Waste and Recycling Equipment in Nova Scotia

  • Simplex - Model MVP Series - Control Panels

    MVP Series simplex panels are digital, programmable panels used to control single pumps and provide alarm functions in onsite septic systems and effluent pumping systems. They include easy-to-use, programmable logic units that incorporate multiple built-in timing and logic functions, including multiple timer intervals to adjust for changing flow ...

    By Orenco Systems Inc. Distributor in NOVA SCOTIA (CANADA). from Controls & Monitoring Products Product line

  • Hurricane - Model HP - Filter Housings

    Harmsco HP Hurricane® filters provide unsurpassed performance. Our unique design separates dense solids prior to cartridge filtration for extended filter life, increased dirt holding capacity and reduced maintenance costs.

    By Harmsco, Inc. Distributor in NOVA SCOTIA (CANADA). from Swing Bolt and HP Hurricane Housings Product line

  • Trapzilla - Model TZ-400 - Supercapacity Grease Trap System

    Thermaco Trapzilla TZ-400 Grease Trap System, rotationally molded polyethylene grease and oil separator for below or above-ground installation, rated at 75 gallons per minute peak flow, 400+ pounds of grease storage capacity, flat grease separation curve, integral portal for access by grease pump truck for grease removal, integral portal for ...

    By Big Dipper—Thermaco Distributor in NOVA SCOTIA (CANADA). from Trapzilla Gease Traps Product line

  • CHINOOK - Industrial Grade Inspection ROV System

    The CHINOOK is an industrial grade inspection ROV with a wide range of capabilities. Explore the depths down to 1,000ft/300m with the standard vehicle or 2,000ft/600m with the deep water version. A true workhorse, the CHINOOK offers a stable platform yet remains compact. With its small profile, the CHINOOK can operate in tight places and is easily ...

    By Seamor Marine Ltd Distributor in Amherst, NOVA SCOTIA (CANADA).

  • Buck LinEair - Model 40 LPM, 230 VAC - Air Sampling Pump

    The BUCK LinEair 40 Sample Pump is a 5 - 35 LPM linear piston air sampling pump with long life motor providing impressive power, compact size and ultra quiet operation and low current drain for a wide range of sampling applications. With the BUCK LinEair 40, you can use filters, PUF samplers, sorbent tubes, charcoal cartridges, cascade impactors, ...

    By A. P. Buck Inc. Distributor in NOVA SCOTIA (CANADA). from Area Sampling Pumps Product line

  • Hesston - Model 1800 - Small Square Balers

    Unlike competitors, our 1800 Series is designed to follow directly behind the tractor. The result is dense, high quality hay - with no flimsy banana-shaped bales that immediately fall apart when they're picked up.

    By Massey Ferguson - a brand by AGCO Corporation Distributor in NOVA SCOTIA (CANADA). from Hesston- Square Balers Product line

  • Hesston - Model 2200 - Large Square Balers

    The 2200 Series Large Square Balers are building on the advances of our popular 2100 Series and taking the technology even further and now include a ProCut™ Rotary Cutter option for a more precise cut with higher capacity, and simplified serviceability.

    By Massey Ferguson - a brand by AGCO Corporation Distributor in NOVA SCOTIA (CANADA). from Hesston- Square Balers Product line

  • Electromedia - Model VI - Heavy Metal Removal

    Electromedia VI is a unique filtration system integrating a special vessel design and a proprietary media. Electromedia VI is a treatment technology developed to ensure that the immediate release of heavy metals to the environment from industry or waste treatment facilities are within acceptable limits.

    By Filtronics, Incorporated Distributor in NOVA SCOTIA (CANADA). from Electromedia Systems Product line

  • Peterson - Model 5900E - Disc Chipper

    The Peterson 5900E disc chipper produces high quality paper chips when used with a Peterson 4800F debarker, or fuel chips as a stand alone fuel wood chipper. The 5900E is powered by a Caterpillar C18, Tier III, 765hp (570kW) engine, which is both fuel efficient and maintenance friendly. The 5900E can be configured with a three or four pocket disc, ...

    By Peterson Pacific Corporation - an Astec Industries Co. Distributor in Dartmouth, NOVA SCOTIA (CANADA). from Disc Chippers Product line

  • P. Henkel - Model UN-BOXX + UN-BOXX max - Containers for Solid Hazardous Materials

    Admissible as packaging in accordance with packing instruction P002 and derived for solid hazardous materials of packaging groups I, II and III. Additional equipment: none

    By P. Henkel GmbH Distributor in Wolfville, NOVA SCOTIA (CANADA). from Large Waste Containers Product line

  • DR Power - Model 11.5 - Manual Start Wood Chipper Shredder

    The 11.5 Chipper Shredder represents a 20% boost in power from our entry model (the 9.5 model). That means it can handle branches up to 4” in diameter, and can shred bigger yard and garden waste too...up to ¾” in diameter. Plus, with double the number of shredding hammers, this model shreds material more finely—to 1/12 its ...

