Waste And Recycling Equipment In Moldova
-
PremiumManufactured by Truxor Wetland Equipment ABbased in SWEDEN
This rake has a higher tip, which facilitates the loading of trailers or barges. The rake is made of perforated plating which allows it tocollect smaller particles such as waste, algae and absorbents (oil spill clean-up). ...
-
PremiumManufactured by Truxor Wetland Equipment ABbased in SWEDEN
Doro cutter Wasse is our smallest motor engine reed cutter. Wasse is suitable when moving between different water bodies, and for maintaining small cutting areas. Then cutting depth, knife action in and out and engine start, etc, are all controlled from the driver’s seat. The light construction facilitates transport and mounting. A stone release system protects the knife from damage by ...
-
PremiumManufactured by Truxor Wetland Equipment ABbased in SWEDEN
The Doro pump is a hydraulically operated dredge pump with a screw feeder that breaks off and feeds sediment into the pump intake. The Doro pump is easy to attach and changing to another tool takes only a few minutes. The Doro pump is delivered ready for assembly on the lifting arm. The Doro pump can be delivered with the following accessories: hydraulically operated telescopic extension to ...
-
PremiumManufactured by Truxor Wetland Equipment ABbased in SWEDEN
Pile driver DM 350 is a mast with a winch system for lifting and mounting plastic, wooden and metal piles and poles. It is equipped with a Hycon hydraulic hammer which is used in combination with the Pile driver DM 350 and generates very powerful vibrations, resulting in effective piling in ...
-
PremiumManufactured by Truxor Wetland Equipment ABbased in SWEDEN
The reed rake is used for the collection and transportation of plants after reed cutting. It has foldable side sections. The rake can be supplemented with strainer plates for collection of waste, algae and absorbents (oil spill ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
CCS120 is the analog sensor for standard measurement of total chlorine. It delivers reliable values even if fluctuations in flow or conductivity occur and allows control of the disinfection loop so that the water is free of germs. At the same time, the sensor is designed for long calibration and service intervals reducing your maintenance ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 20m. The Prosonic FMU44 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The genuine loop-powered flowmeter for minimized cost of ownership. The robust Promass E has a long standing reputation as a cost-efficient solution accurately measuring liquids and gases in a wide range of standard applications in the chemical industry. With genuine loop-powered technology, Proline E 200 enables cost-effective and seamless integration into existing infrastructures. The flowmeter ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m. The Prosonic FMU42 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
For standard hygienic and aseptic applications in the Food & Beverages and Life Sciences industries. This iTHERM thermometer has been designed to meet the basic requirements of the Food & Beverages and Life Sciences industries at the best price. It offers a variety of versions within a clearly segmented standard product. The result: Time and cost savings by simple and fast product ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens optical oxygen sensor for hygienic applications in Life Sciences, Pharma and Food. The Memosens COS81D optical oxygen sensor is available in 120 ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Self-cleaning crossflow filter for pressurized pipe sampling. Stamoclean CAT411 provides bacteria-free micro filtration of samples from pressure pipes. Its self-cleaning crossflow filter avoids filter blocking, thus increasing your process safety. Thanks to a minimized dead volume, it reflects changes of your process promptly and shortens the response time of your downstream measuring devices. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens CPS76D is the hygienic and sterile expert for simultaneous pH and ORP measurement offering a better process control and increased quality. The sensor is autoclavable and biocompatible assuring highest safety of your products. Thanks to Memosens digital technology, CPS76D combines maximum process and data integrity with simple operation. It resists corrosion and moisture, enables lab ...
-
Manufactured by TAN LLCbased in UKRAINE
Tub evaporator (toaster) is intended for moist-and-heat treatment of degreased residue of oil-plants raw stuff (cake) aiming at removal of solvent residue from it as well as solvent residue itself. Tub evaporator (toaster) is an integral part of the equipment for extraction workshops producing plant oils. Tub evaporator (toaster) is a vertical column consisting of one or several sections (pans), ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The device for accurate, reliable biogas measurement with loop-powered technology. Prosonic Flow B 200 is the specialist for accurate and reliable measurement of wet biogas and digester gas,even under fluctuating process conditions. With its unique integrated real-time methane fraction analysis, Prosonic Flow B 200 enables continuous measurement and monitoring of gas flow as well as gas quality. ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Colorimetric system for monitoring of drinking water, mineral water or raw water for food production. Liquiline System CA80NO offers precise, regulation-compliant online measurement of nitrite. It supports you in meeting the specified limits in drinking water, mineral water or food production. Like all Liquiline System analyzers, it enables plug & play of up to four Memosens sensors – ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The Liquitrend QMW43 is developed for the food and beverage industry to help customers to ensure product safety, improve quality and increase the availability of installations. Base your decisions on the unique and reliable measurement of buildup thickness and conductivity via the combination of conductive and capacitive measuring ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens CPS16D is the digital allrounder for simultaneous pH and ORP measurement offering better process control and increased quality. The sensor features a dirt-repellent PTFE diaphragm for process and environment applications with long-term stable conditions. Thanks to Memosens digital technology, CPS16D combines maximum process and data integrity with simple operation. It resists corrosion ...
-
Manufactured by August ir Ko UABbased in LITHUANIA
Large AT plants (75 and 10000+) treat from 11.3 m³ or more of waste water per day, when the water is from major sports, leisure, residential complexes;housing estates; large companies;towns, villages and cities with large and small populations ranging from several hundred to five thousand or more inhabitants. The size of "August" waste water treatment plants is not limited, if necessary ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Colorimetric system for online monitoring of water and wastewater treatment. Liquiline System CA80AM offers high-precision ammonium measurement in all critical control points. As member of the Liquiline platform, it enables plug & play and easy upgrade to a measuring station - minimizing the installation effort. Automatic calibration and cleaning as well as the low consumption of reagents ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you