Only show results available in Virginia? Ok

Pressure Cleaning Applications

  • Premium

    Ultraviolet disinfection systems for the hydro pools industry

    Spas and therapy pools are often specialised applications, which operate with both increased temperatures and increased water turbulence. Due to the high temperature of the water and increased bather loads, pool applications, such as spas and therapy pools, are breeding grounds for harmful microorganisms, such as E-Coli and Cryptosporidium, despite high levels of chlorine.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    Industrial wastewater solutions for crack detection wastewater

    Tracking the tiniest cracks – with H2O wastewater treatment. Heavy use, material fatigue and material faults can cause tiny cracks in plastic and metal parts. These are so small that they are invisible to the naked eye. But they can still be relevant to safety, e.g. on the wings of passenger jets. That’s why these parts are regularly checked for micro cracks. One way of doing this is the dye penetration process, where the part to be checked is first thoroughly cleaned. Applying a special dye and using a suitable developer, the tiniest cracks become visible on the surface, enabling defective parts to be easily identified and replaced. If the crack check reveals no problems, the transfer agents are washed and approved for further operations.

    By H2O GmbH based in Steinen, GERMANY.

  • Vacuum excavation solutions for locate underground utilities / soft dig / pot holing

    Vacuum excavation is fast becoming a best practice in the field of construction and site excavation. Why? Because it uses jets of air (air excavation) or water (hydro excavation) to loosen soil, instead of a heavy metal claw. After loosening, the soil is pulled out of the ground through an air vacuum hose to a debris tank for later disposal or back-filling. Using non-destructive technology can quickly, safely and economically excavate in areas inaccessible to conventional digging equipment like backhoes and trenchers.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Paint shop cleaning

    Problem: Build-up on grates, skids, hooks, and carriers reduces paint shop efficiency and often leads to a below-quality finish. Chemical stripping and incineration are effective, but are hard on operating personnel and expose them to hazards.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • No Pressure transportation of liquid

    HDPE Double Wall Corrugated Pipe is one of the best solutions for the transportation of liquid using gravity. This is because the pipe is made up of two layers. From the inside its smooth, and from the out side it is corrugated to give the pipe high ring stiffness.

    By Hebeish Group based in Cairo, EGYPT.

  • Waterjet protection

    By TST Sweden AB based in Kinna, SWEDEN.

  • Casting removal

    Problem: Ceramic shells are typically chipped away from investment castings, a process that is not only tedious and labor-intensive, but can damage the casting inside. The more intricate the casting shape, the bigger the problem.

    By NLB Corp. based in Wixom, MICHIGAN (USA).

  • Environmental technology for petroleum refineries industry

    Particulary high demands are placed on vacuum systems used in this industrial area. Exactly matching Körting steam jet vacuum pumps and Körting surface condensers fulfil the highest requirements. A reliable design for optimum consumption figures can be guaranteed at all times because of our company`s specially developed design software for these processes.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for paolyester plants industry

    For vacuum generation during the polycondensation process specially developed glycol steam jet vacuum systems are used.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems to handle emissions from conveyors, elevators and feeders. Smelt dissolving tank particulate and TRS gases. Direct contact waste heat recovery. Black liquor evaporation. Treatment and subcooling of boiler and kiln gases to remove particulate, sulfur dioxide and TRS for precipitated calcium carbonate production (PCC). Dust from tissue and paper rollers and dryers. NASH and sodium hypochlorite scrubbing. Waste heat recovery with direct contact heat exchangers.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Ice blasting technology for petro chemical

    Applications of Coulson Ice Blast in the Petro Chemical sector:

    Ice
    • Cleans hydrocarbons deposits
    • Cleans convection section from combustion ashes
    • Cleans Convection Section from Combustion Ashes
    • Removes asphalt from steel panels
    • Removes bitumen
    • OCTG de-greasing
    • Cleans polymer Tanks
    • Cleans hose connectors and manifolds
    • Cleans insulation jacketing
    • Cleans post spill antioxidants
    • Cleans turbine wheels and rotating parts
    • Cleans stationary & mobile equipment
    • Asbestos removal

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Ice blasting technology for power generation

    Applications for Coulson Ice Blast in the Power Generation sector:

    Ice:
    • Turbines Generators & Compressors
    • Boiler shells & tubes
    • Furnaces, Fireboxes, cladding & stacks
    • Transmission devices like switch gear, circuit breakers & transformers
    • Isolators & bushings without any damage to the material or equipment
    • Motors & pumps
    • Various types of stationary & portable equipment
    • Relays, protection & safety equipment & batteries

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Ice blasting technology for general maintenance and facilities

    Applications for Coulson Ice Blast in the General Maintenance and Facilities sector:

    Ice

    • General & Production equipment
    • Ceilings and walls
    • Equipment degreasing
    • Surface cleaning Before Painting
    • Forklifts
    • Electric motor/ Boxes
    • Control Panels
    • Pipes, Hoses and fittings
    • Conveyors
    • Cooling Fans
    • Hydraulic Parts
    • Robotics
    • Sanding belts
    • Injection equipment
    • Cleaning Molds

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Ice blasting technology for automotive

    Applications for Coulson Ice Blast in the Automotive sector:

    Ice

    • Removes sand and contaminants from casting box
    • Removes contaminants from mold components
    • Removes overspray buildup from hooks
    • Removes residual slag and contaminants from weld line
    • Cleans E-coat residue from fixtures
    • Cleans blow mold cavity
    • Cleans contaminants from mold cavity and plug
    • Removes accumulated residue from mold, ports and release pins
    • Removes accumulated release agent and residual foam
    • Dechipping, deflashing, deburring of different components
    • Removes accumulated mold release agent and residual molded material
    • Aluminum clam shell molds

    Enhanced ice

    • Weld Line
    • Removing paint
    • Removing rust

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Ice blasting technology for military

    Applications for Coulson Ice Blast in the Military sector:

    Ice
    • Armor vehicle cleaning
    • Tank cleaning
    • Decontaminate field vehicles
    • Sewage tank cleaning
    • Water reservoir cleaning
    • Decontaminate radioactive material
    • Chemical weapons remediation
    • Site Preparation
    Enhanced Ice
    • Remove Paint
    • Remove Rust

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Compact Filtration for Parts Cleaning / High-pressure Cleaning

    Parts cleaning in the automotive industry; In view of the growing variety, shorter delivery times and continuously rising output volumes, short cycle times ensure both manufacturers and suppliers in the automotive industry remain competitive on the international market while safeguarding high parts quality and manufacturing precision at the same time.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Solutions for the equipment decontamination

    BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Ice blasting technology for engineered wood

    Applications of Coulson Ice Blast for Engineered Wood producers sector:

    Ice
    • OSB/ RFS/ Hot Presses
    • Glue Mixer
    • Pitch & Resin Removal
    • Finger Jointer Press
    • Kiln Dryers
    • Peeler/ Lathe
    • Glue Applicator Heads

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you