0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h. Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon CDLb produces ClO2 discontinuously using the ...
Measuring ranges: 0.05 – 10 mg/l and 0.1 – 20 mg/l. Precise measurement of dissolved oxygen with DULCOTEST sensors – very wide range of applications, from the monitoring of water rich in oxygen, including surface water or potable water, to the reliable control of minimal oxygen concentrations when aerating aeration tanks in ...
Capacity range 50 – 420 l/h, 16 – 4 bar. Robust motor-driven metering pumps like the Sigma/ 2 Basic guarantee excellent process reliability with their patented multi-layer safety diaphragm. The diaphragm metering pump offers a number of power end versions, also suitable for use in areas at risk from explosion.
Capacity range 146 – 1,030 l/h, 12 – 4 bar. The patented multi-layer safety diaphragm for excellent process reliability is just one feature of the extremely robust motor-driven metering pump Sigma/3 Basic. It also offers a wide range of power end versions, such as three-phase or 1-phase AC motors, also for use in ATEX areas.
Graduated measuring ranges 0.01 – 10 mg/l. Bromine measurement with DULCOTEST sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water qualities.
Capacity range 17 – 144 l/h, 12 – 4 bar. The Sigma/ 1 Basic is an extremely robust motor-driven metering pump with patented multi-layer safety diaphragm for excellent process reliability. It offers a wide range of power end designs, such as three-phase or 1-phase AC motors, also for use in areas at risk from explosion.
Typical measuring range -1,500...+1,500 mV; wider ranges are possible depending on the measuring device. ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements.
Extraction rates of up to 8,000 l/h. Polymer batching station Ultromat ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer solutions.
Capacity range of up to 8200 l/h. The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally utilised.
The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, waste water treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor monitoring.
Capacity range 120 – 3,800 l/h. Manual polymer batching station Ultromat MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and cost-effective.
Extraction rates of up to 2,000 l/h. The ProMinent metering system Ultromat ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation aids.
Graduated pH measuring ranges 0 – 14. pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured values.
Measuring ranges 0 – 100 °C. Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen peroxide.
0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h, up to 6 points of injection possible as standard. Flexible solutions for the production and metering of ClO2 adapted to our customer's tasks, requirements and ...