Pressure Washing Equipment For Waste And Recycling Available In Nevada
-
ShowcaseManufactured by Excalibur Water Systems Inc.based in CANADA
The Excalibur Water Systems Industrial Clean-In-Place System facilitates the cleaning and restoration of reverse osmosis membranes by purging the foulants that develop during regular equipment operation. This operation restores a degree of a membrane’s performance while eliminating the need to manually remove the membranes to clean or replace them. CIP models can manage varying degrees of ...
-
ShowcaseManufactured by Lenntech Water Treatmentbased in NETHERLANDS
Low energy demand and high recovery, Fully automatic system, microprocessor controlled, Mounted on plastic skid, The system includes: 5 microns filter, High pressure pump, Permeate conductivity display, RO or NF membranes 2,5' membranes, PVC Pressure vessels, Flowmeters and Pressure gauges, RO controller, Option: antiscalant dosing ...
-
PremiumManufactured by ForeverPure Corporationbased in USA
Standard Features: TFC high rejection, high performance brackish water membrane. High pressure RO pump. High pressure gauge. Product flow meter. Sediment filter in 20" housing. Carbon block filter in 20" housing. Solenoid valve. PVC pressure vessels. High pressure tubings. Powder coated frame. Concentrate control ...
-
PremiumManufactured by ForeverPure Corporationbased in USA
The construction of the membrane is a Thin Film Composite (TFC). It is the ones of the highest quality membranes available in the industry. The reverse osmosis pressure vessel is a heavy-duty housing made of corrosion resistant fiberglass. ...
-
PremiumManufactured by ForeverPure Corporationbased in USA
ForeverPure Seawater water reverse osmosis systems are fully manufactured and tested in the Silicon Valley, California, USA. Only the highest quality components are used in our products. These components include FILMTEC membranes, Allen Bradley or Siemens PLC, Siemens/ABB contactors, Danfoss or FEDCO Pumps, and etc.. Combining decades of water treatment equipment manufacturing experience and ...
-
PremiumManufactured by ForeverPure Corporationbased in USA
Standard Features: TFC high rejection, high performance brackish water membrane. Stainless high pressure RO pump. High pressure gauge. Product flow meter. Sediment filter in 20" housing. Carbon block filter in 20" housing. Solenoid valve. Fiberglass pressure vessels. Stainless tubing on high pressure side. Powder coated frame. Stainless steel concentrate control valve. ...
-
PremiumManufactured by ForeverPure Corporationbased in USA
Standard Features: TFC high rejection, high performance brackish water membrane. High pressure RO pump. High pressure gauge. Product flow meter. Sediment filter in 20" housing. Carbon block filter in 20" housing. Solenoid valve. PVC pressure vessels. High pressure tubings. Powder coated frame. Concentrate control valve. ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
High rejections membranes Energy recovery by turbine or pressure exchanger to maximize cost savings. All equipment mounted on stainless steel 304 skid Standard control with RO micro-controller and conductivity display Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s SFC-M5 50 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 50 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a CO2 ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
In some processes, the Flottweg curved screen supports starch and gluten separation or static solid-liquid separation. Flottweg Curved Screens (BSF) The Functional Principle: A curved screen works on a simple principle. The screen is made of metal profile rods whose edges lie in the direction of flow of the medium. The result is that the solids slide down under the force of gravity. At the same ...
-
PremiumManufactured by Daimer Industries Inc.based in USA
The Super Max 9000 commercial/industrial pressure washer appears similar in appearance to the 7000 steam pressure washers, but offers higher pressure and operates on 220-240v / single phrase/ ...
-
PremiumManufactured by Daimer Industries Inc.based in USA
The Vapor-Flo 7475 is an international pressure washing model that uses electricity for powering up and heating. It is preferred by operators for diverse commercial and industrial cleaning ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
High rejections membranes. All equipment mounted on stainless steel 304 skid. Standard control with RO micro-controller and conductivity display. Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and SCADA. The system includes: Antiscalant dosing station. 5 microns filter. High pressure pump. SW membranes 4 " membranes. Fiber glass pressure ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 550 ARP high-pressure plunger pump provides a max. operating pressure of 400 bar and a max. flow rate of 819 l/min. The ARP series has operating pressures up to 400 bar and flow rate up to appr. 1700 l/min. This plunger pump also works reliably with media contaminated with granular of fibrous solids that have a concentration of up to 3% and a grain size of 50 – 350 μm. This ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 1502 high-pressure plunger pump provides a max. operating pressure of 750 bar and a max. flow rate of 224 l/min. The ultra high pressure pumps of the 02-series with operating pressures up to 750 bar and flow rates up to approx. 230 l/min, are ideal for the cleaning of pipes and tube bundles, vessels and containers. The seal system of this plunger pump is very easy to maintain due to ...
-
PremiumManufactured by WOMA GmbHbased in GERMANY
The Type 1503 high-pressure plunger pump provides a max. operating pressure of 200 bar and a max. flow rate of 402 l/min. The ultra high-pressure pumps of the 03-series with operating pressures up to 250 bar and flow rate up to approx. 400 l/min, are the specialist for descaling as well as for cleaning of sewers and pipes. In addition to the corrosion-resistant stainless steel version, WOMA also ...
-
PremiumManufactured by Mobile Power Equipment, LLC (MPE)based in USA
4GPM 4200 PSI Standard Features: Honda GX390 Gas Engine Belt Driven Triplex Ceramic Plunger Pump 4-Wheel Heavy Duty Steel Cart Design with Wheel Locking Brake System All Units are Completely Factory Assembled in The USA and Delivered Ready to Operate. INCLUDES: Hose Reel W/300'x 3/8" Jetter Hose Selective Hydro - Pulse (Pulsation On Demand) Easy Start Valve - No Load Starting 3 - Jetter Nozzles ...
-
PremiumManufactured by D. R. Sperry & Companybased in USA
762mm aluminum heated ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-50 from Sepiatec is a compact and easy-to-use chromatography system for preparative separations on small columns by means of supercritical fluid chromatography (SFC). The system offers the comprehensive benefits of SFC technology, such as faster separations, lower costs due to reduced consumption of organic solvents, as well as being more environmentally friendly at increased ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you