Only show results in Virginia? Ok

Plastics Recycling Applications

  • Ozone monitoring

    Ozone found in ambient air can have a direct affect on human health and also has the potential to create photochemical smog. It is for this reason that the U.S. EPA has set a one hour limit of 120 ppb and an 8 hour limit of 80 ppb. Ozone has been found to affect human health by harming the respiratory and immune system. People with pre-existing respiratory damage or diseases are more likely to suffer from the affects of ozone.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Hydrocarbons monitoring

    Hydrocarbons are a family of organic chemicals consisting of carbon and hydrogen atoms arranged in a variety of ways. Hydrocarbons are found naturally in crude oil and are released into the environment with its combustion (power plants, home heaters etc).

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Industrial Engineered Plastic for the Wastewater Industry

    Over the past decade, Diversified Plastics has become a leading provider of sprockets and other plastic components to the wastewater industry. This is, in part, because many treatment facilities are moving away from metal and toward plastic components.

    • Plastic components are much lighter than steel, reducing shipping costs and making them far easier and less labor-intensive to install.
    • Plastic components are as or more durable than steel and reduce friction, which lengthens the life of the mating components and also lowers energy consumption.
    • Plastic components not only cost less to purchase upfront, they reduce long-term maintenance costs.

    By Diversified Plastics, Inc. based in Missoula, MONTANA (USA).

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Oil Water Separator for Hydrocarbon Recovery from Flowback, Produced Brinewater

    Hudson Oil Water Separators can be used to reclaim more oil and hydrocarbons from flowback, produced water, brine water or waste water before sending this value stream to disposal/injection sites. To enhance recovery even further package a Hudson Separator with a Wilsa ElectroWaveTM Conditioner for ultimate results. Up to 99.999% of oil and hydrocarbons recovered, including emulsified oils. Please call us today to evaluate your recovery potential.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Permeable Plastic Paving For Golf

    Ecogrid is known across Europe as Ecoraster as this is the direct translation. Ecogrid is known as Ecoraster and Stabiligrid in the USA and Canada. Ecogrid – Ecoraster should not be confused with products such as Netlon, netpave 25, netpave 40, netpave 50, adpave, hebden40, hebden401, hebden 402, geogrid, bodpave, bodpave 85, ecopaving. These products are not approved by nato or the TUV house and they do not have the patented Ecogrid Ecoraster locking mechanism that securely fixes the grids In place permanently.

    By Ecogrid Ltd based in Wallasey, UNITED KINGDOM.

  • Dewatering of explosive / corrosive media for waste management industry

    In customer-specific chemical processes, explosive and corrosive solvents are used to systematically change the stock characteristics of e.g. pulp or plastic which calls for appropriate measures to protect the machine as well as the environment. To meet such requirements, BELLMER KUFFERATH Machinery has adapted their screw presses` proven functional concept to suit special requirements, such as:

    By BELLMER KUFFERATH Machinery GmbH based in Düren, GERMANY.

  • Respirometer Applications

    Measurement of the aerobic biodegradability of plastic materials (US Standard ASTM D5338, European Standard ISO 14855)

    By ECHO d.o.o. based in Slovenske Konjice, SLOVENIA.

  • Filtration systems & solutions for printing industry

    The use of quality inkjet filtration products is essential to reduce print head or fine nozzle blockages, increasing productivity, decreasing maintenance, improving print quality and minimising costs. Enhanced cleanliness, through filtration of aqueous or solvent based fluids and colourants within inkjet machinery, allows higher flow rates and therefore accelerated printing times.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Premium

    Waste Compaction for the Plastic Packaging Film Industry

    Normal, clear or coloured packaging film is usually made from polyethylene (PE) and is the most widely recycled plastics material. Recovered waste material such as film, bags, sacks and pallet wrap, can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs.

    HSM provides balers for use with plastics in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required.

    Our new generation of modern balers have been created to use low levels of energy, generate a minimum level of noise and operate without the need for constant supervision.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Metering of Solids

    If you need to meter powder and granulates with accuracy, ProMinent systems are the right choice. They always store, transport and process solids reliably and precisely thanks to our exacting quality requirements.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Odor Control for Rubber and Plastic

    From Process To Product, We Remove Odors From Rubber And Plastic

    Malodors, whether connected to the process or embedded within the end product, are an inherent concern associated with manufacturing polymers. Fortunately, OMI Industries has a versatile solution that’s proven to work within the plastics and rubber industries.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Industrial shredders system for plastic shredding sector

    Plastic is a versatile material. Characteristics range from tough polymer structures to extra-firm high-tech materials. Efficient size reduction requires experience and know-how. We are able to customise our machine designs to be suit your requirements, for example; process configuration, footprint and throughput, thereby creating the optimum solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Automobile injection-moulded shredding for the special waste recycling industry

    Shredding plants for plastics from automobile industry as well as injection-moulded parts.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Shredders for Electric and Electronic Equipment (WEEE) and Refrigerators

    Electric and electronic waste (WEEE), are coming from technology products such as home appliances (washing machines, vacuum cleaners), computers and tools. An economy based on the consumption such as today, provides a continuous increase of WEEE, and determines an increasing risk of dropping out in the environment or in landfills, with the consequences of pollution of soil, air, water and health human repercussions. These products should be handled properly and used for the differential recovery of the materials they are made of, such as copper, iron, steel, aluminum, glass, silver, thus avoiding a waste of resources that can be reused to build new equipment in addition to the environmental sustainability.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Premium

    Packaging Sorting

    Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility). However, this does not present us with a problem. At TOMRA Sorting, regardless of the collection system operated, we are able to optimally sort the valuable fractions with high efficiency and purity. We currently operate sorting units at packaging MRF’s in many countries including Belgium, Canada, Germany, Italy, The Netherlands, Spain, UK and USA.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Reliable Shredding Technology for Plastic Materials

    As a renowned manufacturer of reliable plastics shredders, we offer special machines for in-house recycling and for heavily contaminated post-consumer waste. Due to its format, components and characteristics, plastic is a very versatile material that is primarily used in industrial mass production. The resulting plastic waste can be recycled by shredding and washing the material, before generating a reusable, recycled granulate. Shredded plastic waste can also be used for energy generation.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Recycling of plastic waste

    Recyclable plastics can come from a large range of sources. Shredder residues containing plastics are typically coming from small domestic appliances, electrical and electronic equipment and cars. These materials each have their own difficulties when they have to be processed to recover clean plastics. With the GRS equipment we are able to handle each type of these materials.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you