Paper Recycling Articles

  • Lynn L. Bergeson Quoted In Bloomberg BNA Daily Environment Report Article “Paper Waste Spurs Testing of Low-Cost Carbon Fiber for Products”

    On August 28, 2017, Lynn L. Bergeson, Managing Partner of Bergeson & Campbell, P.C. (B&C®), was quoted by the Bloomberg BNA Daily Environment Reportdiscussing Toxic Substance Control Act (TSCA) regulatory concerns for carbon fiber with a lignin. Since the lignin-PAN carbon fiber under development does not yet involve the use of carbon nanofibers, ...


    By Bergeson & Campbell, P.C.

  • Paper Recycling - Case Study

    The problem: The UK is the largest producer of wallpaper worldwide. The British wallpaper industry is situated around Darwen, Blackburn. Many of the wallpaper mills are operated in crowded old factory buildings. Once a leading wallpaper manufacturer Crown Wallpaper (also known as the Crown Wallpaper Company) was an agglomeration of wallpaper manufacturers in the United Kingdom since ...


    By Dirk European Holdings LTD

  • How To Get Affordable Fourdrinier Paper Machines Online?

    When you begin to find different companies that sell fourdrinier paper machines, you can find a number of these available. These are typically wide application papermaking machines. These are typically very different than your typical cylinder mould paper machine, primarily because it is a lot faster. ...


    By Beston Machinery

  • Reliability and prepress technology deciding factors when Stena Recycling chose Presona

    Stena Recycling in Kristianstad, Sweden, is featuring a new Presona LP 100 DH4S baler, increasing its baling capacity and ensuring production with a minimum of stoppages. Stena Recycling’s Kristianstad facility is one of the company’s 165 recycling plants in Sweden, Norway, Denmark, Finland and Poland and manages a wide variety of materials from municipal and business ...


    By Presona AB

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...


    By UNTHA Shredding Technology

  • A hundred-year perspective on sustainability​

    “I’m proud to have the privilege of working for a company whose environmental efforts are characterised by both a long-term approach and a sense of responsibility,” comments Anna Mårtensson, Environmental Manager at Iggesund Paperboard’s Swedish production facility, Iggesund Mill. “Today our environmental impact is almost non-existent compared with the ...


    By Iggesund Forest AB

  • PeCOD® Pulp and Paper Applications - Case Study

    The pulp and paper industry utilizes wood as raw material to produce pulp, paper, card board, and other cellulose based products. Pulp and paper mills produce large volumes of wastewater and residual sludge which presents a number of challenges with regards to treatment and discharge. Contaminants in pulp and paper waste streams often include effluent solids, sediments, absorbable organic halides ...


    By MANTECH

  • Document shredding as an economic mainstay for workshops for the disabled - Case Study

    Secure document shredding Document shredding is an important economic mainstay for the workshops for disabled persons at Lammetal Werkstätten GmbH. Now the company can continue to expand this service area with a “social commitment” thanks to two high performance shredders from HSM in Frickingen at Lake Constance / Germany. The Lammetal workshops could be ...


    By HSM GmbH + Co. KG

  • Defining the balance in Recycling report

    Our report examines industry sectors to show how businesses can focus on generating quality recycling by following the principles of the waste hierarchy. In the current climate there’s a huge global market for materials of the right quality and this provides a real opportunity for those businesses that produce consistently high quality material for recycling. Growth in global recovered ...


    By DS Smith Recycling

  • A landscape lake flow pattern design approach based on automated CFD simulation and parallel multiple objective optimization

    A design approach for determining the optimal flow pattern in a landscape lake is proposed based on FLUENT simulation, multiple objective optimization, and parallel computing. This paper formulates the design into a multi-objective optimization problem, with lake circulation effects and operation cost as two objectives, and solves the optimization problem with non-dominated sorting genetic ...


