Only show results available in Connecticut? Ok

Precious Metal Recycling Applications

  • Premium

    Machineries for e-waste shredding & recycling

    Governments and manufacturers of electronic hardware are increasingly coming under pressure regarding the safe disposal of electronic waste once their useful life has been completed. End-of-life (EOL) legislation for e-scrap is in place in many countries and pending throughout Europe and North America. Shred-Tech® has engineered and manufactured custom systems to shred, separate and recover the component materials that make up these electronic products.

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Machineries for product destruction & recovery

    Complete Turnkey Systems, custom designed and manufactured by Shred-Tech®, destroy, recover and separate a wide variety of off-spec, mis-packaged and out-dated products. Shred-Tech®’s Material Separation and Recovery / Destruction Systems are used around the world for recovering precious metals from computers and telecommunications scrap, nylon from carpet, and recyclables from MSW, just to name a few. Mis-packaged consumer products such as breakfast cereals, cosmetics, milk and juice containers,...

    By Shred-Tech Corp. based in Cambridge, ONTARIO (CANADA).

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Recycling equipments for non-ferrous scrap metal shredding & recycling

    Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Mining & minerals solutions for precious metals industry

    WesTech designs and manufactures a full range of thickeners for the minerals industry for product concentration, tailings disposal and CCD circuit washing, including HiFlo Thickeners, AltaFlo Thickeners, and Deep Bed Paste Thickeners. Design-build and turnkey projects are our specialty. Our reputation for excellence has been built one project at a time. Stateside and worldwide, WesTech provides a wide range of process equipment to help maximize the value of your resources.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Elemental Analysis for Automotive Catalyst Recycling – Reclaim Precious Metals

    Used catalytic converters are collected and recycled in order to reclaim the precious metals Pt, Rh and Pd. Typically, the entire honeycomb core is removed and ground into fine powder. Once in powder form, the precious metal catalysts can be extracted, or the powder can be sold to a refiner. The honeycomb core is typically ceramic, containing combinations of the elements Al, Si, Fe, Zn, Sr, Zr, Ba, La and Ce. Some cores can be made of a stainless steel honeycomb and so would contain higher Fe and other metals....

    By Applied Rigaku Technologies, Inc. based in Austin, TEXAS (USA).

  • Premium

    Elemental Analysis for Mining & Refining by EDXRF / XRF

    Mining is the extraction of valuable minerals or other geological materials from the earth, usually from an ore body, vein or (coal) seam. Materials recovered by mining include base metals, precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash. Whether the determination entails measurement of ores, feed, slags, or tailings in the mining process, X-ray Fluorescence (XRF) spectroscopy is one of the most commonly employed technique for these routine determinations of metal...

    By Applied Rigaku Technologies, Inc. based in Austin, TEXAS (USA).

  • Premium

    Metal sorting for the metal recycling industry

    Metals can be identified according to the colour, nature of the metal and of elemental composition.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Optical sorting machines for electronic scrap (WEEE) industry

    Recovery of recyclables from Waste Electrical and Electronic Equipment (WEEE): Metals and alloys. Plastics (thermoplastics, plexiglass, etc.). Composite materials (circuit boards, etc.). Brominated plastics (BFR). Plastics with cadmium compounds. Material tainted with precious or recoverable metals (e.g. copper, brass, silver, etc.). Sorting of monitor glass (CRT), etc.

    By REDWAVE - a division of BT-Wolfgang Binder GmbH based in Eggersdorf bei Graz, AUSTRIA.

  • Premium

    Air pollution control solution for fiber optics sector

    The manufacture of fiber optics involves the integration of various metal compounds to assist with the refraction of light within the fiber. Production of fiber optics create gaseous and sub-micron particulate emissions that are extremely valuable to recapture. A major fiber optic manufacturer has purchased multiple scrubber systems from the Clean Air Group, LLC to not only meet air emission standards but to capture this valuable product. Not only has the Clean Air Group, LLC APC system reduced the customer’s...

    By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain...

    By Erdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY.

  • Premium

    Evaporators and concentrators for goldsmith

    Concentration of washing, ultrasounds, pickling, concentration of emptying baths of copper and recovery of the acid, recovery of gold from the concentrate.

    By Eco-Techno SRL. based in Busnago MB, ITALY.

  • Premium

    Liquid/solid separation equipment for precious metals - gold and silver

    Countercurrent Decantation (CCD): Rock passes into a dump hopper and is then transferred to a vibrating grizzly screen. The oversized material is sent to a jaw crusher. The crushed product is combined with the grizzly undersize and the ore is conveyed to the coarse ore bin.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Special plants for recycling of electronic waste (WEEE)

    Proper disposal of electronic waste (WEEE) and of waste in the R4 category, i.e. waste such as electrical and electronic equipment, allows the recovery of a large number of precious metals and components.

    By Forrec srl based in Santa Giustina in Colle, ITALY.

  • Premium

    Corrosion-resistant Materials for the Chemical & Petrochemical Processing Industry

    Sauereisen’s diverse line of corrosion-resistant materials stands up to the extreme temperatures, pH levels and physical abuse that are commonly found in chemical and petrochemical facilities. Whether these facilities need protection for secondary containment, flooring, immersion or flue gas environments, Sauereisen has an inclusive product offering to provide the necessary protection and security. Our products have stood up to the challenges in acid plants, refineries, steel pickling lines and precious...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Shredding of swarf recycling with Mercodor equipment

    For the optimal processing and reduction of steel and stainless steel chips, cast, aluminium, copper, brass, titanium and precious metal turnings, for instance, Mercodor, with its rugged, compact precision cutters has the right solution for each and every task.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Corrosion-resistant Materials for the Mining Industry

    Sauereisen polymer concrete is a heavy-duty castable used in the mining and precious metals refining industries. These products provide impressive physical strength, abrasion resistance and very low permeability. Polymer concrete can be an economical alternative to brick when project conditions call for a long-lasting system that is easy to install.

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Activated carbons solutions for mining industry

    The Challenge: The gold extraction industry faces perennial challenges even in times when gold prices are high. Mines must strive to process ore of diminishing quality, and control operating costs at levels that maximize the return on investment. The need to maintain environmental responsibility adds to the challenge. Selecting a provider of high quality activated carbons is vital to the bottom line. Almost half of all Adsorption-Desorption-Recovery (ADR) plants worldwide use Jacobi’s activated carbons...

    By Jacobi Group based in Kalmar, SWEDEN.

  • Premium

    Filter presses solution for mining & minerals industry

    MSE filter presses are used in processing plants of the mining industry due to the positive aspect of the great process-technical flexibility among other things. The most frequent applications are the dewatering of fine coal and coal tailings (finest fractions) as well as the solid-liquid separation of the ore concentrate suspension concentrated by flotation and subsequently separated from mineral by-products. At this point, metals such as zinc, iron and copper are extracted, but precious metals such as gold,...

    By MSE Filterpressen GmbH based in Remchingen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you