We couldn't find any metal recycling suppliers or service providers located in Puerto Rico
Here is a list of companies serving Puerto Rico
Metal Recycling Manufacturers, Suppliers & Companies (Waste And Recycling) Serving Puerto Rico
-
REGULATOR–CETRISA started in the 60’s by working in the electric motor market on those specialties where a great precision in the control of speed was required. The management of these motor-variators was at that time already being done through Eddy ...
Regulator Cetrisa - Model R-SIM - Metal Separator for Inductive Detection and Blowing
The Metal Separator by Inductive Detection and Blowing (R-SIM) can separate the metals from the rest of the materials. A metal is detected over the acceleration belt. After processing the information at high speed, a complex pneumatic system ...
CONTACT SUPPLIER -
C&G has been working since 1971 in the sector of industrial wastewater treatment. The Know-How acquired thanks to the design and construction of over 2000 plants sold in Italy and abroad continues to encourage growth and innovation, in order to ...
-
ERGA Makine is a full-cycle manufacturer of high-tech equipment for recycling, mining and mineral processing industries. Our solutions help to separate different types of waste, improve ore grade and quality of concentrates, increase energy ...
Resoline Air Flow - Air Separator
Air separation complex for separation of heavy fraction from MSW (glass, stones, metals, bones, etc.) with efficiency up to ...
CONTACT SUPPLIER -
Since 1963 Aljon has been a worldwide leading manufacturer of landfill compactors, scrap metal and scrap vehicle crushers and balers, and snow removal machinery. Our people are some of the best in the industry, and our product performance is ...
Bonfiglioli - Model Ariete - Portable Scrap Metal Baler
The Ariete Baler is equipped with a 75HP Deutz diesel engine or 55KW electric motor. This portable scrap metal baler is producing 10-12 Tonnes/Hour (11.02-13.23 Tons/Hour) and an average fuel consumption of 6-7 Liters/Hour (1.3-1.5 ...
CONTACT SUPPLIER -
Suzhou JONO Environmental Technology Co., LTD. is a Chinese national high-tech company, which is founded in 2013 and located in Suzhou, China. Since our establishment, we have been devoting to the business of solid waste treatment, becoming the ...
Leo - Plastic/Tire/Metal/Waste/Glass/Drum/Scrap Waste Shredder
Leo primary shredder is a robust and reliable shredder mainly applied in processing MSW, bulky waste and industry waste. By this LEO primary shredder,material is shredded into smaller pieces,which makes the later treatment or transportation easier ...
CONTACT SUPPLIER -
Manufacturerbased in Fohnsdorf, AUSTRIA
ATM stands for Arnold Technology for Metalrecycling - based on more than 80 years of experience and is a leading company of ASCO Group International. Our company engineers, plans, produces and services metal-recycling-systems for the treatment of ...
ATM ArnoCut - Model 400 - Semi-mobile Scrap Shear
The new semi-mobile scrap shear with baling and breaking function has been launched at the IFAT Entsorga 2010. Arnold Technology for Metal Recycling’s (ATM) slogan is the basis for new machine generations like the latest ArnoCut line. In order ...
CONTACT SUPPLIER -
Manufacturerbased in Düsseldorf, GERMANY
Founded in 1913, the German engineering company LINDEMANN designs, develops and produces first class premium machinery, plants and parts for scrap processing: shredders, shears, balers, and original parts. The company has continuously performed ...
Lindemann - Model ZZ - Metal Shredder
Metal shredder with state-of-the-art metal shredding technology for recycling scrap metals up to complete end-of-life vehicles. The biggest and most powerful LINDEMANN shredder. Designed and developed for cost-efficient processing of a wide range of ...
CONTACT SUPPLIER -
Service providerbased in McLean, VIRGINIA (USA)
World Resources Company (WRC) is an environmental risk management company serving the technology sector by providing environmental compliance and innovative and cost effective recycling of non-renewable metal and mineral resources. Environmental ...
-
Manufacturerbased in Yenibosna, TURKEY
DİSAN had started its business life with manufacturing cranes, as the time past we widened our product range by manufacturing balers and other hydraulic machines. Our Product range contains almost every machinery in recycling sector such as; ...
Disan - Semi-Automatic MSW Sorting Plant
In semi-automatic plants waste is seperated in different conveyors depending on their size and shapes by mechanical equipments before manual picking platforms. In this way organics are seperated before manual sorting to improve sorting quality. ...
