Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic products.
REDWAVE is a flexible system with applications in a variety of fields, especially for the plastics industry. No matter how complex the sorting task may be the REDWAVE range of sorting equipment can achieve high levels of purity. REDWAVE guarantees high waste throughput with effective recovery of required materials, achieving maximum return on the separated commodities.
Elimination of contaminants; Ceramics, stones, porcelain, Metal, Glass ceramic (heat resistant glass), Leaded glass, Organic impurities, Plastics, Cork, Paper. Sorting and recovery of; White glass, Green glass, Brown glass, Other colors and combinations of colours.
Ragger wires, also known as “pulper tails” and “pulper ropes”, are reject secondary raw materials that are created when waste paper is recycled. Ragger wires consists of the plastic trimmings, staples, tape, labels and baling wire found in baled post-consumer paper waste. It is made up of approximately 45% steel and 55% post consumer waste and must be removed from the pulper.
Acids, alkalis, solvents, isocyanates - Anyone dealing with hazardous substances and transporting them in containers is always faced with the problem of proper disposal of the containers in the end. For a long time, the common practice of reconditioners was to dismantle used and non-reusable containers after cleaning and either recycle or dispose of each substance separately. The plastic inner containers were collected and transported by truck to the waste incineration plant. However, this method caused very high...
During paper manufacture, waste paper and to some extent beverage cartons are reprocessed for the production of paper products. In the first stage of material processing, large quantities of waste paper are dissolved in so-called pulping drums or pulpers using process water and defibrated. The impurities in waste paper, mainly in the form of plastics, are separated from the paper during production. This residual fraction is known as reject and contains approx. 25% (coarse) fibres, 25% plastic and 50% moisture....
A plastic waste installation separates, sorts and processes valuable packaging materials, such as PET, PE, PP and Tetra Pak, ferrous and non-ferrous metals, which are then baled and shipped for reuse. Bollegraaf’s effective and innovative solutions remove plastics from waste, minimising the amount going to landfill. Our equipment can work with existing combined waste streams and in specialist plastic only sorting installations. Optimising economic value with the lowest possible costs per tonne is the...
REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from. Before the E-Waste enter into the shredding process, any contaminating material, like batteries, color cartridges, tonners, etc., must be removed manually from the incoming devices.
In the areas of chemicals, pharmaceuticals and foodstuffs, there are numerous possible applications for Flottweg Tricanter, Sedicanter and Sorticanter machines as well as decanters, belt presses and separators: Manufacturing lactose and casein in the dairy industry, separating plastics - plastics recycling, algae harvest, manufacturing soya milk and soya proteins, drying okara, manufacturing wheat starch, dewatering PVC, dewatering suspension polymers.
Printer consumables and empty toner cartridges cannot be grouped with municipal solid waste but require special treatment for recycling. FORREC has designed an exclusive plant that provides specific processing for this type of waste. The system developed and produced by Forrec consists in a treatment with a four-shaft shredder that provides a reduction to less than 40mm allowing the subsequent separation of iron, plastic and non-ferrous materials. A dust suction system is combined with a shredding system.
By Forrec srl
based in Santa Giustina in Colle, ITALY.
TOMRA can help you sort the value out of Pre-sorted material. The input material of pre-sorted plastics will usually contain materials such as bottles and foil. Before recycling, any impurities need to be cleaned out in order to sort out any residue of organic matter, metals, PVC or coloured PET. The material is checked for colour and material.
In the bottle-to-bottle procedures highest and consistent quality standards are required.
SSI offers a variety of low-speed, high-torque shredding solutions for pulp and paper mill materials processing to increase mill efficiency. SSI shredders can be found in large paper processing operations around the world. Whether it’s shredding prior to a baler to increase density, shredding with commingled materials to mix and create another product, or shredding prior to a pulper at a mill, we have a machine for that.
The Natural Energy Solution uses a proprietary, patented process called Gas Phase Reduction (”GPR”). This is a highly effective, non-incineration method that converts all organic waste within the plastic mix.
Solvent based inks in different colors and patterns are applied to paper, plastic, film and foil substrates. Finished products include all sorts of wrapping paper, wall covering, candy wrappers, flexible food packages, shrink labels, high quality magazines and many, many more. These industries employ ovens or dryers to remove the solvents from the finished product.