    By DR Power Equipment Distributor in Port Williams, NOVA SCOTIA (CANADA). from DR Power Chipper Shredders Product line

  • VIG Industries - Liquid / Gas Separators

    VIG Industries, Inc. manufactures its own liquid / gas separator. The separator consists of a two piece 316 stainless steel housing, and a Teflon membrane, pre-filtration on input, and 1/8'FNPT on outlet and on drain output. The separator's membrane only allows gasses to pass through it, thus preventing any liquid to pass. The liquid simply falls ...

    By VIG Industries Distributor in NOVA SCOTIA (CANADA). from Other Product line

  • DR Power - Model 9.5 - Manual Start Wood Chipper Shredder

    A great all-purpose chipper and shredder! The DR Wood Chipper with Shredder is lightweight and portable but has the muscle to chip 3' branches and shred up to half-inch thick yard waste and reduce it to a tenth of its original volume. The 9.5 Manual Start model features a 9.5 FPT Briggs & Stratton OHV engine. Comes with built-in handles for ...

    By DR Power Equipment Distributor in Port Williams, NOVA SCOTIA (CANADA). from DR Power Chipper Shredders Product line

  • Shafted Spiral Conveyor

    Shaftless spiral conveyors are the best way to transport sticky and sludgy materials.  Versatile and economical, they are simple and trouble-free.

    By Spiral Engineering Distributor in Truro, NOVA SCOTIA (CANADA).

  • SEAMOR - Model 7F-H-ARM - Hydraulic Articulating Robotic Manipulator

    The SEAMOR 7 Functions Hydraulic Articulating Robotic Manipulator is one of the smallest skid-mounted hydraulic manipulator on the market today. Intuitive programmable position controls and a dedicated gripper camera make the operation of this manipulator easy, regardless of the operator’s skill level. The 7 Functions Hydraulic ARM was ...

    By Seamor Marine Ltd Distributor in Amherst, NOVA SCOTIA (CANADA).

  • Big Dipper - Model FS-1 - Flat Strainer

    The Big Dipper FS-1 Flat Strainer is designed to eliminate the garbage disposal and reduce clogged drains due to coarse solids buildup. The Flat Strainer separates & collects coarse solids such as rice, cole slaw and other food scraps larger than 0.125” / 3.175 mm in diameter. The removable tray allows the customer to empty the collected ...

    By Big Dipper—Thermaco Distributor in NOVA SCOTIA (CANADA). from Solid Strainers Product line

  • Aluminum Vaults

    Our experience in building aluminum vaults and custom architectural space frames means we can confidently recommend the right vault for your application. We have installed aluminium vaults for a wide range of applications including coal storage, bulk raw materials, transportation infrastructure and terminal storage.

    By Stanco Projects Ltd. Distributor in NOVA SCOTIA (CANADA). from Aluminum Covers Product line

  • Claas MARKANT - Square Baler

    Small in stature, powerful in the field. Today, a number of approaches are taken when it comes to straw and hay harvesting. On large farms, there is still a trend towards round bales or large square bales. In contrast, owing to the ease of handling by individual farm workers, a smaller bale size remains the preferred choice on smaller farms.

    By CLAAS Group Distributor in NOVA SCOTIA (CANADA). from CLAAS Square Balers Product line

  • Donaldson Torit - Environmental Control Booth (ECB)

    The Donaldson® Torit® Environmental Control Booth (ECB) is ideal for finishing large and irregularly shaped parts, and is specially designed to remove fine airborne dust in a self-contained environment without interfering with workers movement or visibility.

    By Donaldson Torit Distributor in NOVA SCOTIA (CANADA). from Sanding and Grinding Booth Product line

  • Model 2710D - Horizontal Grinders

    The Peterson 2710D horizontal grinder is designed for operations requiring high production and frequent moves between jobs. At 68,100 pounds (30,900 kg), it is amongst the lightest of our grinder series. The 2710D is powerful, with your choice of a Caterpillar C15 Tier IV, 580 horsepower (433 kW) engine, or an optional C18 Tier II, 765 horsepower ...

    By Peterson Pacific Corporation - an Astec Industries Co. Distributor in Dartmouth, NOVA SCOTIA (CANADA). from Horizontal Grinders Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you