Only show results in Virginia? Ok

Plasma Technologies services for Waste and Recycling

  • Biomedical Applications

    SMS has been a pioneer in biomedical applications. Coating solutions we provide include: Hydroxyapatite (HA), Porous Titanium (VPS/LPPS), Dense Tungsten-Rhenium for X-Ray targets, Nitriding and Boronizing for Ti and Ti6Al4V parts, Dielectric coatings (Alumina), Glaze/enamel coatings, SMS houses two VPS/LPPS (Vacuum / Low Pressure Plasma Spray) ...

    By Surface Modification Systems, Inc based in Santa Fe Springs, CALIFORNIA (USA).

  • Manufacturing Services

    G.F. Puhl is known for more than just designing and assembling high-quality trim collection systems. We build most of the parts and components used in our systems to exacting standards with quick turnaround times. At our 51,000 square-feet manufacturing facility in suburban Nashville, Tennessee, our staff of engineers, skilled craftsmen and ...

    By G.F. Puhl based in Gallatin, TENNESSEE (USA).

  • Custom Fabrication Services

    Bruning & Federle is proud to offer custom fabrication services to our customers.  Equipped with a full service metal fabrication shop, we are able to design and produce a large array of custom products to fit your specific needs.  Custom fabrication products consist of, but are not limited to, heavy industrial duct work ≤ 1/4' in ...

    By Bruning & Federle Manufacturing Co. based in Statesville, NORTH CAROLINA (USA).

  • Custom Cutting & Fabrication Services

    10' x 50' High Def Plasma with True Hole Technology. 8' x 24' High Def Plasma. 24' 750 Ton Brake. 10' 175 ton brake. Machitec-Diamond Cut 350HD Plasma.

    By CBI Manufacturing based in Linden, ALBERTA (CANADA).

  • Technical Support Services

    Tetronics is able to provide a wide range of technical support throughout all stages of project development to ensure efficient integration of your plasma system with the balance of your plant. Our highly experienced process engineers are on hand to assist you in designing a specialised process. In particular, offering advice ...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM. from Technical Support Services Service line

  • Fabrication Services

    Texas Aquatic Harvesting manufacturers their own equipment and has experts on staff to handle your custom fabrication needs. TAH can design and fabricate your project or modify your existing equipment based on your specifications. TAH uses state of the art CAD design.

    By Texas Aquatic Harvesting Inc. (TAH) based in Lake Wales, FLORIDA (USA).

  • General Fabrication Service

    PreFab Capabilities: 2-Plasma Tables; Torch-mate 11’x 20′ HD Plasma Table. 8′ x 11′ secondary plasma table. 2 – 10′ Break Presses (2nd Biggest in Montgomery County); Capable of bending up to 3/8″ plate.Can Crimp up to 10′ tall walls. 3 – Band Saws to cut any steel shape to length; 1 – ...

    By Triflo International Inc. based in Willis, TEXAS (USA).

  • Fabrication Services

    That’s how Mack Manufacturing makes sure every product we ship is up to the Mack standard. We hire the best people, and we give them the best tools to complete every step in the fabrication and machining of our products under one roof.

    By Mack Manufacturing Inc. based in Theodore, ALABAMA (USA).

  • Spare Parts Services

    We carry spare parts for most of the industry brands in ionization and plasma based purification system.

    By IonPlasma AB based in Crossville, TENNESSEE (USA).

  • Custom Nozzle Fabrication Services

    BETE can perform every procedure in-house, from casting to machining to assembly. BETE uses three basic spray nozzle fabrication processes: injection molding, machining from bar stock, and investment casting. Injection molding is used for large quantities of nozzles made from plastics such as PVC, ABS, and PVDF. Bar stock machining is often used ...

    By BETE Fog Nozzle, Inc. based in Greenfield, MASSACHUSETTS (USA).

  • Wagner - Custom Manufacturing Services

    Cladding is the bonding together of dissimilar metals. It is different from fusion welding or gluing as a method to fasten the metals together. Cladding is often achieved by extruding two metals through a die as well as pressing or rolling sheets together under high pressure.

    By Wagner Plate Works (WPW) based in Houston, TEXAS (USA).

  • Robust Solution to Spent Potliner

    Robust solution to spent potliner: Tetronics offers a safe and permanent treatment solution for Spent Potliner (SPL), thereby overcoming one of the biggest challenges faced by the global primary aluminium production sector. Tetronics’ robust solution delivers leading environmental credentials for the management of this highly problematic ...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM. from Robust Solution to Spent Potliner Service line

  • Plasma Power Different

    Plasma Power has taken a different approach to serving the market.  Unlike many others, we have a thermal plasma lab and test what we offer for sale.    These innovations afford high levels of production at very low emissions from virtually any feedstock, at a capital cost that is significantly less than current conventional design.

    By Plasma Power, LLC based in Fort Lauderdale, FLORIDA (USA).

  • Commercial Process

    Tetronics experience and technical expertise ensures all of our clients benefit from industry leading levels of support and advice throughout their journey from order placement to installation and commissioning as well as ongoing service and support. We offer a simple yet comprehensive step-by-step process that is flexible enough to be tailored to ...

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM. from Commercial Process Service line

  • Repair Services

    We repair and maintain everything that we sell and rent. Maine Oxy has fully equipped service departments at our Auburn, Maine and Brewer, Maine facilities. Our service technicians are factory-trained and kept up-to-date on equipment repair by a continuing program of education and specialty schooling.

    By Maine Oxy based in Auburn, MAINE (USA).

  • Lampson Manufacturing Services

    Lampson International maintains a fully equipped fabrication, assembly, remanufacture, finishing, and test facility at its headquarters in Washington State, USA. These facilities boast all the capabilities required to fabricate heavy equipment including, welding shops, machining facilities, laser guided flame and plasma arc cutting, sheet metal ...

    By Lampson International LLC based in Kennewick, WASHINGTON (USA).

  • Burn Services

    Craft’s burning, welding, and fabricating capabilities are extensive. An electronically controlled plasma arc burning system will flame cut a fifteen inch thick plate of mild steel as well as aluminum and stainless. Welding equipment is available to perform MIG, TIG, submerged arc, and SMAW welding. The company is qualified to AWS, ASME, and ...

    By Craft Machine Works based in Hampton, VIRGINIA (USA).

  • Services

    Registered as a non-profit association, BalticNet-PlasmaTec (BNPT) is an international cluster – located in Greifswald, Germany – which stands for a technology and market-oriented cooperation of science, research and economics in the field of plasma technology. As one of the most important plasma technology clusters in Europe, ...

    By BalticNet-PlasmaTec based in Greifswald, GERMANY.

  • Replacement Parts / Ionization/Plasma Tubes

    We carry replacement parts for most of the industry brands in ionization and plasma based purification system.

    By IonPlasma AB based in Crossville, TENNESSEE (USA).

  • Ferritic Nitrocarburising Services

    Ion (Plasma) nitrocarburising is a heat-treatment, similar to Plasma Nitriding, but a small percentage of an additional gas is added in the the vacuum chamber during the process. This gas is a carbon containing one, that helps for the formation of a bigger compound (white) layer, that is formed on top of the diffusion zone. This type of ...

    By Ionitech Ltd. based in Sofia, BULGARIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you