Metal Recycling Applications available in New Brunswick
-
Premium
Metal separation and recovery for metal recycling industries
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Machineries for product destruction & recovery
Complete Turnkey Systems, custom designed and manufactured by Shred-Tech®, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated products. Shred-Tech®’s Material Separation and Recovery / Destruction Systems are used around the world for recovering precious metals from computers and telecommunications scrap, nylon from carpet, and recyclables from MSW, just to name a few. Mis-packaged consumer products such as breakfast cereals, cosmetics, milk and juice containers, ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Side streams: Mattresses
Mattresses are usually considered a nightmare in the waste management industry. Mattresses cannot be easily compacted in the landfill, and springs are difficult for most shredders. For low-revving and high-torque TANA Shark shredders, however, mattresses are an easy ...
By Tana Oy based in Jyvaskyla, FINLAND.
-
Premium
Disposal Solutions For Scrap Metal Chips
The metal chip waferer produced by Enerpat is suitable for all kinds of metal chips such as iron shavings, iron chips, steel shavings, aluminum chips, alloy chips, and copper cut down by machine tools. ...
By Enerpat Group based in Nantong, CHINA.
-
Premium
Metal Separators for WEEE
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from. Before the E-Waste enter into the shredding process, any contaminating material, like batteries, color cartridges, tonners, etc., must be removed manually from the incoming ...
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
General Industrial Waste Recycling Solution
Enerpat's general industrial waste solutions integrate hardware and software and adopt a modular design. The production line covers a crushing system, magnetic separation system, packing system, RDF granulation system, dust collection system, etc. ...
By Enerpat Group based in Nantong, CHINA.
-
Premium
Recycling equipments for white goods
Granutech Saturn Systems design and manufacture white goods shredders and systems capable of sorting the ferrous fraction from the fluff and can equip these with eddy current and other finder technology to sort aluminum, stainless, and other recoverable ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Recycling equipments for non-ferrous scrap metal shredding & recycling
Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Recycling equipments for ferrous scrap metal shredding & recycling
Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Water treatment chemicals for the steel and coke industry
The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Metal Separators for Glass
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from ...
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
TANA Shark Industrial Waste Shredder for Material Recovery & Re-use- End-of - Cables & Wires
Cables come in multiple forms, sizes, lengths and contents. They may be long, flexible, winding and hard, they may hide valuable metals in them like copper, they may be sticky and soft. In extreme cases, separating valuable metals from the cables without a shredder with high torque like TANA Shark can be almost impossible ...
By Tana Oy based in Jyvaskyla, FINLAND.
-
Premium
Machineries for metals shredding & recycling
Shred-Tech®’s high torque Industrial Shredders can found in many of the world’s largest primary and secondary metal recycling and processing facilities. Shred-Tech®’s applications range from high volume magnesium sprue & runner reduction at over 60 TPH to one of the toughest applications known, the reduction of titanium plate and sheet stock. These slow speed shear shredders reduce shred materials such as baled aluminum, bailed radiators, ACSR cable, industrial, military and consumer ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Recycling equipments for shredding scrap metals
Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Machineries for e-waste shredding & recycling
Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Metal Separators for Metal
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from metal ...
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Advanced resource recovery & purification solutions for hydrometallurgy sector
Eco-Tec Recovery Systems offer a simple, economical approach to purifying acid bleed streams, allowing their recycle and reuse. The separated metals can then be cost effectively reclaimed following acid-purification treatment. For years, electrorefining and electrowinning operations wishing to produce high-purity copper have relied on Eco-Tec’s Systems to continually remove metal impurities from copper and zinc electrolyte bleed streams. The purified acid can then be recycled back to the tank house. This ...
By Kovalus Separation Solutions, Inc. based in Wilmington, MASSACHUSETTS (USA).
-
Premium
Metal separation and recovery for urban waste treatment industry
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Metal separation and recovery for the composting industry
By Regulator-Cetrisa based in Gavà, SPAIN.
-
Premium
Compressed air and industrial gases solutions for steel industry
Energy savings solutions in steel industry. Steel production is one of the most energy consuming industries. Learn how compressed air and gasses like argon and nitrogen weigh on the bills of steel companies and what you can do to reduce the energy consumption. The heat and power needed to produce steel give a burden on CO2 emissions and energy bills of steel companies. That’s why steel mills are looking for ways to reduce their energy usage. The first thing that comes to mind for metal companies like ...
By VPInstruments based in Delft, NETHERLANDS.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you