Recycling Plants Articles

  • The Garbage Recycling Plant Cost Estimate

    While searching for a garbage recycling plant cost estimate you really have to perform your due diligence. How come we recommend that you may have to complete far more research, we advise that you should do plenty of research because price is certainly a critical thing. Price is rarely the identical all different varieties of products and recycling plant. Instead, you could possibly end up ...


  • The REMAV light-weight separator LA1400 / LA1200

    The REMAV light-weight separator LA1400 / LA1200 is a system that has been tried and tested for many years and that reliably separates floating, light-weighted materials, such as foam, wood, styrofoam, insulation, cork, aerated concrete ect. of mineral substances such as concrete, gravel, stones, etc. With a very low energy consumption of only 7KW/h, up to 70to RCL/h can be recycled with the ...


    By Remav GmbH

  • Garbage Recycling Plant Cost Estimate - Get The Free Quote Today

    The cost to reward ratio for establishing a garbage recycling machine favors such a business in additional ways than one. You have the simple fact it benefits the planet, but an entrepreneur undertaking this kind of project also benefits financially. These recycling plants are incredibly efficient, with features such as an automated ...

  • Plastic recycling pyrolysis plant

    Plastic waste can be seen everywhere in our daily life and it brings about serious pollution problem. But on the other hand, it is also a kind of precious potential resource and it is meaningful to dispose waste plastics in an effective method. To grasp the great business opportunity, Doing group has successfully developed the new design ...

  • Reliable explosion protection in an oil tanker vapor recycle plant – Case Study

    In-situ gas analyzer monitor oxygen in real-time Project The world-class transshipment and storage facility Kiire, Japan, contains 46 million barrels of crude oil in 57 storage tanks, an amount equal to Japan’s two week demand. Continuous loading and unloading of oil tankers generates odorous gases and additionally results in losses of volatile ...

  • Taking advantage of production waste - Case Study

    Recycling areas: Various scrap Company name: KME (Serravalle Copper Tubes) Located: Serravalle Scrivia (Alessandria), Italy Founded: 1886 Employees: 5700 KME is a leading global fabricator of copper and copper alloy semi-finished products. Each year 405.000 tons of copper and copper alloy semi-finished products (excluding copper wire) are produced. ...


    By Eldan Recycling A/S

  • Case study - UUSIOAINES Oy – Finland - Packaging glass recycling plant

    Customer Uusioaines Ltd. has specialized in the recycling of packaging and float glass since 1995 in the Forssa area. Suppliers of packaging glass in Finland are the Finnish National Alcoholic Beverage Retailing Monopoly and other waste management companies. Situation The capacity of the glass recycling plant meets the total demand for the ...

  • Case study - PFR Nord GmbH - PET recycling plant

    Customer The Mensing Group of Companies in Hohenwestedt (Germany) invests almost € 10 million in the construction of a new PET recycling plant. The construction of the recycling plant is associated with the formation of PFR Nord GmbH in Hohenwestedt. About 30 new jobs have resulted there. On the whole, Mensing Group, which also includes AFA Nord GmbH and TM ...

  • Circular economy: CEDO gives plastics a genuine second chance - Case Study

    Blown films are highly demanding products, and consequently the use of recycled material in their production represents a major challenge. Impurities in the feed material necessarily lead to production faults that can range from specks and minor defects in the tubular film through to production stoppages. Nevertheless, the CeDo Group, which is based in the English town of Telford and is regarded ...


    By Lindner-Recyclingtech GmbH

  • Reliability and prepress technology deciding factors when Stena Recycling chose Presona

    Stena Recycling in Kristianstad, Sweden, is featuring a new Presona LP 100 DH4S baler, increasing its baling capacity and ensuring production with a minimum of stoppages. Stena Recycling’s Kristianstad facility is one of the company’s 165 recycling plants in Sweden, Norway, Denmark, Finland and Poland and manages a wide variety of materials from municipal and business ...


    By Presona AB

  • Tearing up Tires

    When State Rubber & Environmental Solutions started shredding tires about a decade ago, the company had optimistic plans for growth and volume. In the decade since then, its actual output is nearly doubled the company's initial projections. Vice President Jerry Woosley credits State Rubber's growth to its "machinery tweaking" and knowledge of how to squeeze the most from its equipment. ...


    By Granutech-Saturn Systems

  • New PET recycling plant at PFR Nord - Case Study

    The Mensing Unternehmensgruppe in Hohenwestedt (Germany) invests almost 10 million Euros in the construction of a new PET recycling plant. The construction of the recycling plant is associated with the new foundation of the PFR Nord GmbH in Hohenweststedt, where almost 30 new workplaces have been created. Altogether, the Mensing Group, which also includes the AFA Nord GmbH and the TM Recycling ...

  • coat hanger recycling

    A new FREE coat hanger recycling scheme has been launched by Cheshire based 300 Recycling Ltd.  A spokesman for the company confirmed that the plant is now fully operational and is fully mechanised and can process over 3 tonnes of coat hangers per hour.  The other advantages are no segregation is required as ALL types of coat hangers are shredded into small pieces and cleaned of all ...


    By 300 Recycling Ltd

  • Unattended Weighbridge - Weighmatic

    The Unattended Weighbridge - Weighmatic is an innovative weighing application developed by Leon Engineering is suitable for the Waste Recycling plants , Biomass to Energy plants, Oil and Gas Stations, Cement Plants ...


    By Leon Engineering SA

  • Going greener: streamlining recycling plants

    Richard Price is a baby boomer whose lifelong passion for the environment and technology is fueling his ambitious plans for recycling. The Canadian-born electrician turned California entrepreneur is transforming an industry one material recycling facility (MRF) at a time. “Recycling is synonymous with efficiency until you take a closer look at recycling plants across the country,” ...


    By Waste Advantage Magazine

  • Construction waste recycling plant delivers added value for Yorkshire Aggregates

    Yorkshire Aggregates have become the latest company to install a recycling plant from Co.Tyrone-based CDE Ireland with an 80 tonnes/h plant now operational at their site in Doncaster, South Yorkshire.Yorkshire Aggregates are one of the most prominent names in the construction products and recycling industry in the northof England with a number of branches to the business. In addition to the new ...


    By CDEnviro

  • An Eco-balance of a Recycling Plant for Spent Lead–Acid Batteries

    This study applies Life Cycle Assessment (LCA) methodology to present an eco-balance of a recycling plant that treats spent lead–acid batteries. The recycling plant uses pyrometallurgical treatment to obtain lead from spent batteries. The application of LCA methodology (ISO 14040 series) enabled us to assess the potential environmental impacts arising from the recycling plants operations. Thus, ...


    By Springer

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you