Oil Recovery Applications in Europe
-
Premium
Water treatment solutions for the oil & gas industry
Production of oil and gas is usually accompanied by the usage and production of large volumes of water in several applications. The industry recognizes its dependency on water and is focused on minimizing its use, enhancing reuse and recycling opportunities, and improving treatment technologies and disposal options. Lenntech provides sustainable complete solutions for water and waste water treatment in oil and gas industry considering a wide range of technologies and ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Gas analyzers for measuring acrylonitrile analysis in water
Monitoring of liquid matrices by Gas Chromatography using a simplified and enhanced headspace sampling system Chromatotec® presents a headspace sampling system designed to extract representative samples from the liquid phase. The vaporized sample can be preconcentrated using a trap to achieve quantification at very low concentration levels (ppb and/or ppm). Then, it is injected automatically and in continuous mode into the auto-GC analyzer. Speciation of sulfur compounds or VOCs is done with a MEDOR® ...
By Chromatotec Group Distributor in Essex, UNITED KINGDOM.
-
Oily Waste Plants for Oil and Gas Industry
Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Chemical solutions for oil & gas industry
HIMOLOC Technology offers service companies, operators and refiners multiple opportunities to improve their production and ...
By Derypol, S.A. based in Barcelona, SPAIN.
-
Ultraviolet disinfection systems for the well injection water & SRB reduction
Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes, ...
By atg UV Systems - a brand by EVOQUA Water Technologies LLC based in Wigan, UNITED KINGDOM.
-
Industrial wastewater solutions for general manufacturing sector
General Manufacturing and Industrial processes involve chemical, physical, and mechanical steps to manufacture the goods used by society. With that activity comes numerous solid and fluid waste streams that plant operators must account for and manage for either treatment and disposal or reuse. Management of an industrial waste water treatment system by screening out solids as well as managing solids with an industrial waste grinder are all critical operations to an efficient industrial ...
By JWC Environmental Office in Congleton, UNITED KINGDOM.
-
Metal Sludge Plants for Oil and Metal Industry
Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices. ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Oil spill recovery
As the exploration for oil and gas enters areas of greater environmental vulnerability, the need for proven, reliable and robust equipment is doubly important. DESMI continues to answer this challenge with existing as well as specially developed oil spill recovery systems to operate in the most difficult and harsh environments known to man. This equipment is known as the ARCTIC range. This is a special tool kit of systems to enable you to successfully contain, recover and store hydrocarbons in the Arctic ...
By DESMI A/S based in Noerresundby, DENMARK.
-
Process equipment and technology solutions for plasticindustry - polymers industry
GIG Karasek stands for technology and plant engineering for the production, processing and recycling of polymers. We are able to offer tailor-made solutions for you. Do you have new applications, then contact us. We can also test your product in our technical ...
By GIG Karasek GmbH Distributor in , UNITED KINGDOM.
-
Shredding solutions for SRF (specified recovered fuel) sector
The SRF (Solid Recovered Fuel / Specified Recovered Fuel) is a fuel produced by shredding and dehydrating MSW (plastic, paper, textile fibers, etc.), of non-hazardous waste (both urban and special) through appropriate treatments from other non-combustible materials, such as glass, metals and ...
By SatrindTech Srl based in Arluno, ITALY.
-
Mercury Waste Plants for Oil & Gas Industry
Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Beach & Shoreline
For oil spill response in beach and shoreline environments DESMI offers a whole host of equipment to handle any eventuality. The smaller sizes of Ro-Boom and Ro-Beach are unequalled in application and robustness while the range of lightweight Troilbooms can meet the lower cost expectations. In addition the famous Termite and Mini-Max weir skimmers are proven performers in recovery. Recovery systems are also available in vacuum designs from the well-known Ro-Vac to the highly portable Ro-Vac Mini – the latter ...
By DESMI A/S based in Noerresundby, DENMARK.
-
Fluid temperature control and separation solutions for offshore applications
Delivery assured from start to finish. No matter if you are undertaking an HP/HT drilling campaign, decommissioning an asset, or maintaining control of waste fluids, offshore demands the highest standard of equipment and service for safe and efficient operations. Whether it be long- or short-term equipment rental or capital expenditure, our flexible and tailored approach means we will design an offering that ultimately best suites your needs. Our extensive fleet of decanter centrifuges, disc stack separators, ...
By Osso Ltd based in Aberdeen, UNITED KINGDOM.
-
Oil Mist Seperator for Building Construction
Contec oil mist separators ensures the façade design of ETFE cushions for efficient and environmentally friendly glare-, heat- and UV-protection. Contec GmbH, Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. The use of the Contec oil mist separator (COMS) in the field of building construction is definitely very innovative and our system has proven again its advantages in environmental ...
By Contec GmbH based in Bad Honnef, GERMANY.
-
Drill Cuttings Plants For Oil and Gas Industry
Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Shredding solutions for automotive oil filters industry
The oil filters mounted on cars, trucks and tractors, if shredded and properly processed, can return the 97% of the materials. The components which can be recovered are oil, paper, plastics, ferrous materials and ...
By SatrindTech Srl based in Arluno, ITALY.
-
Hazardous waste treatment solutions for site remediation
The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Water treatment research for oil and gas industry
The upstream oil and gas industry is increasingly becoming a water management industry. Globally, three barrels of water is extracted for every one barrel of oil produced. With effective management, this produced water can become a source of value, as disposal options become limited and environmental regulations tighten. New water treatment technologies will allow this water to be reused in waterflooding, enhanced oil recovery and hydraulic fracturing operations, in a market worth $5.2 billion in 2014. Managing ...
By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.
-
Centrifugation and Separation Technologies for Soil Treatment (Flushing)
This water jet cleaning technology for soil cleaning is applicable for removing any contaminants necessarily demanding vibration treatment and high pressure water flushing. ...
By WSEnergy based in Munich, GERMANY.
-
Membrane Distillation Unit for Oil & Gas and CTX
Zero liquid discharge (ZLD) in Oil & Gas and Coal-to-chemical (CTX) industries. To reuse every drop of freshwater from high TDS/COD waste ...
By Memsys Water Technologies GmbH based in Schwabmünchen, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you