CONTACT SUPPLIER -
Manufacturerbased in Gosselies, BELGIUM
LEFORT is a family business, founded in 1947, that manufactures and develops all types of hydraulic shears and balers for the metal recycling industry. The name LEFORT is well-known in today’s metal recycling industry and carries the reputation of ...
Lefort - Model 967 - Scrap Metal Balers
The Balers are extraordinarily productive machines that can be equipped with a crane and controlled remotely. With the option of either one or two baling rams these units can produce dense bales at a high ...
CONTACT SUPPLIER -
Service providerbased in Rockaway, NEW JERSEY (USA)
Rockaway Recycling has been a family run scrap yard since 1977. We have been recycling scrap copper, brass, insulated wire, and steel while serving thousands of customers and keeping millions of pounds of material out of landfills. We will help ...
-
Manufacturerbased in Ventspils, LATVIA
We design steel structures for the customer’s tasks, fabricate them, and install them on-site. Metal waste containers are the most commonly used type. This is primarily due to their strength and durability. As a manufacturer of steel refuse and ...
Stim - Steel Refuse and Recycling Containers
As a manufacturer of steel refuse and recycling containers, we are delighted to cooperate with municipal services to directly improve our steel waste containers so that they can help make nature ...
CONTACT SUPPLIER -
Manufacturerbased in Sheffield, UNITED KINGDOM
Orion Metal Trade Ltd (OMT) specializes in trading and processing of various metals. OMT?s objective is to bridge the gap between Sellers and Buyers in the Ferro-Alloys industry as well as direct consumers of such products and services. Our ...
Ferro Vanadium
The production of ferrovanadium, containing 35–80 percent vanadium, is carried out in an electric-arc furnace. Scrap iron is first melted, and a mixture of V2O5, aluminum, and a flux such as calcium fluoride or calcium oxide is ...
CONTACT SUPPLIER -
Technologybased in NORCROSS, GEORGIA (US) (USA)
Sigma Recycling, Inc. is a sourcing, inspection and supply chain Management Company for Recyclable Raw Materials viz. Plastic Resin, Recycled Plastic, Metal, Paper, Rubber and Hay located in Norcross, Georgia, USA. Our wide geographical spread and ...
Sigma - Ferrous & Non-Ferrous Metals
Scrap from various ferrous & non-ferrous metals are amongst the highest recycled commodities in the world. Metals enjoy a high rate of recycling worldwide as they are valuable resources. Also metals like steel & iron have multiple large ...
CONTACT SUPPLIER -
Manufacturerbased in Quanzhou City, CHINA
Different grades of diamond tool & diamond blades are designed and manufactured according to different market demands, ChinShine sales & marketing department Ⅱ is in charge of the marketing & sales business towards Europe, America and other ...
-
Manufacturerbased in Ezhou, CHINA
Hubei Dijie Membrane Technology Co.,Ltd. was established in the year of 2016. The Register Capital is 58million RMB with 20000 square meters factory area and 8000 square meters workshop. Dijie Membrane Tech is proud to be an infrequent enterprise ...
-
Nonprofit organization (NPO)based in Vienna, WEST VIRGINIA (USA)
The National Center for Electronics Recycling (NCER) is a 501(c)(3) non-profit organization formed in 2005 that is dedicated to the development and enhancement of a national infrastructure for the recycling of used electronics in the U.S. through 1) ...
-
Manufacturerbased in Welland, ONTARIO (CANADA)
Ward Industrial Equipment manufactures custom high quality bulk material handling equipment. Ward Industrial Equipment is part of Empire Industries Ltd, a world leader in engineered steel products. Empire builds and erects the most demanding steel ...
-
Manufacturerbased in Maple Heights, OHIO (USA)
Ohio Magnetics and Stearns Magnetics are world leaders in the development of lifting magnet systems and magnetic separation equipment for the steel, scrap processing, recycling, mining and rail industries. Established in 1917, Ohio Magnetics, Inc. ...
-
Manufacturerbased in Dallas, TEXAS (USA)
Triple/S Dynamics is a leading manufacturer of conveying, screening and separating equipment for the process industries. We have provided vibrating equipment to processors for over a century and that experience crosses a diverse list of industries ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you