Only show results in Virginia? Ok

Pyrolytic and Thermal Cleaning equipment for Waste and Recycling

  • MODEL 50SD GAS THERMAL MASS FLO-METER

    McMillan Model 50SD Thermal Mass FLO-METERS are capable of measuring virtually any clean, dry gas as low as 0-20 sccm or as high as 0-100 Lpm! Repeatable results are achieved using a patented thermal mass flow sensor design. This proven design minimizes zero drift while maintaining fast response and linear outputs. Because of the compact size and ...

    By McMillan Company based in Georgetown, TEXAS (USA).

  • Lytzen - Pyrolysis Cleaning Oven

    In a Lytzen pyrolysis oven plastic residues in nozzels or similar tools, used in the plastic processing industry, are removed by means of a pyrolysis process. The Lytzen pyrolysis oven consist of a burn-off chamber and an afterburner unit.

    By LYTZEN A/S based in Soeborg, DENMARK.

  • AMBF - Model NY Series - Nylon 6,6 Membrane Cartridges

    AMBF’s Nylon 6,6 cartridges offer a wide array of micron ratings from .03 to 20 microns. All Nylon 6,6 are produced in-house on the most modern equipment available. Complete in-house testing guarantees a superior and consistent product. We offer all end cap configurations to offer you the proper cartridge to fit your applications and ...

    By American Melt Blown & Filtration based in Rensselaer, INDIANA (USA). from Nylon 6,6 Membrane Cartridges Product line

  • KRAL - Model K/M/C - Screw Pumps with Magnetic Coupling

    Pumps with magnetic coupling where special requirements are placed on pumps and sealing systems.

    By KRAL AG based in Lustenau, AUSTRIA. from Screw Pumps with Magnetic Coupling Product line

  • Model VisionXP+ - Reflow Soldering System

    Energy-efficient system ensures reduced operating costs. The VisionXP+ is our best-in-class convection reflow soldering system which is clearly in line with the trend towards dealing with natural resources in an environmentally sound fashion. The industry sector will have to do some rethinking – and machinery manufacturing won’t be ...

    By Rehm Thermal Systems GmbH based in Blaubeuren-Seissen, GERMANY. from Reflow Soldering System Product line

  • Olfasense - Model EK250B - VOC Emissions Test Chamber

    The Olfasense VOC emission test chamber EK250B allows characterization of the emissions of volatile organic compounds under precise test conditions, and is fully compliant with the requirements of ISO 16000-9, ISO 16516 and EN 717-1.Our chambers have been developed in close cooperation with experts from industry and research, and can be used for a ...

    By Olfasense Group based in Amsterdam, NETHERLANDS. from VOC Emissions Test Chamber Product line

  • Stuart - Model CB302 & SB302 - Hotplate Stirrers

    Stylish and economical, general purpose stirrer hotplates designed with safety as well as performance in mind. The “Hot” warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains.

    By Keison International Ltd. based in Essex, UNITED KINGDOM. from Hotplate Stirrers Product line

  • Global Filter - Hydrophilic Polysulfone Membrane for Water & Aqueous Solutions

    Hydrophilic Polysulfone Membrane Cartridges are an exceptional choice for ultra-high purity water and aqueous fluid applications. GHPS series cartridges offer extremely high flowrates and service-life while filtering to 0.05-1.2µm. GHPS cartridges are constructed using high purity polypropylene support materials and hardware and assembled ...

    By Global Filter, LLC based in Cedar Rapids, IOWA (USA). from Hydrophilic Polysulfone Membrane for Water & Aqueous Solutions Product line

  • Fired Packaged Water Tube Boilers

    RENTECH BOILER SYSTEMS is the industry leader in direct fired boilers. RENTECH offers designs based on application and operating conditions, including a full range of custom-designed direct fired packaged boiler systems to meet the most demanding project requirements.

    By Rentech Boiler Systems, Inc. based in Abilene, TEXAS (USA).

  • Sigma - Model X-Series - High Performance Plates

    The X-series mainly demonstrates it’s advantages where the temperature differences between the cold and the hot products are very tight. The small material thickness of the X-series heat transfer plates reduces the heat transfer resistance additionally and leads to extremely high over all heat transfer coefficients.

    By API Schmidt-Bretten GmbH & Co. KG based in Bretten, GERMANY. from High Performance Plates Product line

  • Viton FreeFlow - Model Z100 - Processing Aid for Polyolefins

    Viton FreeFlow Z100 is a processing aid for polyolefins that eliminates melt fracture, lowers extrusion pressure, reduces amperage and torque, and reduces die buildup. Viton FreeFlow Z100 combines an improved rheology fluoroelastomer with a surface active agent to provide a more highly efficient process aid blend than previously available. As a ...

