We couldn't find any waste & recycling equipment suppliers or service providers located in Netherlands Antilles

Here is a list of equipment results with suppliers serving Netherlands Antilles

Waste & Recycling Equipment available in Netherlands Antilles

  • Freddy - Model KSV45 - Swarf Vacuum

    The Freddy KSV vacuum is a portable vacuum designed to pick up swarf.  The KSV/W is designed to pick up engineering coolant (suds), metal chippings and swarf (but not spirals). The KSV/C is designed to pick up metal chippings and swarf (but not spirals) where there is little or no liquid present. The KSV/W has a perforated steel basket with a ...

    By Freddy Products Ltd based in Pershore, UNITED KINGDOM. from Swarf Vacuums Product line

  • LIANYIJIUZHOU - Model TGSG - Bitumen Coated Fiberglass Geogrid for Asphalt Reinforcement

    LIANYI fiberglass geogrids are specifically warp knitted fiberglass Geogrids ideal for asphalt reinforcement. These fiberglass geogrids are coated with a bituminous material which ensures proper adhesion to the asphalt layers over the tack-coated surface. Bituminous coating further optimizes the chemical compatibility between the fiberglass ...

  • FUCHS Aerobic Digestion at 30-50°C

    Stabilization of sewage sludge is a basic requirement for agricultural use. Aerobic digestion in a separate basin is a simple and cost-effective way to increase the capacity of existing wastewater treatment plants. Sewage sludge as well as manure are stabilized and at thermophilic temperatures (> 50°C) disinfected, if required. Aeration of ...

    By Fuchs Enprotec GmbH based in Mayen, GERMANY. from Sewage Sludge Treatment Product line

  • Model XM-40 - Chute Fed Compactors

    A hydraulically operated concentric ram compactor utilizing the extrusion principle. Refuse is forced through the nose of the compactor, which contains a unique set of restrictors. The compactor body and compaction chamber are rugged and durable. They are tubular in shape, forming one continuous body of high strength 3/8' steel plate. The ram is ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Chute Fed Compactors Product line

  • Model 10-T - Chute Fed Compactors - Bulkhead Compactor

    A hydraulically operated concentric ram trash compactor with hardened cast ductile iron shear teeth compacting against a heavily reinforced door with a quick opening latch. The compaction body and compaction chamber are tubular in shape and form one continuous integral body of structural 3/8' steel plate. The ram is similarly constructed of 1/4' ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Chute Fed Compactors Product line

  • Model 520ESII - Chute Fed Compactors

    An industrial stationary container packer typically installed in multi-story buildings. The machines compact trash received from a trash chute and compact into two cubic yard front or rear load compaction containers. The machines operate automatically by an electric eye, providing unattended operation until the container is full at which time it ...

    By Compactors Incorporated based in Hilton Head Island, SOUTH CAROLINA (USA). from Chute Fed Compactors Product line

  • Flow Cells

    Micronit’s flow cells make excellent tools to sort, count, manipulate and image cells. The dimensions of the microfluidic channels can be in the same range as cell diameters allowing single cell sorting and counting. The superior flatness allows perfect optical imaging, the thin bottom makes it suitable for confocal microscopy. Flow cells ...

    By Micronit based in PV Enschede, NETHERLANDS.

  • Model Sprut-1 - Oil Kimmer System

    Oil skimmer system “Sprut-1” manufactured by the company «ECOservice-NEFTEGAZ» is designed for oil/petroleum products skimming from water surface (capacity – up to 15 m3/h).  Skimmer system «Sprut-1» allows to use interchangeable oil recovery cartridges of oil/brush-, drum- or disk-type. All ...

    By ECOservice-NEFTEGAZ Ltd based in Zhukovsky, RUSSIA. from Oil Recovery Equipment Product line

  • MICRO - Model 8”, 12 - Autoclaves

    AISI304 stainless steel external case and top. Stainless steel chamber and lid, with easy opening. INCOLOY special stainless steel heater element, which provides long life, low corrosion and high temperatures resistance. Manual air purge when starting ('MICRO 8' model). Automatic atmospheric purge ('MED 12' and 'MED 20' models). Safety device to ...

