Only show results in Connecticut? Ok

Oil Recovery Applications

  • Premium

    Metal Sludge Plants for Oil and Metal Industry

    Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for site remediation

    The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Mineral fuel & lube oil

    Pieralisi offers technological solutions for fuels cleaning and treatment, for lube oils purification, for the conditioning and recovery of mineral oils, industrial or environmental slop oils, bottom tank residues and bilge water. Furthermore, our easy and efficient solutions are aimed to reduce the operating costs and protect the environment.

    By Pieralisi Group based in Jesi, ITALY.

  • Premium

    Liquid/solid separation equipment for oil sands

    Oil sands or, more technically, bituminous sands, are a type of unconventional petroleum deposit. Oil sands represent a vast wealth of energy reserves for the world rivaling traditional sources in quality, availability and the ability to meet the world`s needs for many years into the future. The technologies for extraction of this resource are increasingly efficient, and WesTech has worked with several companies on the leading edge of these efforts and is a ready partner for new projects and plant upgrades.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Emission control solutions for oil & gas industry

    In Fluid Catalytic Cracking (FCC)processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn`t represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Gas analyzers for measuring acrylonitrile analysis in water

    Monitoring of liquid matrices by Gas Chromatography using a simplified and enhanced headspace sampling system Chromatotec® presents a headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer. Speciation of sulfur compounds or VOCs is done with a MEDOR®...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Ultraviolet disinfection systems for the well injection water & SRB reduction

    Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes,...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Data loggers and data acquisition monitoring solutions for the oil & gas sector

    Selection of oil gas data loggers for monitoring & recording data in the field. Robust, programmable, universal-input, multi-channel, remote models with up 48 inputs for any measurement requirement. Oil and gas industrial data loggers for applications including oil and natural gas recovery and processing, monitoring temperature and pressure of steam and other factors in oil wells, biogas generation and conversion, water pressure, pumping efficiency, and more.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the mining oil & gas industries

    Applications in the oil and natural gas industry include recovery and processing, monitoring temperature and pressure of steam and other factors in oil wells, water pressure, pumping efficiency, and more. CAS DataLoggers provides dataTaker loggers with universal input channels for a wide range of input signal types.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Water treatment solutions for the oil & gas industry

    Production of oil and gas is usually accompanied by the usage and production of large volumes of water in several applications. The industry recognizes its dependency on water and is focused on minimizing its use, enhancing reuse and recycling opportunities, and improving treatment technologies and disposal options. Lenntech provides sustainable complete solutions for water and waste water treatment in oil and gas industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Process equipment and technology solutions for plasticindustry - polymers industry

    GIG Karasek stands for technology and plant engineering for the production, processing and recycling of polymers. We are able to offer tailor-made solutions for you. Do you have new applications, then contact us. We can also test your product in our technical center.

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Premium

    Belt presses for fruit juice & beverage

    Beverage Production: High Quality And Improved Profitability. Mechanical separation technology in the manufacture of beverages optimises yield while guaranteeing consistent quality.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Shredding solutions for SRF (specified recovered fuel) sector

    The SRF (Solid Recovered Fuel / Specified Recovered Fuel) is a fuel produced by shredding and dehydrating MSW (plastic, paper, textile fibers, etc.), of non-hazardous waste (both urban and special) through appropriate treatments from other non-combustible materials, such as glass, metals and inert.

    By SatrindTech Srl based in Arluno, ITALY.

  • Water treatment research for oil and gas industry

    The upstream oil and gas industry is increasingly becoming a water management industry. Globally, three barrels of water is extracted for every one barrel of oil produced. With effective management, this produced water can become a source of value, as disposal options become limited and environmental regulations tighten. New water treatment technologies will allow this water to be reused in waterflooding, enhanced oil recovery and hydraulic fracturing operations, in a market worth $5.2 billion in 2014. Managing...

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Wastewater pretreatment solutions for industrial machinery/tools and equipment

    Grinding and Milling Machinery. Machinery coolant and Tramp Oil recovery. Process Water.

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).

  • Beach & Shoreline

    For oil spill response in beach and shoreline environments DESMI offers a whole host of equipment to handle any eventuality. The smaller sizes of Ro-Boom and Ro-Beach are unequalled in application and robustness while the range of lightweight Troilbooms can meet the lower cost expectations. In addition the famous Termite and Mini-Max weir skimmers are proven performers in recovery. Recovery systems are also available in vacuum designs from the well-known Ro-Vac to the highly portable Ro-Vac Mini – the latter...

    By DESMI A/S based in Noerresundby, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you