Waste & Recycling Equipment in South Dakota

61 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Waste & Recycling ×

  • In: USA ×

  • In: South Dakota ×

Arm-Matic - Aluminum Flip Arm Tarping System

by Shur-Co, LLC     based in Yankton, SOUTH DAKOTA (USA)

Whether you're hauling gravel, coal, scrap metal or rock, you need a tarp system that is as dependable as the rest of your equipment. Shur-Co.® understands that downtime costs you money, and there is no worse situation than to be down because of a failed tarp system.

Model 317G - Compact Track Loader

by John Deere     Distributor in SOUTH DAKOTA (USA)

With superior pushing power and breakout force, the 317G CTL delivers the tractive effort and leverage to dig-in where other machines just spin. The optional 15.8-inch-wide track is just 4.5 psi, so you can work in soft underfoot conditions and increase side-slope stability. The redesigned vertical-lift boom rises up to 10 ft. 1 in. and delivers ...

Model L330 - Large Square Balers

by John Deere - Agriculture     Distributor in SOUTH DAKOTA (USA)

Our new L300 Series Balers are designed to efficiently pick up crop and deliver consistent, well-shaped bales every time. The result is quality feed and tons on the truck — which results in money in your pocket.

Model L340 - Large Square Balers

by John Deere - Agriculture     Distributor in SOUTH DAKOTA (USA)

Our new L300 Series Balers are designed to efficiently pick up crop and deliver consistent, well-shaped bales every time. The result is quality feed and tons on the truck — which results in money in your pocket.

Model Z577 - Self Loading Bale Wrapper

by METAL-FACH Sp. z o. o     Distributor in Huron, SOUTH DAKOTA (USA)

The self loading Z577 bale wrapper has a side loader which ensures quick and effective loading, because the collection and wrapping happens while driving to the next bale or to the stacking site. The machine is equipped with a film cutter - grabber, which limits the involvement of the user to loading a new roll of film. After wrapping the bale can ...

Model BFBC - Skid Loader Buckets

by GrabTec     Office in Worthing, SOUTH DAKOTA (USA)

Built for machines with the universal skid loader quick attach. This bucket's larger capacity is designed to allow todays larger Skid Steers, Compact Utility Tractors, Compact Wheel Loaders, and Telehandlers take advantage of their heavier lift capabilities.

ErtelAlsop - Model EA 800 & EA 1000 - Recessed Chamber Filter Presses System

by ErtelAlsop     Distributor in SOUTH DAKOTA (USA)

EA 800 & 1000 Filter Presses Supplied with lightweight, economical polypropylene plates, these filters are ideal for processes that require 10-50 cubic feet of solids handling. With gasketed plates standard, these heavy-duty presses are exceptionally suited for all applications where leak free processing is required.

Model 250bu - Creep Feeder

by Ranchers Livestock Equipment     based in Gregory, SOUTH DAKOTA (USA)

Heavy Duty Creep Panels and Axle ·  Adjustable Creep Bar.  Winch up panels for 250 models.  Ground Level Lid Opening  - no need to crawl on feeder. One 8000lb Jack - no additional stands or jacks needed.  Fill With Panels Up.  Rounded Corners for Safety.  11” Trough and 24” Eave.  Full ...

Model 130bu - Creep Feeder

by Ranchers Livestock Equipment     based in Gregory, SOUTH DAKOTA (USA)

Ground opening lid. 16” tires. Heavy duty frame for extended life. One 8000lb jack-no additional stands or jacks needed. 11” trough and 20” Eave.   3 height adjustment settings on creep panels. All Seams Welded

Model PSC - Cylindrical Separators

by PS International Incorporated (PSI)     based in Sioux Falls, SOUTH DAKOTA (USA)

These oil-water separators include the same corrugated coalescing plate assembly as the PS Models and also include a highly efficient polypropylene media final polishing coalescer that is designed to remove free oil droplets down to 20 micron in size and produce a free oil and grease effluent quality of 10 ppm or less.  Cylindrical ...