    By JP Selecta S.A. based in Abrera, SPAIN. from Autoclaves Product line

  • Vermeer - Model TG9000 - Tub Grinder

    When you need more power for your high-production grinding operation, the TG9000 is an ideal choice. The TG9000’s PT tech wet clutch with 2:1 gear reduction is controlled by a microprocesser to help protect the engine by limiting torque when necessary. The TG9000 features the largest diameter opening in the industry with an inside tub ...

    By Vermeer based in Pella, IOWA (USA). from Tub Grinders Product line

  • OPEC - Model HV - Low Capacity Oil Skimmer

    The HV System has been developed from the present well established and proven mop systems which are in operation worldwide. The equipment is simple and quick to set up and the installation of the system is also very simple. Mop changes are also very quick and easy to carry out and ready joined continuous loops of mop can easily be threaded between ...

    By Oil Pollution Environmental Control Ltd based in Birstall, Batley, UNITED KINGDOM. from Oil Pollution Recovery Product line

  • LGR - Methane Carbon Isotope Analyser (MCIA)

    LGR’s Methane Carbon Isotope Analyser (MCIA) reports measurements of δ13CH4 and methane mixing ratio directly, continuously and without sample preparation. LGR offers three models to span the entire range of methane levels in landfills, mudlogging studies, biogas reactors, and ambient air.

  • Gradko - Neoprene Tubing

    Chloroprene: Neoprene (also known as chloroprene) is traditional rubber-type industrial tubing, which exhibits greater resistance to cracking than red rubber. It has a reasonable working temperature range and is therefore often used in low temperature environments or for the transport of high temperature liquids.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM. from Tubing Product line

  • ABBRIATA - Model M60 MINI/S - Square Balers

    The ABBRIATA M60 MINI/S square baler is characterized by a chamber with a size of  34x44 cm and a very light weight of approximately 850 kg. It has a pick-up length of 95 cm and a width spanning the entire machine, 149 cm in the transport set-up. The minimum drive power is 20 – 25 CV. This is a special square baler designed for working ...

    By ABBRIATA s.r.l. based in SEZZADIO (AL), ITALY. from Square Balers Product line

  • BRIK - Model MB90 - Mechanical Briquetting Presses

    The mechanical briquetting press develops a compression force of approximately 2000 Kg. per square centimeter to obtain an high quality briquette having a high specific weight and a remarkably reduced volume, without added adhesives.

    By DIPIU srl based in Breganze (VI), ITALY. from Mechanical Briquetting Presses Product line

  • Vulcan - Fifth Wheel Load Cells

    The Vulcan Fifth Wheel Load Cells are designed to fit under Holland, Fontaine, or other fifth wheel plates, replacing the standard risers or slide brackets. The load cells provide immediate weight information without adding substantially to the trailer height or the tractor weight.

    By Vulcan On-Board Scales based in Kent, WASHINGTON (USA). from On-Board Weighing Systems For The Trucking Industry Product line

  • Glass Washers

    Glass washers are essential in assuring the module frontside glass (coverglass) is perfectly clean before laminating. All dust, residue or fingerprint needs to be completely removed before lamination to avoid delamination problems.An even higher level of cleanliness is desired by thin film PV manufacturers as the glass needs to be absolutely clean ...

    By Enlog LLC based in New York, NEW YORK (USA).

  • Electric Mole - Solar Drying Sewage Sludge Plants

    Drying with theElectric Moleis a batch or semi-continuous process that always ensures optimal drying performance, independent of sludge characteristics, weather conditions and energy input.

  • SEDA - MDS6 Container

    The MDS6 is the newest container system of SEDA and provides an All-in-One solution for a mobile de-pollution of End-of-Life Vehicles (ELV) on the cutting edge of technology.The SEDA MDS6 is a roll-off container in which a complete drainage system is integrated. The opened container cover functions like a roof and as rain protection. A static ...

    By SEDA Umwelttechnik GmbH based in Kössen/Tirol, AUSTRIA. from Mobile Systems Product line

  • VersaPak - Protective Packaging

    Made with 100% recycled and 100% biodegradable cellulose tissue. Flexible and stretchable, fits around oddshaped items better than bubble pack or foam. Soft and nonabrasive, won't scratch delicate surfaces. Protects Surfaces: VersaPak weighs up to 30% less than other cellulose products at equal thickness, reducing your freight costs. Aborbent: ...

    By Spilfyter - NPS Corporation based in Green Bay, WISCONSIN (USA). from Versa-Pak Protective Packaging Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you