    By IWA Publishing

  • Cosmeva acquired 7 balers X30 AD with full automatic doors - Case Study

    In order to strengthen its policy for waste recovery, valuation and flow optimization, the manufacturer of cosmetic products Cosmeva invested in 7 Bramidan balers. Centralized compaction outside was too expensive Until recently, Cosmeva relied on a complex internal organization for handling its cardboard and plastic waste. Every single production unit was generating a ...


    By Bramidan Balers

  • World famous watch manufacturer chooses Bramidan as time matters - Case Study

    Swiss leader watch designer and manufacturer TISSOT has taken advantage of the new expansion of its premises to invest in a fully automatic Bramidan channel baler to optimize waste handling procedures. For many years, Tissot had been using a 20m3 waste compactor to handle all types of waste fragments. Once full, the compactor used to be sent to an incinerator located 10 km away from the factory. ...


    By Bramidan Balers

  • Pioneering a smart and sustainable waste collection system for Dubai

    Intercare Group of companies holds exclusive viewing of its innovative 'Arabian Palm' - a unique prototype that combines various intelligent functions to offer the residents of Dubai a 'smart' solution in waste management. Intercare Group introduced the Arabian Palm to Dubai Municipality officials at an exclusive event held at Radisson Blu Hotel, Dubai Deira Creek. The prototype is an offering ...


    By HABA Products - Elo Group Oy

  • The secure destruction of the hard disk: from today, with SatrindTech it`s even easier

    Every time that we install programs or apps for our smartphones, when we use internet services or we sign modules, we consent to the treatment of our personal data, which is generally digitized on electronic supports (generally hard disks). Correct management of our privacy requires total protection of the data contained, even during the destruction phase, of these supports. International laws ...


    By SatrindTech Srl

  • (Let) electronic data media be shredded - Case Study

    When disposing of digital data media, it is advisable to take care, as untold amounts of confidential data are stored on our computers, USB sticks, CDs and DVDs etc. and represent a security risk, above all for trading companies. But what happens to these storage media at the end of their life? The Federal Office for Data Security makes an unequivocal recommendation that the rule for hard disks ...


    By HSM GmbH + Co. KG

  • Atelier Fouesnantais, France - Case Study

    TOMRA demonstrated viability of sorting graphic paper - A French case. TOMRA’s unique application for sorting graphic paper within the recovery of fibrous or flat material fractions for selective collections has now become a hot topic in France. At trade ...


    By TOMRA Sorting GmbH.

  • Should You Rent, Lease or Purchase Cardboard Balers?

    Waste disposal is more complex than just throwing away unwanted material. How you dispose of it, whether you recycle it and where it will ultimately land up are important concerns. Organizations all over the world are implementing environmental friendly methods to dispose of their waste. One popular technique is to compact the materials waiting to be recycled. Materials such as cardboard are made ...

  • Why Briquetting Machines are Favorite of Recycling Industries?

    With the increasing attention towards proper waste recycling, there has been huge requirement of right machines and tools to properly convert waste into useful things. One of the best solutions companies and individuals got was briquetting plant for effective recycling of wood as well as metal waste. What is the major process at the recycling company: to collect waste; to segregate different ...


    By Jay Khodiyar Machine Tools

  • Paper waste as far as the eye can reach - Case Study

    On the outskirts of Nashville, there’s a plant that’s making the most out of printing waste. Combined Resources is a paper recycler that encourages companies to “save money while reducing their carbon footprint.” For this reason, it makes a lot of sense that they own a WEIMA shredder. When you enter the plant, you’ll immediately see an enormous, red WEIMA WLK 18 ...


    By WEIMA

  • Tissue Manufacturer Uses WEIMA Machinery to utilize waste and increase profits case study

    Nestled in the rolling hills of North Carolina (USA) is a tissue manufacturing plant that will take your breath away at first glance. This state-of-the-art facility is over one million square feet and operates around the clock producing large quantities of tissue and paper towels. This particular plant prides itself in being safe, profitable, and environmentally friendly. In order to reach these ...


    By WEIMA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you