    By Tomark Industries, Inc. based in Glen Mills, PENNSYLVANIA (USA). from Processing Aid for Polyolefins Product line

  • Laird - Model VS-1000 - Vertical Stationary Hydrostatic Mixer

    1000 CUFT Mixing Chamber (61/2 FT Side Wall). %' Floor Thickness. Stainless Steel Liner on Floor (3mm). Two Vertical Augers with Stainless Steel on the Perimeter Stainless Steel Cap (3mm) on the First Three Feet of the Leading Edge. Complete Hydrostatic System to Drive the Augers Open/Close the Discharge Door. Plus One Controller.

    By Laird Manufacturing based in Merced, CALIFORNIA (USA). from Vertical Stationary Hydrostatic Mixer Product line

  • Model PL - Touchclave System

    LTE Touchclave Systems Autoclaves provide medium to large capacity sterilization solutions for CSSD/HSDU. Our range of porous load rectangular chambered sterilizers are available in six standard sizes and 326 to 1052 litres. Larger sized units up to 10,000 litres can also be provided. All models can be configured for either single entry or ...

    By LTE Scientific Ltd based in Greenfield, UNITED KINGDOM. from Touchclave System Product line

  • Gliding Arc Plasma Research System

    This system can produce synthesis gas from gaseous (natural gas, propane, butane) and liquid (gasoline, diesel) fuels in partial oxidation and steam reforming modes of operation. It also can be used for CO2 sequestration and cleaning of gaseous products of biomass, coal, and municipal wastes gasification.

    By Advanced Plasma Solutions based in Malvern, PENNSYLVANIA (USA).

  • Landa Cleaning Detergents

    Get faster and superior results using our Landa Cleaning Detergentscomplete, new line of environmentally friendly, phosphate-free detergents.

    By Landa Kärcher Group based in Camas, WASHINGTON (USA).

  • Condensation

    Condensation is a proven method of recovering pollutants or solvents in the waste gas as resources and for hence saving raw materials, energy and costs. Standardkessel Baumgarte possesses the necessary know-how for developing an optimum concept speciallly orientated to your requirements, for emission reduction, recovery and waste gas conditioning. ...

    By Standardkessel Baumgarte GmbH based in Duisburg, GERMANY. from Condensation Product line

  • Model 2800 MAX PSI / 2.3 MAX GPM - 020593 - Pressure Washer

    Enjoy a cleaner driveway, siding and deck with this Briggs & Stratton 2800 Max PSI* pressure washer. It features a powerful Briggs & Stratton 875EX Series™ engine with ReadyStart®, so there’s no need to prime or choke. The heavy duty, all-steel base is more durable and makes hose connections easier. Plus, the unique ...

    By Briggs & Stratton Corporation based in Wauwatosa, WISCONSIN (USA). from Pressure Washer Product line

  • Inert Gas Dryers

    In the presence of an adequate amount of air, which is the normal case under atmospheric conditions, an explosive mixture can be formed in the absence of combustible gases or dust. If the concentration of gases or dust cannot be or is not dropped to a safe level, an inert gas, such as nitrogen or carbon dioxide can be added in large quantities to ...

    By Bernd M√ľnstermann GmbH & Co.KG based in Telgte, GERMANY. from Inert Gas Dryers Product line

  • Oil Sludge Processing Hydrocarbon Separation & Recovery System

    ART provides waste treatment solutions to the petroleum, and petrochemical industries to treat and manage a multitude of hazardous and non-hazardous refinery waste streams. ART utilizes a combination of physical separation proven technologies for processing of Tank Bottom Sludges, Refinery Wastes, Hydrocarbon Residues, Hydrocarbon (oil) recovery, ...

    By ART Engineering, L.L.C. (ART) based in Land O Lakes, FLORIDA (USA).

  • Giant - Model SF-3000 - Portable Fume Collector

    The GIANT portable filtering unit provided by AXIOM is designed as a solution to dust and fume collection needs that arise during metalworking, polishing, welding, grinding and various other applications. With two spun bond polyester filters, an outer powder coated steel housing, fan impeller, 2.2 kW motor, thermal overload motor stator, ...

    By Axiom Air Products Inc. based in Schaumburg, ILLINOIS (USA). from Portable Fume Collector Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you