Waste And Recycling Equipment With Solutions For Waste Water Treatment Applications Available In Minnesota
-
Manufactured by ProMinent GmbHbased in GERMANY
5-200 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 1,000 m3/h. Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Capacity range of up to 8200 l/h. The metering system PolyRex is a double-decker batching station for the processing of liquid and powdered polymers. It consists of the feed and mixer unit and the two stainless steel double-decker tanks. The polymers used are ideally ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Capacity range 120 – 3,800 l/h. Manual polymer batching station Ultromat MT: Perfect metering system for the processing of small quantities of liquid and powdered polymers: extremely robust and ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Measuring ranges 0 – 100 °C. Temperature measurement with DULCOTEST sensors: Can be used for direct temperature measurement or temperature compensation during measurement of pH, fluoride, conductivity, chlorine dioxide or hydrogen ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Measuring range 0.02 – 2 mg/l. Measuring ozone in oxidation and disinfection applications: DULCOTEST sensors offer precise, reliable, application-specific measured values in real ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Extraction rates of up to 8,000 l/h. Polymer batching station Ultromat ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer ...
-
Manufactured by ProMinent GmbHbased in GERMANY
0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h, up to 6 points of injection possible as standard. Flexible solutions for the production and metering of ClO2 adapted to our customer's tasks, requirements and anticipated pricing. ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Extraction rates of up to 2,000 l/h. The ProMinent metering system Ultromat ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.01 – 10 mg/l. Bromine measurement with DULCOTEST sensors: Safe metering in disinfection processes with bromine. The robustness of the sensors makes them suitable for wide range of water ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.01 – 200 mg/l, special measuring range up to 1,000 mg/l. The application-based DULCOTEST sensors for free chlorine deliver precise measured values and a high degree of monitoring and process reliability in any disinfection ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Typical measuring range -1,500...+1,500 mV; wider ranges are possible depending on the measuring device. ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements. ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated pH measuring ranges 0 – 14. pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured ...
-
Manufactured by ProMinent GmbHbased in GERMANY
The controller DULCOMETER D1Cb/D1Cc can be used for control tasks in potable water treatment, waste water treatment and many other areas. Safe, convenient and clear, thanks to the large illuminated graphic display, plain text operating menu and pH sensor ...
-
Manufactured by ProMinent GmbHbased in GERMANY
0 – 120 g/h capacity with storage of up to 60 g of chlorine dioxide for peak metering. Max. flow rate at 0.2 ppm ClO2 metering capacity of 600 m3/h. Chlorine dioxide system for production of a chlorine-free chlorine dioxide solution, especially suitable for multiple points of injection. Bello Zon CDLb produces ClO2 discontinuously using the acid/chlorite process with diluted ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Extraction rates from 400 to 4,000 l/h. The metering system Ultromat ULPa (oscillating system) is ideal for batching flocculation aids for the preparation of a ready-to-use polymer ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Measuring ranges: 0.05 – 10 mg/l and 0.1 – 20 mg/l. Precise measurement of dissolved oxygen with DULCOTEST sensors – very wide range of applications, from the monitoring of water rich in oxygen, including surface water or potable water, to the reliable control of minimal oxygen concentrations when aerating aeration tanks in clarification plants. ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Graduated measuring ranges 0.01 – 10 mg/l. Reliably measure total chlorine with the versatile DULCOTEST sensors for total chlorine. Accurate measured values and a high degree of monitoring and process reliability are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you