectious materials produced by the medical industry in clinics, hospitals, labs and research centers.

AMB Ecosteryl - Model Serial 75 - Hospital Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 100 kg/hr (220 lbs/hr)• Volume capacity : approx. 1200 L• Length: 4.5m• Width : 4.5m• Height : 3m• Weight : 4.5 tons• Required floor space : 5 x 5.5m• Minimum ceiling height : 3.5m• Electric power consumption : 30 kWh• Electric power consumption per ton : 300-400 kWh/t• Shredder/Lifetime on Cutting Blades : 600-700 tons• ...

Model MP 100 - Medical Waste Incinerator

by Addfield Incinerators Environmental Systems Ltd     based in Cannock, UNITED KINGDOM

The MP-100 is specifically designed to dispose of Category 2, 3 and 4 type red bag wastes with high density and high moisture contents. These systems are designed to obtain maximum benefit from Addfield’s hot hearth technology ensuring any energy that is created is utilised to destroy the waste. Highly effective and very fuel-efficient with ...

UMB Medical Waste Sterilizers

by Metan Int`l Trade Co., Ltd.     based in Çankaya-Ankara, TURKEY

UMB Medical Waste Sterilizers are the latest product launched into the market. The pre-shredde kind of equipment has very robust and simple construction and offres various advantages as high sterilization efficacy, easy operation, homogeneous sterlization succes, low operating cost and competitive price and low cost spare parts need. The CE marked ...

Model MP-500 - Hospital Incinerator

by Addfield Incinerators Environmental Systems Ltd     based in Cannock, UNITED KINGDOM

The MP-500 is specifically designed to dispose of Category 2, 3 and 4 type red bag wastes with high density and high moisture contents. These systems are designed to obtain maximum benefit from Addfield’s hot hearth technology ensuring any energy that is created is utilised to destroy the waste. Highly effective and very fuel-efficient with ...

Medical Waste Disposable Equipment

by EMS Makina Sistemleri Co.,Ltd.     based in Ankara, TURKEY

EMS Makina manufacturing Medical Waste Sterilization and Disposable Equipments,which is used in Hospitals. We are operating this system in different municipalites in Turkey. With Medical Wast Carrier Truck,Medical Waste bags also manufacturing. For more information please contact with us. We would be kindly like to assist on your enquiries.

Newster - Model NW5 - Sterilizer for Potentially Infectious Healthcare Waste

by NEWSTER Group     based in Serravalle, SAN MARINO

The Newster NW5 machine was designed for use in small hospitals. It's design allows the system to work for several shifts.  The system can be equipped with a water recycling system, which guarantees maximum effectiveness, safety and work continuity besides a further reduction of running costs. A specially designed system for the ...

RBW - Model 2075 - Red Bag Waste Equipment

by WasteCare Corporation.     based in Gainesville, GEORGIA (US) (USA)

The innovative process uses heat sterilization (with steam & water) and then pulverizes red bag waste awesome return on investmen. Reduces cost of Red Bag Waste processing from around 30 cents per pound (typically) to a total processing cost of around 5 - 6 cents per pound (including processing costs and hauler weight & 'pull' ...

Medical Waste Incineration Systems

by Santes Ltd. Co.     based in Temelli, TURKEY

Medical waste, due to its content of hazardous substances, poses serious threats to environmental health. They composed of all types of wastes generated by health care organizations such as hospitals, clinics, physicians' offices, dental offices, veterinary facilities and other medical laboratories and research facilities. This waste is very ...

STAJEL Liquid Medical Waste Sorbents

by Metan Int`l Trade Co., Ltd.     based in Çankaya-Ankara, TURKEY

The liquid portion of infectious medical waste would contaminate the environment to certain extent during at the points of generation, during the internal and external transports, interim storage and temporary storage, etc. by spillage, leak or accidents. The possible hazard by inhalation and contact might be very high and unpredictable. To ...

BIOGEST AG - Model Puritainer - Mobile Wastewater Treatment Plant

by BIOGEST AG     based in Taunusstein, GERMANY

PURITAINER – is a mobile wastewater treatment plant for the biological treatment of domestic sewage and is manufactured as a norm container including the complete technical equipment for the biological purification of wastewater. Ideal application: camps, settlements, hotels, restaurants, hospitals and sanitariums, barracks, campsites and ...

Promed - Model 200A - Promed Biomedical Waste Shredder

by Vertisa Environmental Technologies     based in Çankaya / Ankara, TURKEY

Promed Biomedical Waste Shredder: Capacity: 20-30 Kg./Hr. Suitable Motor with ISI mark. Power Supply: 440V, Three Phase, 50 Hz AC supply.

48 Gallon Medical Waste Container

by Solutions, Inc.     based in Louisville, KENTUCKY (USA)

Made of high-density polyethylene, these containers are leak-proof, tamper-proof, spill-proof, and reusable. The meet all D.O.T. guidelines for collecting and transporting medical waste. In a hospital or examining room, they are easy to move, odorless, and aesthetically pleasing. Ideal for hospitals, doctors offices, clinics, labs, nursing homes, ...

VERTISA - Medical Waste Post-Shredding

by VERTISA Medical Waste Technology     based in Orlando, FLORIDA (USA)

Medical waste collected in bins or plastic bags are in transferred into stainless steel autoclave carts. The carts are pushed into the autoclave, where a pre-vacuum process ensures that all the air is removed from the wast

AMB Ecosteryl - Model Serial 125 - Medical Waste Treatment Systems

by AMB Ecosteryl     based in Mons, BELGIUM

• Capacity : up to 175 kg/hr (385 lbs/hr)• Volume capacity : approx. 2100 L• Length: 10m• Width : 3.5m• Height : 5.2m• Weight : 10 tons• Required floor space : 6 x 12m• Minimum ceiling height : 6m• Electric power consumption : 60 kWh• Electric power consumption per ton : 345-480 kWh/t• Shredder/Lifetime on Cutting Blades : 1200 tons• Electrical ...

Sharp Containers

by Amcor     based in Hawthorn, AUSTRALIA

Sharpak range of containers for the safe disposal of contaminated sharps.

Need help finding the right suppliers?

Let the XPRTs do the work for you