Only show results in Connecticut? Ok

Rubber Recycling services for Waste and Recycling

  • Premium

    Tyre Recycling Services

    Used tyres are among the largest and most problematic sources of waste today, due to the large volume produced and their durability. The same characteristics which make waste tyres a waste problem also make them one of the most re-used waste materials. Recycled tyre chips can be used for TDF (Tyre Derived Fuel) which is a fuel used for heat plants ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Premium

    Electronic Waste Recycling Services

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Premium

    Cable Recycling Services

    ELDAN Recycling has been active within cable recycling close to 60 years. What started with cable cutters, has expanded into including cable strippers, alligator shears and ACSR shears as well as machines and complete plants for processing of cables. Since copper and aluminium is 100% recyclable without loss of quality recycling of cable has ...

    By Eldan Recycling A/S based in Faaborg, DENMARK. from Recycling Areas Service line

  • Electronic Waste Disposal & Recycling Service

    There are many types of wastes generated from the manufacturing of printed circuit boards, electrostatic controls and connectors used in the electronics industry. These wastes vary from the common to the unique. Progressive Environmental Services is specially suited to service wastes from all of these types of manufacturers. With our vendor base ...

    By Progressive Environmental Services, Inc. based in Barrington, ILLINOIS (USA).

  • Site Remediation Services

    Soil, sediment, and groundwater remediation are major components of site restoration and a specialty for Creamer Environmental, Inc. (CEI).  Our team of experts has completed remediation projects at a wide variety of industrial, commercial, and residential sites - including landfills, buried drum disposal sites, chemical manufacturing and ...

    By Creamer Environment, Inc. (CEI) based in Hackensack, NEW JERSEY (USA).

  • Recovery of Material Services

    In order to recover the material, the ELTs are fed into special plants in which they are subjected to a granulation process, which reduces the ELT to increasingly small fragments, in several stages, culminating in the production of fine rubber powder with a grain size of less than a millimetre. The process ends with the separation of the granules ...

    By Ecopneus scpa based in Milano (MI), ITALY.

  • Tire Recycling Services

    With today's ever increasing requirements for environmental protection and environmentally friendly production,Welantech International has started to add recycling technology to its product portfolio, with focus on waste tires and plastics film.Welantech's waste tire recycling equipment used to produce rubber crumb, which is getting an ever ...

    By Welantech International GmbH based in Vienna, AUSTRIA.

  • Plastic Recycling Services

    ETA is a full service recycling firm. We manage virtually all post industrial and post consumed plastics, rubbers, additives and polymer recyclable materials. Our services includes industrial and commercial waste recycling administration, transportation, universal waste handling, purchase and sale of post industrial or post consumed plastics.

    By Southeast Baling Wire & Equipment Sales based in Madison, ALABAMA (USA).

  • Innovative Recycling Waste To Fuel Process

    With development of global economy, more and more cars are applied in daily life; consequently, quantities of waste & used rubber tire increase dramatically each year. Pollution caused by waste & used rubber tire had become a severe subject in global environmental protection. Recycling of used and waste & used rubber tire had been ...

    By Innovative Recycling (Pty) Ltd. based in Newlands, SOUTH AFRICA.

  • Tire Disposal And Collection Services

    Tire collection for recycling simply makes sense. Ontario residents can dispose of their used rubber tires free of charge at any Ontario Tire Stewardship (OTS) registered collection location. OTS reports that over 33 million tires have been recycled in Ontario since it started in 2009, achieving an average diversion rate of 96 per cent. Collecting ...

    By Emterra Group Inc based in Burlington, ONTARIO (CANADA).

  • Anaerobic Treatment

    ACWA Services Ltd. has a proprietary hybrid anaerobic reactor for the treatment of high strength industrial wastewaters. The ACWA hybrid anaerobic reactor combines the benefits of an upflow anaerobic sludge blanket (UASB) and anaerobic filter (AF) systems, and can typically remove 80% of the feed organic load.

    By ACWA Services Ltd based in Skipton, UNITED KINGDOM. from Wastewater Service line

  • Custom Services

    Our company offers the service according the service idea that “quality is our essence, innovation is the road for developing, and the satisfaction of the customers is our aim ultimately.” The before-sell service and after-sell service as feasible analysis to the projects, projects design, equipment producing, and engineering install ...

    By Henan Zhongying Rubber Technology Co.,Ltd based in Sanmenxia, CHINA.

  • Products from Used Tyres

    Intowaste is at the forefront of the sales of products made from used tyres. These products and markets include: Aggregate replacements from used tyre chip or tyre shred - Intowaste provides BSI PAS 107 technical sales and supplies tyre chip to the landfill and civil engineering market - as a replacement for virgin aggregate for drainage and for ...

    By Intowaste Limited based in Newbury, UNITED KINGDOM.

  • Process/Innovation Services

    The Breakdown: Processing starts with shredding the tire, a primary reduction step that reduces the volume of tires and creates a material that is easily handled. Tire shredders typically shear tires with two counter rotating shafts, producing 2-inch pieces. To further break down scrap tires, Liberty Tire Recycling uses one of two systems – ...

    By Liberty Tire Recycling based in Pittsburgh, PENNSYLVANIA (USA). from Recycling Service line

  • Pelletization of Peat

    Presently the peat pellets enjoy the growing popularity over the traditional types of peat fuel (such as lump or milled peat fuel) in view of their high technological effectiveness and environmental friendliness.

    By ICK GROUP based in Kyiv, UKRAINE.

  • Atmospheric Microfiltration Services

    Atmospheric microfiltration is applied for very fine filtration of great water volumes before their next usage. The MICROFILTR OD is used for microfiltration of cooling water circuits, additional water of closed cooling systems, process water in energy production, rubber and chemical industry, paper mills, or very fine filtration of wastewater. ...

    By INKOS CZ, s.r.o. based in Brno, CZECH REPUBLIC.

  • Waste Rubber Recycling

    Gain valuable raw materials from old tires: Pyroclean oil, carbon black, spring steel and energy. Through the TFP process, for the first time, it is now possible to extract liquid fuel oil, carbon black, spring steel and incondensable gas from used tires. There is no other process available that can 'dispose' of used tires in a more ...

    By Concept Green Holding GmbH based in Ansbach, GERMANY.

  • Maintenance and Repair

    As a leading manufacturer of all types of gas stop-off bags with its own manufacturing unit in Speyer, Germany, Städtler + Beck also offers regular maintenance services to test its own bags, as well as those of other manufacturers. Doing so, we not only test expandability, tightness and condition of your stop-off bags, but also ...

    By St├Ądtler + Beck GmbH based in Speyer, GERMANY.

  • Plastics and Rubbe Depolymerization Services

    The depolymerization of plastics and rubber is the basis of the waste-to-diesel process. The plastics and rubbers are gradually heated to temperatures of 400 to 450 ° C. During the depolymerization long carbon chains such as plastics and rubbers set into shorter chains, typically a chain length C8 to C20.Generally something is ...

    By Ingenia Consultants & Engineers BV based in Eindhoven, NETHERLANDS.

  • Design Assistance Program Services

    As a rubber seal manufacturer, Seal Master Corporation understands that every inflatable seal application is unique, and we stand ready to assist you with your rubber seals project during the RFQ process. We offer design assistance on new reinforced inflatable seals , inflatable door seal applications and ...

    By Seal Master Corporation based in Kent, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you