Pyrolytic And Thermal Cleaning Equipment For Waste And Recycling Available In Guam
-
Manufactured by FSX Equipment Inc.based in USA
9" Extension Ring NOW INCLUDED with Base TrapBurner. Two DPF Capacity Expansion FSX Filter Rack is an add-on accessory that allows you to perform a Stage 2 Thermal cleaning of two (2) standard size DPFs (17inches or shorter) at the same ...
-
Manufactured by GKD - Gebr. Kufferath AGbased in GERMANY
Wire meshes are produced on looms as mesh rolls. The metal meshes are stored on rolls. All further processing steps are then performed on the basis of this roll material. The mesh roll is used as a semi-finished product in applications where it is logistically undesirable to supply the material as strips or cut-to-size pieces due to the many different dimensional requirements. Depending on the ...
-
Manufactured by Lytzen A/Sbased in DENMARK
In a Lytzen pyrolysis oven plastic residues in nozzles or similar tools are removed by means of a pyrolysis process. Adjustable burn-chamber: The Lytzen pyrolysis oven consists of a burn-off chamber and an afterburner unit. The top part of the burn-off chamber opens pneumatically, and inside the chamber a grating is fitted for the placing of nozzles/tools. The chamber is electrically heated for a ...
-
Manufactured by FSX Equipment Inc.based in USA
The FSX TrapTong is probably one of most labor-saving devices ever created to assist in Thermal Cleaning Diesel Particulate ...
-
Manufactured by Accurate Thermal Systems LLCbased in USA
Accurate Thermal Systems manufactures Fluidized temperature baths to meet a wide range of applications where a stable and uniform temperature environment is required. They have been used for decades to remove organic material from extrusion tooling and any other metal surface or parts, shape set medical devices, calibration, testing various sensors and systems, heat treatment of metals as well as ...
-
based in AUSTRIA
The AutoKAT combines the advantages of regenerative thermal oxidation with those of catalytic oxidation. The AutoKAT is a very cost-effective alternative for well understood waste streams. Existing RTO systems can be upgraded to an ...
-
Manufactured by Spirax Sarco Inc.based in USA
The MTI10 Insertion and MTL10 Inline Thermal Mass Flowmeters measure clean, dry gas and air applications over a wide range of ...
-
Manufactured by SCHWING Technologies GmbHbased in GERMANY
SCHWING offers different abrasive blasting media for surface treatment via abrasive blasting; they can be selected according to the surface condition and the desired final result. Depending on the need, abrasive blasting media with additional hardening effect can also be ...
-
Manufactured by Testa GmbHbased in GERMANY
The stationary Flame-Ionisation-Detector (FID) iFiD RACK is designed for stack monitoring, process control and also for VOC measurement. The whole gaspath is heated to 300°C and so we can speak from a ...
-
Manufactured by Espec North America, Inc.based in USA
The new BTZ-4200 takes advantage of compact, modern scroll compressors to bring fast temperature cycling to small form factor. The chamber can cycle temperatures at rates up to 15°C/minute without requiring cooling water or liquid ...
-
Manufactured by VN-Pumpen GmbH & Co. KGbased in GERMANY
In thermal oil heater transfer plants (acc. to DIN 4754) for circulating thermal oils with saturation pressure ≤1 bar. Thermal oils clean, non-aggressive, which do not contain any solid constituents. Themal oil pump is used mainly in chemical industry, rubber- and plastic industry, food industry, paper mills and industrial laundry plants. The pump is espacially designed for the pumping of ...
-
Manufactured by Kilburn Engineering Ltd.based in INDIA
KILBURN manufactures paddle dryer in technical collaboration with M/s. Nara Machinery, Japan. Paddle dryer is conduction type dryer that processes granular and powdery material by bringing them into direct contact with revolving cuniform shaped hollow paddles without using gas as a heating ...
-
Manufactured by Electronbased in NETHERLANDS
One of today’s most widely accepted air pollution control technologies across the industry is a Regenerative Thermal Oxidizer, commonly referred to as an RTO. They are very versatile and extremely efficient – thermal efficiency can reach 95-98%. They are regularly used for abating solvent fumes, odours, etc. for a wide range of industries. Regenerative Thermal Oxidizers are ideal in a ...
-
Manufactured by Falcon Refrigeration Industrybased in INDIA
Falcon Refrigeration Industry is one of the leading cold room door manufacturers in Pune. We are your reliable one-stop solution for custom refrigerated doors. Our cold storage doors are economical and energy-efficient. In addition, it is equipped with the latest technology and design to meet the needs of the refrigeration warehouse industry. ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
Spray Towers are used for low efficiency, low capital cost scrubbing of large particulates and highly soluble gaseous contaminants. Spray towers are especially effective for applications where the inlet contaminants hydrolyse to form difficult to handle solids, or where more efficient scrubbing is not desired for budget or technical ...
-
Manufactured by Testa GmbHbased in GERMANY
The stationary Flame-Ionisation-Detector (FID) iFiD Wall is made for rough conditions and field installations. This unit measures the Total Hydrocarbon concentration especially in heavy industrial environment or freeair installations with small weatherprotection. The stainless steelhousing with a protection class IP65 gives the analyser a strong shelter all year ...
-
Manufactured by Swiss QuantEnergo SAbased in SWITZERLAND
Plasma HyperJet is intended for use in the open spaces and in field conditions. The method of thermo-abrasive cleaning of the steel surface before its coating is the most effective technique currently in use. ...
-
Manufactured by SCHWING Technologies GmbHbased in GERMANY
High-value components can be cleaned very well of remaining inorganic residual contamination via ultrasound. The advantage of this technology is that it can also reach areas difficult to access making the dismantling of the parts often unnecessary. For this reason the after-treatment with ultrasound is the right choice for small parts or sensitive ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
Thermal oxidation is a well-established method of treatment of contaminated process gases to meet IED (2010/75/EU) emission ...
-
Manufactured by CleaNsep Systems Pvt. Ltd.based in INDIA
Cleaning-In-Place (CIP) is systems used for automatic cleaning and disinfecting without major assembly and disassembly work in food, dairy, pharma & biotech ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you