Roll Compactors Equipment For Waste And Recycling Available In Missouri
-
Manufactured by K.R. Komarek Inc.based in USA
The DH Series machines feature rolls located symetrically between two bearings, allowing for greater roll separating forces. The DH Series machines are typically used for briquetting hot materials as the rolls can be located farther away from the bearings. The DH450 applications include: carbon-based fuels, inorganic chemicals such as quick lime (CaO), mineral ores, metal oxides, and industrial ...
-
Manufactured by K.R. Komarek Inc.based in USA
The B Series briquetting and compacting machines have cantilevered rolls on the end of each shaft for easy roll change. The B Series machines are typically used for materials that require high briquetting pressure, such as calcium oxide, metal powders and activated carbon. The B220B is ideal for small-scale, low production briquetting ...
-
Distributed by Olympic Wire and Equipment, Inc.based in USA
These “state of the art” roll-off Self-Contained Compactors are designed to handle large volumes of wet waste as well as mixed wet and dry waste. Rear door retains wet liquid waste effectively with a double hinge and specially designed seal. This unit assures liquid retention with a sub floor sump in the container floor that drains when ...
-
Manufactured by K.R. Komarek Inc.based in USA
The B Series briquetting and compacting machines have cantilevered rolls on the end of each shaft for easy roll change. The B Series machines are typically used for materials that require high briquetting pressure, such as salt, fertilizer and organic carbon. The BH400CH was developed to meet a growing demand for briquetted or granulated products manufactured using dry pressure agglomeration ...
-
Manufactured by Broyhill, Inc.based in USA
Easier Faster Safer Trash Handling. Be productive and have fewer incidents with Broyhill’s 4.0 cu yd steel hopper. Fits ½-1-ton pickups with installed overload spring, with 6’or 8’ bed. Can tipper standard. 12-volt hydraulics charged by vehicle alternator. Empties into roll-off or packer trucks. Corded Controller for easy ...
-
Manufactured by Bergmann, Heinz, e.Kfm.- Machines for Waste Managementbased in GERMANY
The skip, patented by BERGMANN, is a simple, yet ingenious way to collect production waste directly at the place of work. The removal occurs via forklift trucks or the optionally available steering rollers. The skip is emptied via a forklift truck directly into an open container or in a Mobile-Pack-Bin or ...
-
Manufactured by ULVAC GmbHbased in GERMANY
EW -Series models are deposition systems for evaporation of metal or oxides onto continuously-wound plastic film, paper or metal foil. Models range from compact types for research, to systems for mass-production. They can be used to manufacture products such as packaging materials, capacitors and magnetic ...
-
Manufactured by K.R. Komarek Inc.based in USA
The DH Series briquetting and compacting machines feature rolls located symetrically between two bearings. Making these machines capable of greater roll separating forces. The DH Series machines are typically used for briquetting hot materials as the rolls can be located further away from the bearings. Briquetting and compacting applications with the DH300 include carbon-based fuels, inorganic ...
-
Manufactured by K.R. Komarek Inc.based in USA
The B Series briquetting and compacting machines have cantilevered rolls on the end of each shaft for easy roll change. The B Series machines are typically used for materials that require high briquetting pressure, such as calcium oxide, metal powders and activated carbon. The B400B is designed for briquetting quicklime and other materials requiring high ...
-
Manufactured by Bergmann, Heinz, e.Kfm.- Machines for Waste Managementbased in GERMANY
The new BERGMANN Trans-Pack-Flexible-System, combines the advantages of the Roll-Packer with those of a truck: Only with the Trans-Pack-Flexible is it possible to compact large quantities of bulky waste or re-usable materials in several open containers at various, far-apart locations - and with only one ...
-
Manufactured by Welger Recycling Engineering GmbHbased in GERMANY
The new development of Welger is a consistent step for the rationalization and full automation of the internal disposal of recycling materials. The Welger Roll Compactor RC 660 works with most different, cleanly sorted packaging materials. Especially re-expanding waste can be reduced down to 10% of its original ...
-
Distributed by Preferred Recycling Equipment Incbased in CANADA
K-PAC’s KP1HT Self-Contained Compactor is an excellent choice where vehicle maneuvering space is limited, including chute or dock fed applications. By building the compactor onto the door where compacted solid waste material is emptied, time is saved by eliminating the extra maneuver required to turn conventional roll-off compactors. The hydraulic tailgate facilitates dumping of the ...
-
Manufactured by Precision Waste Systems Limitedbased in CANADA
Compactor Containers are suitable for many applications in the Industrial, Commercial, and Institutional sectors. Teamed with stationary compactors our containers are designed to receive high volume waste applications in such places as warehouse facilities, grocery stores, and hospitals. The container capacity is manufactured for 40 cubic yards, 20’ length, 82″ inside wall height. ...
-
Manufactured by Turbo Recyclingbased in USA
Our model T42 is the flagship of depackaging systems for pre-consumer food waste streams. It has the ability to process from 10-30 ton per hour depending on the products. The horizontal shaft has 56 flat paddles that work together to split, separate, and ...
-
Manufactured by Pac-Blocbased in USA
The Pac-Bloc is the only roll-off compactor on the market. By compacting material in a roll-off container, the number of hauls to the landfill is reduced, thereby saving your company money each month. It is safe and easy to ...
-
Manufactured by Thetford International Ltdbased in UNITED KINGDOM
Demountable waste compactors are machines which offer a solution to the need for temporary on-site waste management systems across a wide spectrum of ...
-
Manufactured by OMB Technology S.r.l.based in ITALY
VSC - VIPER is part of the Refuse Collection Vehicles (RCV) family, designed, manufactured and commercialized by Busi Group companies. Watertight Refuse Collection Vehicles are ideal for door to door waste collection system in urban areas such as historical town or city centers and mountain locations. The loading can be manual or made by bin lifter (AVC). The simplified model without bin lifter ...
-
Manufactured by K.R. Komarek Inc.based in USA
The DH Series machines feature rolls located symetrically between two bearings, allowing for greater roll separating forces. The DH Series machines are typically used for briquetting hot materials as the rolls can be located farther away from the bearings. The DH400 is ideal for briquetting and compaction applications that include carbon-based fuels, inorganic chemicals such as quick lime (CaO), ...
-
Manufactured by Brask Enterprises, Inc.based in USA
These units are state-of-the-art in roll-off self-contained compactors, featuring oversized feed openings and expanded container storage capacity. They are designed to store and transport your waste, prevent contamination of public areas in accordance with public health department requirements, improve working conditions for your employees, and reduce disposal ...
-
Distributed by LyCox Enterprises, Inc.based in USA
WR75 Series 3 Walk 'n' Roll Packer/Roller. The WR75 is 75" Wide. Has Five (5) independent Walking Beams, Ten (10) 7.50 X 15 fourteen ply smooth tires. It has a single beam main frame with a high arch ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you