Parts Washing Articles

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

  • P-80® Temporary Assembly Lubricants are Ideal for Appliance Assembly and Service

    Dishwashers, washers and dryers, refrigerators, mixers, blenders, and many other appliances have rubber or soft plastic components such as hoses, O-rings, seals, grommets, plugs and more. The slip resistance of these parts makes assembly difficult. P-80® temporary rubber assembly lubricants significantly reduce friction helping these parts slide easily into place. P-80® lubricants are ...

  • Rapid, gentle blending maximizes strength of powder metal parts

    Nestled in the heart of the powder metal capital of the world, Allegheny Blending Technologies (ABT) specializes in custom blending of ferrous and non-ferrous powder metals that are sold to molders of powder metal parts. These blends of iron powder and additives (copper, nickel, graphite, manganese sulfide and dry lubricants) play important roles in products and equipment. In the U.S. automotive ...

  • Car Wash Wastewater Treatment - Case Study

    Wastewater Treatment Plant, Robina Car Wash, Qld Case Study: Car Wash WWTP Client: Robina Car Wash Year: 2012 Capacity: 800 l/h BACKGROUND Car washes use very little potable (mains drinking) water by using fine nozzles and high pressure hoses. Linked ...


    By Hydrasyst

  • Learning from Diapers – Life Cycle Assessment as an Investment Risk Mitigation Tool

    Remember the garbage barge? Back in 1987, the Mobro 4000, a barge carrying more than 3,000 tons of garbage from Islip, Long Island, famously departed from New York harbor bound for a landfill site in North Carolina because Islip’s own landfill site was nearly full. The aim was to use the garbage as part of a landfill gas project to generate clean energy. But the barge wasn’t ...


    By thinkstep

  • Automotive parts manufacturer case study

    Scope The heat-treating operation at this major automotive bearing manufacturer in Georgia involves quenching parts with oil followed by an aqueous cleaning proc-ess. Two cleaning tanks were dumped and re-charged weekly when they became too contaminated to clean parts effectively. The parts were susceptible to staining when the cleaning solution became overly contaminated and the ...


    By Separation Dynamics

  • Automotive parts manufacturer - Eaton US engine valve case study

    Scope US Engine Valve in SC had 16 small washing systems that were used to wash parts after machining with straight oil as the metalworking lubricant. These wash tanks were dumped and recharged weekly and the oil concentration in the washers climbed between cycles to 5% before dumping at the end of the week. During this cycle, the part tolerance measuring equipment could be adversely ...


    By Separation Dynamics

  • The Debate over the Economic Viability of Recycling

    The general view about recycling is that it is extremely beneficial to the environment. The majority of websites pertaining to environmental policies, be it private agency or government, say that a good citizen with moral credibility must do three things: Recycle everything Sort the waste ...

  • Heavy Machine Parts Cleaners: The Perfect Option to Maintain Heat Exchangers

    Heat exchangers are advanced equipment in industrial settings that help transfer heat from one medium to another efficiently. These days, heat exchangers find use in a wide array of industrial environments, such as petroleum refineries, space heating, sewage treatment, petrochemical plants, natural gas processing, air conditioning, refrigeration, and chemical plants. To guarantee proper ...


    By Daimer Industries Inc.

  • RYDALL MP doing its part in recycling case study

    A waste management company in Canada was experiencing problems removing contaminants from plastic containers that were being cleaned to prepare them for recycling. RYDALL MP  was recommended as a solution to these problematic contaminants. RYDALL MP approach RYDALL MP  was diluted (10:1) into the parts washer, heated to approximately 120°F and sprayed onto ...

  • Do You Need a Mobile Pressure Washer for Your Car Wash Business?

    Car wash business owners are often caught in a dilemma when they have to decide whether they need a mobile or stationary pressure washer for their car wash business. To purchase the right pressure cleaner for maintaining car exteriors, you should consider the requirements of your business. If you own a mobile car wash business, you will need to transport your equipment to different client sites ...


    By Daimer Industries Inc.

  • Tips to Buy Conveyor Belt Cleaner Equipment

    Conveyer belts are widely used in the food processing and packaging industry. They are also critical to the functioning of pharmaceutical labs and drug manufacturing facilities. These industries have stringent hygiene norms and, therefore, you need to ensure that any conveyor belt cleaner you use is non-polluting and does not generate exhaust. A conveyor belt cleaner is powered by electricity. ...


    By Daimer Industries Inc.

  • Easy Degreasing of Oil Drums with Pressure Washer Degreaser

    Proper functioning of large industrial machinery often demands the use of huge volumes of oil to grease the joints and other parts of the machinery. The oil used for various purposes in industrial settings is usually stored in oil drums. Once the oil has been used, the drums have to be efficiently cleaned and degreased before refilling oil. Now, this cleaning process is not an easy one if you ...


    By Daimer Industries Inc.

  • Four vital features of best carpet washers

    Carpet washers are, perhaps, the simplest machines among the cleaning industry equipment. These machines do not offer high output power like some of the other machines. However, what people planning to buy carpet cleaning machines must remember is that the simplicity or the lack of power does not make the buying of these machines any easier. Some of the simple features of carpet washers are vital ...


    By Daimer Industries Inc.

  • How Car Pressure Washers Offer Superior Car Wash Results?

    Advances in the field of science and technology continue to transform the way we perform routine cleaning activities. At the touch of a button, dirty clothes are transformed into clean and dry ones. Thanks to steamers, your curtains and heavy drapes no longer have to be taken down for washing. Stains on carpets were an issue for decades until rug washers arrived on the scene. Moreover, washing a ...


    By Daimer Industries Inc.

  • What Is Special About Car Pressure Washers?

    Car pressure washers are different than other machines. These are not like other pressure wash systems. The vehicle surfaces are delicate, so pressure cleaner systems with a specific pressure level are used for the cleaning purpose.  Why car pressure washers are special? The surfaces of automobiles vary a great deal in hardness and make. The external body is made of metals ...


    By Daimer Industries Inc.

  • Best Car Wash Equipment for Upholstery Cleaning!

    Cars are like our second home! Car upholstery, particularly, is an absolute mess due to different kinds of materials that keep dripping, falling, and settling on the seats and mats. Although these stains are not permanent, they are definitely more troublesome. Since many people do not have professional car wash equipment at home, most car owners prefer professional cleaners. No matter how much ...


    By Daimer Industries Inc.

  • Tips to Get the Best Out of Hot Water Pressure Washers

    You may have heard people complaining about hot water pressure washers. Something does not work, some parts get damaged, or it uses a lot more gas than anticipated, and so on. However, thinking rationally about it, you will realize that the problem is not with the machine, but that the machine itself is not equipped for the right cleaning applications. A machine is designed for certain uses. In ...


    By Daimer Industries Inc.

  • Knowing All About Car Auto Detailing Applications

    Car detailing is the process of cleaning the exterior and interior parts of a car. In fact, it is nowadays used to refer to cleaning any type of vehicle, such as trucks, buses, and vans. One thing that makes this seemingly easy task difficult is the presence of different types of surfaces in an automobile. Take for instance, a car. The interior surfaces, such as seat upholstery and mats, are ...


    By Daimer Industries Inc.

  • A Simple Guide to Use of Car Pressure Washers

    Simply put, car pressure washers are pressure washing machines used for auto detailing. These are normally used for cleaning the hard surfaces of an automobile, such as the metal body and engine parts. The high pressure output level of the machines lends themselves unsuitable for soft surface cleaning. Pressure washing machines are known for their high output power. Auto detailing, in contrast, ...


    By Daimer Industries Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you