Oil Sludge Applications available in Connecticut
-
Premium
Incinerator solutions for the marine waste sector
Storage of waste while at sea can take up valuable space. Using one of our on-board marine incinerators you can free up this space for more profitable activities or to simply provide more ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Centrifuges for industrial waste water, minerals and oil industry
Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing oil ...
By Flottweg SE based in Vilsbiburg, GERMANY.
-
Premium
Oil Spill Eater II (OSE) for energy storage and fuel storage leaks
The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since ...
By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).
-
Premium
Hot Sludge Flow Measurement solutions for Wastewater Treatment Plant - Sludge Treatment
Continuous measurement of sludge coming from a digestion tower and being pumped through a heat exchanger. Required to detect possible blockage or reduced pump performance and to ensure permanent heat supply for the WWTP social ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Oil Spill Bioremediation
The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since ...
By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).
-
Cleaners for Oil & gas industry
IPC’s cleaners are used throughout the oil and gas industry for cleaning equipment and filter membranes. They are excellent alternatives to hazardous, solvent based degreasers. Our cleaners remove oils and greases, sludge, mud, cutting fluids, flux, and petroleum residues. Clean equipment helps to ensure that operations run smoothly and ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Fluid temperature control and separation solutions for onshore applications
Delivery assured from start to finish. From onshore drilling to refineries, we support clients with their fluid management challenges from mud temperature controls systems to fluid separation, cooking oils to crude oils. By evaluating, planning and implementing solutions designed at every stage to enhance drilling fluid performance and improve operating efficiencies, we have been successfully supporting clients globally for more than 18 years. Our experience goes beyond drilling, having carried out slop oil, ...
By Osso Ltd based in Aberdeen, UNITED KINGDOM.
-
Odor control for refining/petroleum
You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including ...
By OMI Industries (OMI) based in Palatine, ILLINOIS (USA).
-
Evaporating and drying equipments for electroplating sludge applications
Electroplating sludge mainly comes from the solid waste generated by various electroplating waste liquids and electrolytic bath liquids of industrial electroplating plants after liquid phase chemical treatment. Due to the different production processes and treatment processes of electroplating manufacturers, the chemical composition of electroplating sludge is quite complex, mainly containing chromium, iron, nickel, copper, zinc and other heavy metal compounds and soluble ...
By Guangzhou Shincci Energy Equipment Co., Ltd. based in Guangzhou, CHINA.
-
Citadel Biocat+ for Bioremediation
Citadel Biocat+ brings dramatic results and simplicity to the bioremediation of complex hydrocarbons providing a solution to some of the world's most polluted ...
By Citadel Environmental Solutions (CES) based in Grittleton, Chippenham, UNITED KINGDOM.
-
Spills, Scum & Sludge
Floating scum & sludge is a by-product of wastewater treatment processes. Scum and sludge significantly impact the aeration process, filtration process, and consumption of consumables. To achieve high wastewater treatment efficiency scum and sludge treatment and disposal is essential. Whereas, to mitigate the damage of oil spills, a quick response is ...
By Potential Engineering based in Navi Mumbai, INDIA.
-
Wastewater treatment solution for the industrial industries
Schwing Bioset, Inc.'s technical expertise and innovative approach to the design of Fluidized Bed dryers, coolers, and conditioners has resulted in Schwing Bioset fast becoming a preferred partner of companies processing municipal solids and companies processing coal. The versatility of Schwing Bioset's piston pumps allow them to be used in many industries to pump a wide range of materials such as oil sludges, dredging spoils, food wastes, and coal slurries. In fact, Schwing Bioset pumps are so versatile they can ...
By Schwing Bioset, Inc. based in Somerset, WISCONSIN (USA).
-
Oily Waste Plants for Oil and Gas Industry
Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
Industrial filtration solutions for waste water / sewage sector
Waste water treatment and water purification for potable water dewatering and decontamination of industrial and municipal waste water: sewage from dust scrubbers, paper, leather and latex waste water, grinds of wood and stone, coal and ore suspensions from flotation processes neutralization plants, oil refineries metal hydroxide sludges (galvanic) drilling mud of oil ...
By JVK Filtration Systems GmbH based in Georgensgmünd, GERMANY.
-
Sludge Dewatering for Refineries
By Canamidex International Corp. based in Richmond Hill, ONTARIO (CANADA).
-
Fluid temperature control and separation solutions for oil and gas applications
As the oil and gas sector moves towards a more sustainable, environmentally improved operating model a key success factor rests within supply chain, who you choose to partner with will determine how successful the move ...
By Osso Ltd based in Aberdeen, UNITED KINGDOM.
-
Metal Sludge Plants for Oil and Metal Industry
Grinding-swarf from the metal processing industry may contain metal alloys, stainless-steel and high-alloyed steel, all of which are ideal input-materials VacuDry unit. The absence of oxygen in the VacuDry process prevents any changes in the chemical structure of the oil, emulsions or metals during the treatment. The output material can later be sold at high prices. ...
By econ industries services GmbH based in Starnberg, GERMANY.
-
KREBS® CP Cyclone Vessels & DeSanders for Automotive - Paint & Cleaning Processes
KREBS cyclones are used in automotive and large vehicle plants. Krebs cyclones improve the cleaning process prior to painting by separating the paint weld balls, metallic particles, oils, grease and phosphate sludge from the cleaning ...
By FLSmidth based in Tucson, ARIZONA (USA).
-
Centrifugation and Separation Technologies for Oil Sludge and Drilling Mud Treatment
Annual volume of oil pollution and oily wastes in the world is estimated as much as hundreds million cubic meters. As a rule, oily wastes that enter the water and soil come from following sources: oil exploitation and transportation, petroleum production at oil refinery plants and cleaning operations of oil ...
By WSEnergy based in Munich, GERMANY.
-
Viscosity Technology for Recycling
Since long, LIST KneaderReactors are in successful operation in many industrial recycling processes where valuable products are recovered and the actual wastes are treated such that they are ready for disposal or incineration. Most of these thermal processes have in common, that during the treatment, the product undergoes various states from liquid via pasty to dry. The unique ability of the robust LIST KneaderReactors to handle the various product states and phase changes in one single batch or continuous ...
By LIST Technology AG based in Arisdorf, SWITZERLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you