Recycling Equipment Equipment For Waste And Recycling In Africa
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without problem. ENERPAT four shaft shredders are available in ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
The BPS is suitable within the range of the waste paper assortment both for the separation from paper and cardboard boxes and for the Finesorting of the problematic disturbing of portions in the waste paper, here particularly also for the improvement of the Deinking ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
Principle: The separator classifies the input material in a light weight and a heavy weight fraction. The input material has to be free of fines and oversizes as far as possible. The input material has to be free- owing and may not agglutinate. For a good separation results, the ratio of the smallest to the largest particle should be 1: ...
-
Manufactured by Idrobenne s.r.l.based in ITALY
Compact and versatile polyp grab, suitable for handling scrap metal, urban waste and loose ...
-
Manufactured by Biozonebased in KENYA
The BZM-model sewage recycling plants uses the Sequential Batch Reactor process to provide effective treatment of sewage water in various applications in scale from residential to large communities. The BZM-model sewage recycling process provides for full Carbon and Nitrogen removal and produces high quality effluent that is odor free and suitable for re-use including irrigation and toilet ...
-
Manufactured by Baioni Crushing Plants Spabased in ITALY
Vibrating feeders, mod. AV, are used for secondary feeding of gravely alluvial or pre-crushed material. Mainly made up of a plate chute hung over the fixed casing by ant vibrating rubbers and moved by two eccentric motor-vibrators. The continuous feeding and the constant capacity allow the machine that follows to work always at full rating. The feeding quantity can be adjusted by a circular ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
SMW Waste screen is a potent, compact screen segment unit for efficient separation of MSW into two fractions. The rotor elements consist of rugged steel tubes equipped with pentagonal screen discs. SMW Rotor Screens are flexibly adjustable to the individual separating behaviour and transport characteristics of the input ...
-
Manufactured by NEPCO21 Co., Ltd.based in SOUTH KOREA
Model name: NE-1200. Capacity: 500~580kg/h. Components: Pulverizer, malting machine all-in-one (separable types of machines are available). Power: 100kw. Size: 4m x 2m x ...
-
Manufactured by Akfen Muhendislik & Engineering Cobased in TURKEY
Waste engine oil recovery plant, Waste mine oil recovery plant For detailed information please contact our company engineers for more detailed information. Waste lube Oils; It is recycled in 2 main ways as refining and regeneration and divided into 3 main categories. Refining; Refining of waste oils and converting them into base oils or petroleum products in accordance with national and ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
The BS-series are the most sold Ballistic Separators for light packaging and household waste. A wide range of machine-types available to to all application of the ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
Perforators of the series are excellently suited for material feeding per front loader, as well as placing the machine over the conveyor belt charging the bale press. The bottles are punctured and pressed at. Bottles rolling no more on the belt considerably facilitates buffering and transport of the material. The conveyor belt is used more efficiently for a much faster feeding of the bale ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Single and multi-lane strand furnaces: Carbolite Gero can supply units to process a single strand. However, for cost efficient production furnaces with up to eight lanes are offered as standard and additional lanes can be added (up to a maximum of 22). The furnace length is determined by the throughput requirement. The strand passes through Inconel or ceramic tubes and, where required, under the ...
-
Manufactured by Redoma Recycling ABbased in SWEDEN
For recovery of fine metal parts from insulation, REDOMA offers Electrostatic Separators: differences in conductivity enable separation of extremely fine metal parts from plastics. The fully automatic Electrostatic Separation System of REDOMA consists of an electrostatic separator, storage bin with a variable speed screw conveyor, infeed and outfeed transport equipment and dedusting ...
-
Manufactured by NEPCO21 Co., Ltd.based in SOUTH KOREA
Model name: NE-450. Capacity: 200~250kg/h. Components: Pulverizer, melting machine all-in-one (separable types available), conveyer optional. Power: 50kw. Size: 2.8m x 1.6m x ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Extraction rates of up to 8,000 l/h. Polymer batching station Ultromat ULFa (continuous flow system): This metering system can be used to batch flocculation aids for the preparation of a ready-to-use polymer solution. The system was designed for the fully automatic batching of polymer ...
-
Manufactured by Eggersmann GmbHbased in GERMANY
Use the SF fine screen for post-treatment of the mixed paper fraction. Producing a loose, even stream, the fine screen prepares the material in an optimal way for manual, mechanical or optical sorting. The oversize grain consists mainly of valualbe de-inking ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Extraction rates of up to 2,000 l/h. The ProMinent metering system Ultromat ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation ...
-
Manufactured by Henan Doing Machinery Equipment Co., Ltd.based in CHINA
Used copper wire granulator for sale Used copper wire granulator is a complete solution for processing scrap automotive wires, communication cables and other miscellaneous wires and cables. By using this recycling machine, we can get pure copper granules and plastic pieces. The diameter of wires and cables suitable for the machine to process is below 20 mm, single conductor with diameter of ...
-
Manufactured by Gauss Magneti S.R.L.based in ITALY
Like CMTM, CMS / CMD have a diverse range of action. The main application is to recover / separate the ferrous material from a flow of granular material - such as chips or flakes - in which the process material, before feeding the magnetic drum, is distributed and widened by a vibrating feeder over the entire active width of the magnetic drum to ensure maximum separation efficiency. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you