Pyrolytic And Thermal Cleaning Equipment For Waste And Recycling Available In Ohio
-
Manufactured by Metal-Matic Incbased in USA
Metal-Matic, Inc. carbon steel hydraulic fluid line tubing offers many characteristics that are far superior to those defined in industry standards. By way of advanced chemistries and caster practices, coupled with our distinctive processing, hydraulic fluid line tubing provides uniform grain size, excellent concentricity and outstanding ductility and formability. We deploy many final thermal ...
-
Manufactured by GKD - Gebr. Kufferath AGbased in GERMANY
Mesh segments are produced as semi-finished products for further processing in filters or filter systems. The mesh segments can be individually manufactured with our plasma and laser cutting systems. These allow complicated geometries to be cut with high precision. At the same time, the segments get secured edges. The systems can produce segments in dimensions of up to 5 * 2 m. Larger segment ...
-
Manufactured by Epcon Industrial Systems, LPbased in USA
Thermal Deoiling is a process that uses indirectly heated dry air to clean parts contaminated with oils or lubricants. No water, solvents or other chemicals are used. The basic thermal process is well known, having been used for many years in industrial operations that require clean, dry parts such as brazing, coating, soldering and ...
-
Manufactured by Terragon Environmental Technologies Inc.based in CANADA
Maximal recovery of resources for habitats: In many communities, the cost of water and electricity is high, and the uncontrolled discharge and disposal of waste has the potential of endangering the surrounding environment. This situation can exist in marine platforms, northern communities, hotels, mining camps, arctic stations, island communities, research stations, and ...
-
Manufactured by Fan Azma Gostar Company (FG)based in IRAN
Equipped with shaded-pole motor technology (shaded-pole motor), Heat-resistant impellers made of hot-rolled aluminum steel, stainless steel or die-cast aluminum Temperature range from 120 to 500 degrees Celsius (pyrolytic self-cleaning) ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Single and multi-lane strand furnaces: Carbolite Gero can supply units to process a single strand. However, for cost efficient production furnaces with up to eight lanes are offered as standard and additional lanes can be added (up to a maximum of 22). The furnace length is determined by the throughput requirement. The strand passes through Inconel or ceramic tubes and, where required, under the ...
-
Manufactured by Carrier Vibrating Equipment, Inc. / Carrier Europe S.C.Abased in BELGIUM
Carrier vibrating fluid bed coolers are designed to cool a variety of products at a wide variation of feed ...
-
Manufactured by Shengdong Technology Co., Ltd.based in CHINA
This product is a new deoxidant made by condensation reaction of hydroxylamine and carbonyl compound, which is applied widely to boiler water as deoxidant and passivant and is commonly used medicament for wet method protection of boiler. It can also be used as the raw material for organic synthesis, medicine, pesticide, coloring agent and organic silicone coupling agent, as well as analytical ...
-
Manufactured by Henan Konli Environmental Sci-Tech Co., Ltdbased in CHINA
Detonation cleaning system is a new technology to remove soot on heating surface of ...
-
Manufactured by Steelco S.p.A.based in ITALY
LC70 has been developed for any Health Care application where large items are required to be cleaned and thermal disinfected. It can treat theatre transport and storage trolleys, sterile containers and operating ...
-
Manufactured by Nexterra Systems Corp.based in CANADA
Nexterra's low pressure (up to 150 psig) steam and hot water generation systems provide clean, reliable thermal energy for District Energy Plants or Industrial Process Plants where steam power generation is not ...
-
Manufactured by Questor Technology Inc.based in CANADA
Questor is a leading provider of 99.99% efficient, safe, reliable and regulatory compliant patented waste gas combustion. This combustion occurs in stacks referred to as incinerators, thermal oxidizers and combustors. We specialize in the clean combustion of waste gases, methane, Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAPs) and carcinogenic compounds, such as Benzene, ...
-
Manufactured by Conco Services Corporationbased in USA
Through a water flushing and rotary drilling action, the Conco HydroDrilling system is the fastest and most effective way to remove difficult deposits from the inside of heat exchanger tubes, chemical reactors, condensers, re-boilers and absorbers. The revolutionary HydroDrill™ high-torque cleaning system removes obstructions from any type of tube ranging from 3/8” to 6” in ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The Olfasense VOC emission test chamber EK250B allows characterization of the emissions of volatile organic compounds under precise test conditions, and is fully compliant with the requirements of ISO 16000-9, ISO 16516 and EN 717-1. Our chambers have been developed in close cooperation with experts from industry and research, and can be used for a broad analytical performance spectrum via 4 ...
-
Manufactured by Esbelt, S.A.based in SPAIN
In the green leaf threshing and primary processing, tobacco leaves come into direct contact with the conveyor belts. One of the tobacco industry requirements is that the belts must be free from nitrogen, sulphur and halogens when subjected to combustion. Esbelt tobacco belts pass the Pyrolysis Test and are free from toxic ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
V-tex is an outstanding, patented technology for gas scrubbing and stripping applications. The V-tex® scrubber is especially suited to applications where traditional packed towers cannot be used because they would foul due to solids in the gas and/or liquid streams clogging up the packing media. And the V-tex® provides users with a highly efficient scrubber unit which is more compact than ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
Tray towers are used for cleaning gas flows which are contaminated with both particulate and soluble noxious gases. Their unique design enables them to capture particulate >2 micron as well as soluble gases to high efficiencies of removal. ERG designs and manufactures each tray scrubber to meet your specific application and detailed ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
Venturi scrubbers are used for solids removal from flue gases and process vents, providing efficient removal of particulates as small as 0.2 µm (micron). The scrubbers are suitable for mechanically generated (large) and chemically generated (small) particulates with typical particulate size in the range 0.5 to 10 µm. Material loading, density, and solubility are all factored into ...
-
Manufactured by ERG (Air Pollution Control) Ltdbased in UNITED KINGDOM
Quench vessels are used to rapidly cool hot flue gas, process gas or syngas. ERG has extensive experience of high temperature quenching as the first stage of a wet gas cleaning package, see examples of typical applications here. ...
-
Manufactured by TBH GmbHbased in GERMANY
TBH developed a special system design for using systems of the DF series in dental/ medical/ aesthetic fields of application in order to meet the high demand on hygiene and cleanability. Filter and extraction systems protect patients, medical staff and doctors from potentially infectious air, i.e. air contaminated with germs, bacteria/ viruses and particles or aerosols. In order to keep as few ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you