tire-derived fuel production Articles

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • The Waste Industry: Refuse Derived Fuel Hits a New Level

    The Environment Agency published the final data up to the end of December 2014 in February. It shows that the overall tonnage of RDF sent overseas throughout the year topped 2,373,611 tonnes. The figures confirm the rapid growth in demand for RDF from operators in the UK from European energy from waste facilities, with 2014 continuing the trend of increasing exports to facilities overseas. RDF is ...


    By GPT Waste Management Ltd

  • Suspension Burning for Tire Fuel Optimization in Precalciner Cement Kilns

    Synopsis: A presentation on optimizing substitution rates of Tire Derived Fuel (TDF) in precalciner kilns using Suspension Burner technology.  Discussions will be made on the challenges faced by both preheater and precalciner kilns using TDF on the feed shelf, technical measures aimed at solving these limitations, achieving high TDF ...


    By AFS Technology

  • One TANA Shark replaces two machines in the efuse-derived fuel (RDF) business - Case Study

    For Attero Recycling Ltd. operating in the alternative fuels sector, TANA Shark is the only shredder on the market that can produce the required particle size for solid recovered fuel (SRF) in a single pass. After the purchase, Attero was able to cut the number of machines in half and increase output, saving time and money. ...


    By Tana Oy

  • Tire Shredding: Alternatives to Landfills

    For many reasons, whole tires pose a major problem to landfills. The most obvious is the inefficient use of space. The actual rubber of a tire takes up only a small fraction of the space a tire occupies, and the rest of the space is wasted. A less obvious but far more serious problem is that tires may trap methane gasses when buried with other garbage in landfills. When this happens, the tires ...


    By ECO Green Equipment

  • KAB - Polaris 2800 - Polaris Single-Shaft Shredder from Lindner optimizes the one-step processing of refuse-derived fuel - Case Study

    The Polaris 2200 and 2800 are two new single-shaft shredders from Lindner that have been optimized for the cost-efficient, single-step shredding of untreated household refuse as well as industrial and commercial waste. A typical application area is the processing of refuse-derived fuel (RDF) that is used instead of fossil fuels in calciners of cement factories or in thermal power plants. Because ...


    By Lindner-Recyclingtech GmbH

  • Old Tires Face the Zero Waste Option

    TIRE PILES and tire fires were a prominent environmental burden 20 years ago, but today's options are cleaner with better economic payback. Recovery and use of rubber as an industrial material are far more valuable than use of these feedstocks as fuel. While the price of energy may have doubled in the past few years, the price of virgin rubber compounds has more than tripled - from 30 cents to 95 ...


    By BioCycle Magazine

  • Permitting of Alternative Fuels and Raw Materials at Portland Cement Plants Post NSR Reform

    Introduction One of the ways that the portland cement industry is seeking eco-efficiency gains is in waste co-processing and energy/material recovery - using the waste and by-products of other industries as fuels and raw materials for cement manufacture.1 These wastes and by¬products of other industries, such as tires and plastics (fuels) or blast furnace slag and fly ...


    By Trinity Consultants

  • What is RDF?

    "Refuse Derived Fuel" comes from Refuse Derived Fuel, literally: fuel from garbage. All kinds of garbage sorted, broken, eddy current in addition to aluminum, magnetic separation of iron, and then broken, wind selection, compression and drying processes made of solid form (cylindrical bar) fuel, referred to as RDF. RDF calorific value is 14595-20016 kJ / kg, much higher than coal (about 10870 kJ ...

  • SRF – a class of its own

    Solid Recovered Fuel (SRF) is still classified as a waste material, not a product, despite the fact it is manufactured to a quality specification and is a resource from which energy can be recovered. Here, UNTHA UK’s alternative fuel production expert Marcus Brew considers the parameters within which SRF must be manufactured, before investigating the arguments for and against SRF being ...


    By UNTHA UK LTD

  • Recyclers help to cut huge container imbalance

    The Port of Rotterdam Authority is housed in an office building with probably the most stunning view over Rotterdam. From the top floor, visitors have a breathtaking view on the many barges which are travelling along the busy river, the Erasmus bridge and the skyline of Europe’s main port.  Speaking about the importance of ports and harbours to the recycling industry, Victor Schoenmakers, at ...

  • French SRF manufacturer boosts capacity with UNTHA shredder investment

    Solid Recovered Fuel (SRF) manufacturer Environnement 48 has increased the capacity of its waste processing facility in South West France, having invested in its second UNTHA shredder. Already one of the region's most established waste management companies, Environnement 48 hit the headlines in early 2016 when its ...

  • First UK installation for UNTHA TR Series shredder at new HW Martin RDF facility

    When HW Martin required a state-of-the-art RDF facility, they chose OKLM to design and build the plant and the revolutionary new UNTHA TR Series shredder, supplied by Riverside Waste Machinery, to fulfil their high-performance shredding requirements. This is the first UK installation for UNTHA’s new TR Series shredding technology which was developed specifically for the processing ...


    By UNTHA UK LTD

  • Alba Nordbaden - Polaris 2800 - Lindner Polaris has the best performance - Case Study

    ‘We are happy across the board.’ In this interview Joachim Wunsch, the busy Operational Excellence Manager at ALBA Nordbaden, talks about how the Polaris 2800 single-shaft shredder from Lindner Recyclingtech became the centrepiece of the company’s new RDF plant in Karlsruhe, Germany. ...


    By Lindner-Recyclingtech GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you