Recycling Industry Systems Articles

  • Third tyre recycling system in Moscow region

    Eldan Recycling has successfully commissioned a tyre recycling plant for a customer in Russian Federation. The recycling system will process 15.000 ton car and truck tyres per annum, turning them into 20x20 mm chips. The customer, privately owned Dmitov RTI Industry, is one of the leading industrial waste recyclers in Russia. Dmitov RTI Industry have a well-diversified product range ...


    By Eldan Recycling A/S

  • Paper Recycling - Case Study

    The problem: The UK is the largest producer of wallpaper worldwide. The British wallpaper industry is situated around Darwen, Blackburn. Many of the wallpaper mills are operated in crowded old factory buildings. Once a leading wallpaper manufacturer Crown Wallpaper (also known as the Crown Wallpaper Company) was an agglomeration of wallpaper manufacturers in the United Kingdom since ...


    By Dirk European Holdings LTD

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Case study - Wastecycle – Nottingham, UK - Dry mixed recyclables / Commercial and industrial waste MRF

    Customer Wastecycle Ltd, based in Nottingham city in the UK is the leading resource management and recycling company in the East Midlands, and is part of the Environmental division of the DCC Group. Wastecycle process waste and material through their Recycling Facilities with over 90% recycled and recovered, whilst successfully locating and securing markets for over 200,000 tonnes of ...

  • Double-hydrophilic block copolymer as an effective and green scale inhibitor in industrial recycling water systems

    In an attempt to control CaCO3 deposits in industrial recycling water systems, the performance of acrylic acid (AA)–allylpolyethoxy carboxylate (APEL) copolymer as an economical and environmentally friendly inhibitor have been investigated by static experiments, scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The experimental results revealed ...


    By IWA Publishing

  • Plastic Recycling Industry - Case Study

    Introduction Bottle Recycling has been on the uprise for a number of decades. As the global community becomes more aware of the practices and benefits of reuse and recycling of plastics, they are also demanding that better controls be put in place by the manufacturers, corporations, environmental agencies and end users. This promotes these groups to look toward new technologies that are ...


    By Clean Water Technology, Inc.

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...


    By UNTHA Shredding Technology

  • Organics Recycling In North Carolina

    A recent study by state agency analyzed organic materials recycled since 2011, as well as food waste recovered in 2015. Findings show substantial organics recycling capacity. The North Carolina Department of Environmental Quality (NC DEQ) released a study in June 2016 analyzing the organic materials recycled since 2011, as well as food waste recovered in 2015. The facility reporting ...


    By BioCycle Magazine

  • Design for recycling: a route to green ship recycling

    Ship recycling at the end of a ship’s useful life aims to make the shipping industry more environmentally sustainable and is a major source of employment in developing countries. However, there are associated health, safety and environmental concerns. This study argues these concerns are due to inappropriate design and explains how ‘design for recycling’ can reduce the costs and ...

  • UK Bankrupt Recycling Firms Leave Giant Waste Piles With Million Pounds In Collection Expenses

    Has the UK recycling industry fallen prey to a market slump, low oil prices and a decline in product demand? Are we in desperate need for reform? According to The Guardian, 2014-2015 marked a 40% decline in the prices for recycled plastics. That and the recent lowering in oil prices have created a gap between the costs of 'virgin' and recycled plastics, a gap that neither producers, nor ...


    By Fantastic Waste Removal

  • Is it time to rethink recycling?

    If our current approach to recycling isn’t the best for the economy or the environment, why do we do it? Criticize recycling and you may as well be using a fume-spewing chainsaw to chop down ancient redwoods, as far as most environmentalists are concerned. But recent research into the environmental costs and benefits and some tough-to-ignore market realities have even the most ...


    By Ensia

  • FM Industry: Keeping Waste On Track for Rail Client

    Client: National Service Provider of Rail Systems Location: Kings Cross – Sheffield Line Date: Ongoing Sector: FM Manufacturing About the Project: The project itself was initially a 12 month contract and involved ...


    By GPT Waste Management Ltd

  • Pt. Lisas, Trinidad Receives 2 State-Of-The-Art Glass-Fused-To-Steel Water Storage Tanks as Part of Nation’s First Water Recycling Project for Water

    Florida-Aquastore, an authorized CST dealer serving the water storage and wastewater market across the state of Florida, the Caribbean, and Central and South America, has completed construction on two glass-fused-to-steel tanks at Point Lisas in Trinidad – the twin island country off the northern edge of South America.  The tanks were part of a $167,000,000 USD upgrade to the Beetham ...


    By CST Industries Inc

  • WWTP Industrial Coating Sector

    The pre-treatment operations prior to coating are the core of the fi nishing process of metal and plastic products: The end quality of any type of coating can precisely depend on a proper pre-treatment. Two types of pre-treatment are carried out in the metal coating processes: Chemical and mechanical. For the second type, dry technologies are used, such as shot blasting, sand blasting and so on, ...


    By SIMPEC S.r.l.

  • Commercial Viability of the Glass Recycling Industry

    Thanks to the increasing awareness of both the environmental and financial benefits of glass recycling, it isn’t just limited to individuals and households anymore. Bars, restaurants, night clubs and even entire industries have started recycling glass products. Recycling has grown beyond just a way to save the environment, it’s now an ...

  • Recycling Problems in Paradise

    Just a few months ago, Costa Rica landed in the center stage of environmentalism after running on 100 percent renewable energy for the first 75 days of 2015. With an already strong image in the environmentalist movement,this achievement only came to reinforce the country’s relevance in the green arena. Nonetheless, critique ...


    By Earth Day Network

  • Investigation and analysis of college's water system: the case of Northeastern University

    To date there have been many studies of water system optimization which were focused on the water use performance of industrial, regional, and urban areas from a macro-perspective. However, water system optimization colleges and universities are rare, though the amount of water consumption is huge in higher education institutions. We applied a water extended input–output model to investigate ...


    By IWA Publishing

  • Starting an Dutch EVD project, after not having the finances to set up a tire recycling in Romania - Case Study

    Pro Auto Industries SA was in 2006 enthusiastic about our approach in Croatia, but they didn't had enough budget to establish  it like in Croatia. We as Granuband Knowledge Center have arranged a Dutch EVD project between both countries. "What a waste! Introducing tire recycling in Romania" The Agency for International Business and Cooperation (EVD) is a part of the Dutch ...


    By Granuband Knowledge Center

  • 2015 Chinese resources of waste & waste materials recycling and processing industry Analysis

    China resources of waste and waste materials recycling and processing industry, 2015 is valuable for anyone who wants to invest in the resources of waste and waste materials recycling and processing industry, to get Chinese investments; to import into China or export from China, to build factories and take advantage of lower costs in China, to partner with one of the key Chinese corporations, to ...


  • A Case Study of a Steel Plating Mill Water Recycling System

    Case study Summary: Wastewater recycling in a steel plating mill utilizing crossflow membrane filtration and reverse osmosis. Abstract: Steel manufacturing plants are large water consumers that use a tremendous amount of water in their production process. As a result of the increasing demand in resource sustainability, high quality process water and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you