Model PS - Cylindrical Separators

by PS International Incorporated (PSI)     based in Sioux Falls, SOUTH DAKOTA (USA)

These oil-water separators include an enhanced arrangement of corrugated coalescing plates that enable the separator to produce a free oil and grease effluent quality of 15 ppm or less.  Cylindrical design is for direct burial or can also be saddle mounted for above grade applications.

OverBuilt - Car Crushers

by Overbuilt Inc     based in Huron, SOUTH DAKOTA (USA)

Built standard with its 10 foot opening the OverBuilt Car Crusher has the highest opening on the market. In addition, the remarkable 159 tons of crushing power allows the OverBuilt Car Crusher to handle as many as six cars at a time. It will also crush trucks, busses, and large farm equipment with ease.With an OverBuilt Crusher there is no setup ...

DULCOTEST - Sensors for Peracetic Acid

by ProMinent Group - ProMinent GmbH     Distributor in SOUTH DAKOTA (USA)

Graduated measuring ranges 1 – 2,000 mg/l. Measurement of peracetic acid concentration with DULCOTEST sensors: Precise and reliable for disinfection in safety-sensitive applications in the food, pharmaceutical and medical industries. Can also be used in waste water treatment.

Model Z552 - Stationary Wrapper

by METAL-FACH Sp. z o. o     Distributor in Huron, SOUTH DAKOTA (USA)

Z552 stationary wrapper is intended to be used as stationary equipment. It is connected to the tractor using a 3 point mounting system. It is powered by the hydraulic motor of the tractor pump. It is equipped with a 500 mm film pre-stretcher. Metal-Fach’s long experience in bale wrapper production guarantees a long and break free life of the ...

Alkota - Power Parts Washers

by Alkota Cleaning Systems, Inc.     based in Alcester, SOUTH DAKOTA (USA)

With an Alkota Parts Washer, you’ll save time and money by cleaning parts in just minutes. It’s as easy as operating a microwave oven — put your parts in the washer, close the door, set the timer. Come back minutes later to sparkling, oil free parts. Our washers operate with hot water and biodegradable detergents. This eliminates ...

Model EA 102 & EA 203 Series - Laboratory Filter Press

by ErtelAlsop     Distributor in SOUTH DAKOTA (USA)

EA 102 & 203 Laboratory Filter Presses are among the most efficient and cost effective means of liquid/solid separation through pressure filtration. EA Lab presses provide a simple reliable method of high compaction pressure to compress and dewater solids concentration. This provides clearer filtrate solutions than systems that only remove free ...

ErtelAlsop - Model EA 470 & EA 630 - Recessed Chmaber Filter Presses

by ErtelAlsop     Distributor in SOUTH DAKOTA (USA)

EA 470 & 630 Filter Presses For use in a wide variety of applications, ErtelAlsop offers Model EA 470 and 630 Series Filter Presses. Supplied with lightweight, economical polypropylene plates, these filters are ideal for processes that require 0.5 to 12 cubic feet of solids handling. With gasketed plates standard, these heavy-duty presses are ...

Tube & Well Systems

by Sukup Manufacturing Co.     Office in Watertown, SOUTH DAKOTA (USA)

Sukup Tube and Well Unloading Systems are economical and easy to service. 6”, 8”, and 10” angle ring or sleeve mount systems available. The Sukup carry-in sweep features a galvanized backboard and can be moved from one bin to another in no time.

Model 998 - High Output Square Wrapper

by McHale Engineering Limited     Distributor in Huron, SOUTH DAKOTA (USA)

The McHale 998 square bale wrapper is the versatile high output solution for wrapping square bales. It is capable of wrapping 80 - 100 bales per hour. Common sense design, quality components and precision engineering make the 998 square bale wrapper the trusted choice for contractors and farmers who demand high output and consistent performance in ...

ErtelAlsop - Model EA 1200 & EA 1500 - Recessed Chamber Filter Presses

by ErtelAlsop     Distributor in SOUTH DAKOTA (USA)

ErtelAlsop is a US Based filter press manufacturer. Our EA Series sludge dewatering presses are perfect for municipal sludge and sewage sludge treatment. Supplied with lightweight, economical polypropylene plates, these chamber filter presses are ideal for processes that require 50-300 cubic feet of solids handling. With gasketed plates standard, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you