Oil And Gas Waste Equipment For Waste And Recycling Available In California
-
Manufactured by Yingdu Demister Pads Co.based in CHINA
Wire Mesh Demister Pads are used to filter and separate liquids and solids. They are made from knitted mesh fabric and have a wide variety of applications in the oil and gas industry, chemical industry, food processing industry and more. The knitted mesh structure and structure of the Demister Pad allows the it to have a high efficiency, low resistance and very good filtration performance. The ...
-
Manufactured by Deeter Electronics Ltdbased in UNITED KINGDOM
The LVCSi is an analogue vertical level sensor with an integrated display meter and output driver specifically designed for continuous, in-situ monitoring of your tank. It is an extension of Deeter Electronics’ range of LVCS analogue level sensors and includes a temperature sensing ...
-
Manufactured by Grosvenor Pumps Ltd.based in UNITED KINGDOM
The L-Type is a double acting simplex pump with drive through worm gears by electric motor. Standard pumps are manufactured with 3″ stroke and bore sizes from 2.1/4″ to 3.1/2″. By suitable combination of bores, outputs to suit a wide range of requirements from 2,910 to 11,365 L/Hr can be supplied at pressures up to 26 Bar depending on type and size. A pulsation ...
-
Manufactured by Fingo-Complexbased in RUSSIA
Our technologies are suitable for power generation and industrial applications, including aluminum, iron and steel, oil and gas, cement, waste-to-energy, biomass, pulp and paper, and nonferrous metals, among ...
-
Manufactured by Moyno, Inc.based in USA
Traditional close coupled pump specifically designed for applications that require the transfer of highly viscous fluids and solids where a close coupled configuration is preferred, but the robustness of a gear joint is ...
-
Manufactured by Valtorc Internationalbased in USA
The direct mount brass ball valve series is available in sizes 1/4' up to 4' (inch) in size. With a working pressure up to 400PSI (150PSI steam), TFE seats and Viton O-rings and full ISO 5211 mounting pad - this is an ideal brass ball valve for ...
-
Manufactured by Grosvenor Pumps Ltd.based in UNITED KINGDOM
The Pygme Variflow is a variable output single acting plunger pump with high efficiency double ball valves. Driven by a Worm and Wheel gear-set actuating a push-rod, this trouble free mechanism operates a simple Sprung Return Pump End ...
-
Manufactured by Brofind Spabased in ITALY
Direct thermal oxidizers can be considered as normal combustion chambers where the gas stream, pollutant laden, is burned directly without any heat ...
-
Manufactured by Lemna Environmental Technologies, Inc. (LET)based in USA
Technically superior design with interlocking edges with a cross-buttress design, LET’s segmented technology deliver cover solutions that are eco-friendly and cost-effective. LET Segmented Floating Cover Systems are comprised of durable discs that are engineered for floating stability. This innovative cover system incorporates specially engineered hexagonal discs with interlocking edges ...
-
Manufactured by Moyno, Inc.based in USA
The 2000WA close coupled pump is specifically designed for lower pressure, lower flow applications that do not require the full features and benefits of the 2000G1 pump. The 2000WA features a close coupled design that has integral bearings that support the radial thrust loads that can be seen at the rotor/stator. This design reduces the overall stress that can occur in the gear ...
-
Manufactured by Wenzhou Jiahao Petroleum Machinery Co, Ltdbased in CHINA
VYB-110 explosion-proof oil and gas recovery pump (hereinafter referred to as oil and gas recovery pump) is based on the national standard GB3836.1-2010 "Explosive Environment Part 1: General Requirements for Equipment" and GB3836.2-2010 "Explosive Environment Part II: Separated Explosion-proof enclosure "d" protection equipment", enterprise standard Q/ZMD10-2013 "Explosion-proof Vapor Recovery ...
-
Manufactured by Henan Doing Environmental Protection Technology Co., Ltdbased in CHINA
The plastic pyrolyzer is a process that uses pyrolysis to pyrolyze waste plastic into fuel, carbon black and steel wire. DoingGroup's waste plastic pyrolysis equipment mainly includes reactor, oil and gas separator, vertical/horizontal condenser, and ...
-
Manufactured by KD International B.V.based in NETHERLANDS
Oil and Gas waste water includes small amounts of free or dissolved hydrocarbons and solids that must be removed before the water can be re-used, injected or discharged. The level of removal (particularly for hydrocarbons) and disposal options are typically specified by the client. Treatment to remove dispersed hydrocarbons in the form of oil droplets from water relies on gravity separation, with ...
-
Manufactured by L.B.S. Lubrication Units Inc.based in CANADA
You need more than a standard oil and filter to extend engine life and time between oil changes. Particularly with the post 2009 engines having greater emission standards and while operating at higher temperatures, with much higher rates of contaminations. Standard oil filters are ‘full-flow’, meaning they filter ‘all’ the oil that enters the fine tolerances of the engine ...
-
Manufactured by L.B.S. Lubrication Units Inc.based in CANADA
The HP-Series is designed to handle pressures up to 4,569 PSI/315 Bar, typically found in applications such as hydraulics and transmissions. You need more than a good quality oil and standard filter to extend component life and time between oil changes. External contamination arises from many sources including contaminated ‘new unused oil’, airborne particles (dust) and moisture laden ...
-
Manufactured by Michaelis GmbH & Co. KG.based in GERMANY
The future-proof furnace type must be able to accept a wide variety of fuels. In addition, decentralised systems will increasingly be the first choice. Michaelis has developed and patented a moved bed system to meet these ...
-
Manufactured by Indeck Power Equipment Companybased in USA
Indeck’s trailer mounted boilers deliver reliable, portable steam and hot water quickly to your facility. Trailer-mounted boilers make steam delivery fast and easy. With road-ready equipment, the loading and unloading process is bypassed–saving you time and money. Start-up and installation becomes quick and quick and convenient with easy-access connection points and user-intuitive ...
-
Manufactured by Grosvenor Pumps Ltd.based in UNITED KINGDOM
This single acting Plunger Pump has efficient Ball Valves and a Splash Lubricated, Electrically driven gearbox. The gearbox is available in 2 speeds with a range of Pump Head sizes to suit your requirements. With pressures up to 70 bar as standard and flow rates of up to 318 L/hr, it is suitable for a wide range of Industrial applications. ...
-
Manufactured by Grosvenor Pumps Ltd.based in UNITED KINGDOM
Using the same Variflow mechanism as found in the Pygme Plunger pump and married to our diaphragm heads, this pump gives an output adjustment of 0-100%. ...
-
Manufactured by Shanghai Wal-Joean International Trade Co., Ltd.based in CHINA
These following products are virgin activated carbons which are in granular or power form and made from selected bituminous coal. They are ideal for exhaust gases high efficiency desulphurization and denitrification of exhaust gases from power plant and non-ferrous metal metallurgy as well as from burning oil, natural gas, coal and waste ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you