Non-ferrous Metal Recycling Articles

  • Aurubis, Lünen, Germany - Case Study

    In 2008, Aurubis AG, headquarters in Hamburg, Germany, became the first company to implement TOMRA Sorting’s comprehensive electronic scrap process – a recycling solution which has since been deployed in a variety of custom formats by a number of other recycling plants. ...


    By TOMRA Sorting GmbH.

  • The Magic of Recycling

    “Magic, by its ability to capture the imagination, can change the world” – Cyril the Sorcerer. My presumptions about what makes for good recycling outreach were shattered in the wink of an eye on the day a magician restored a torn-up newspaper into a fully-recycled newspaper. From this point on buttons, posters, marketing, and even social media ...

  • Land recycling in Europe

    Land take, or the change from non-artificial to artificial land cover, reflects on-going and often conflicting claims on land. Some of the land that is 'taken' for urban development is covered with an impervious surface, which severely hampers ecosystem functioning and the related delivery of ecosystem services. However, when land is 'recycled', land that was developed in the past and has ...

  • ENERPAT Hot Model 200 Tons Automatic Metal Baler

    ENERPAT Hot Model 200 Tons Automatic Metal Baler ...


    By Enerpat Group UK Ltd

  • 6-yard dumpster was replaced by only one X10 baler and the volume of non-recyclable materials was reduced - Case Study

    Chicago Coding Systems is specialized in the supply of products and services needed by the printing, labeling and coding companies. When CCS installed a small vertical X10 baler, they cut their waste handling costs to the half. Chicago Coding Systems (CCS) - with premises in St. Charles, Illinois - provides many different solutions for printing, labeling and coding companies. CCS has more than ...


    By Bramidan Balers

  • Can trading pollution like stocks help fight climate change?

    The gas produced by hog manure at farms across the U.S. punches holes in the ozone layer, overheats the planet, and angers neighbors with its peculiar odor, a mix of rotten egg and ammonia. All that's needed to clear the air is to cover the manure with a system of tarps that captures the gas, but many farms don't do it because it's too expensive. "If you don't give people incentives to come up ...


    By Associated Press

  • Water Recycling at Melbourne Sporting Precinct - past, present and future projects

    This case study presents the planning, design and operation of  water recycling facilities at the Melbourne Tennis center and Melbourne Cricket Ground. Melbourne and Olympic Parks precinct is Australia's premier sports and entertainment provider; home to hundreds sporting, cultural and entertainment events, most notably The Australian Open Tennis Grand Slam. As part of the overall masterplan ...


    By IVWater

  • Recycling Using Antifreeze with Electrodionization

    Recycling used antifreeze makes sense for two reasons: 1) It is cost-effective, and 2) It saves resources. Ethylene glycol, the primary active ingredient in antifreeze, is produced from natural gas, which is a finite, non-renewable resource. For businesses that use a lot of antifreeze, like automobile repair shops, setting up an antifreeze recycling program can significantly reduce management ...


  • Lowmac Alloys Recycling Services - Case Study

    Alloys offer a broad range of recycling services, to companies all over the west of Scotland, from their two main bases at Irvine and Ayr. The company needed a two-phase upgrade of their existing facility to handle an increasing and diverse workload, which included metal recovery, fines extraction, wood, hardcore, hard plastics, ferrous and non-ferrous materials among others. This demanded a ...

  • Lowmac Alloys upgrades Recycling Services - Case Study

    Lowmac Alloys offer a broad range of recycling services, to companies all over the west of Scotland, from their two main bases at Irvine and Ayr. The company needed a two-phase upgrade of their existing facility to handle an increasing and diverse workload, which included metal recovery, fines extraction, wood, hardcore, hard plastics, ferrous and non-ferrous materials among others. This ...

  • Urban sanitation: Entrepreneurships among the urban poor for waste recycling in Patancheru, AP, India

    Urban sanitation is a growing problem in cities that are growing fast. This is reflected in the Greater Hyderabad Municipal Corporation (GHMC) area where an annual urbanization rate of 4.7% has been reported.The waste generation is estimated at 2.3 mt per day. Biodegradables (52%) are mixed with non-degradables, and decomposing piles of waste is a common site. This has resulted in odour problems ...


    By IWA Publishing

  • Placing recycle bins in public places to be noticed

    It is often the case that even though a large commercial space has taken green initiatives by placing appropriate containers for recyclable and non-recyclable waste, people tend to overlook those and just throw the rubbish in the handiest bin. This is a persistent problem in hotels, shopping malls, restaurants, offices, and even on the streets and parks. The reasons for this are that the majority ...

  • Comparing Evaporative technologies for the Recycling of produced Water

    Both multi-stage and MVR evaporators are capable of producing distilled quality water from produced water.  Distilled water quality ranges from 100 to 500 ppm TDS depending upon the initial TDS of the produced water and the level of concentration of bottoms (waste) obtained. Typical systems are capable of attaining final concentrations ranging from 270,000 ppm to 350,000 ppm TDS.  The ...


  • Recycling.com. a Case Study

    Recycling.com is an online global trading network for recyclable materials. The website is unique because it allows an auction to take place directly between the seller of the recyclable material and those wanting to buy it, in a secure trustworthy environment. Recycling.com was co-founded in 2012 by Mark Baij, an experienced recyclinginvestment executive, and Noel Hanrahan, an investment ...

  • Small Oil Filter Recycling Line

    Oil Filter Recycling Oil filters recycling line construction is more and more worthwhile as the regulations regarding the containment of scrap motor vehicles increasingly. Also plus the increasing global demand for nonferrous metals and a steady price increase. Small Oil Filter Recycling Line Oil filter recycling line’ s basic ...


    By Harden Industries Ltd.

  • Increased Support for Drinking Recycled Water

    As the discussion of recycled water in the media has increased — a significant change has occurred in people's opinions on drinking recycled water. There has been a convincing increase in support for drinking recycled water.The greater willingness for people to drink ...


    By IWA Publishing

  • Case study: OCC recovery

    Challenge A waste recycling facility was looking to recover mainly OCC (Old Corrugated Cardboard) from his waste stream. They saw the value in recovering this product, but were presently manually sorting the material off of the floor on a daily basis. Even with floor sorting, the customer was able to recover in the neighborhood of 10-12 bales per day. Approach ...


    By General Kinematics

  • Non-recyclable but not ready for a landfill

    They say recycling is dead. In the current model with the economy as it is, I’d be inclined to agree. But it doesn’t have to be that way. When we as companies start focusing on how we can collaboratively increase our efficiency, decrease our workloads and create smarter customers, we all win. That’s what an upcycling-focused products company does—choosing a different route ...


    By Waste Advantage Magazine

  • Master Magnets introduce the `R` type

    Eddy Current Separators are one of the most widely used types of magnetic separation equipment in the world today and are being increasingly used in various industrial applications for the separation of non-ferrous metals, such as aluminium and copper, from various types of product. Applications that often call for Eddy Current Separators include the separation of aluminium from crushed glass, ...


    By Master Magnets Ltd

  • Harris and its machines stand the test of time

    US-based Harris has a broad remit: the design, manufacture and support of processing equipment aimed at a broad spectrum of users, including handlers of ferrous/non-ferrous metals, recovered paper and plastics scrap. It’s a formula that has generated more than 6000 recycling machinery sales across over 40 ...


    By Recycling International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you