Sawdust Recycling Articles

  • Not any lubricant is suitable for rod making machines

    First of all, it is not better to add oil: the design of a piece of sawdust briquette making machine strictly stipulates the amount of fuel, and the operator should replenish the lubricant according to the instructions and daily observation of the oil standard, sight glass, etc. If more oil is added instead, it has ...


    By ABC Machinery

  • Deluge System for Enclosed Conveyor Fire Mitigation

    The 2020 edition of NFPA 664 states that manufacturers must supply fire protection and explosion mitigation systems where fire, flash fire, and explosion hazards exist. Come September when operations are required to complete their dust hazard analysis, we suspect many will realize they’re noncompliant with the rules. When that time comes, be assured ...

  • A Waste Tyres Pyrolysis Plant Can Work To Save The Environment

    Initially it could appear to be tyre can be a miracle material that is able to be molded into millions of different items that last nearly forever. They resist sunlight and so are totally waterproof, can be done strong and still be lightweight. So what’s wrong using that picture? Well, these wonderful benefits are why the planet is nearly buried in waste tyre from every country, city, and home. ...

  • Rod Making Machine Making Sawdust Briquettes

    The new rod making machine is also called wood chip making machine, rice husk rod making machine, sawing rod making machine, sawdust briquette machine, and charcoal briquette machine. This machine is a device for ...

  • Wood Sawdust Briquette Machine Guideline

    Wood sawdust is a kind of biomass from the wood and timber industry, which is the commonest typical biomass waste. Sawdust briquette machine is the popular equipment to make mechanism charcoal. What Is Wood Sawdust briquette Compared to the ...

  • Talk About Feed Pellet Machine Feed Processing Equipment

    With the progress and development of the breeding industry, there are more and more farmers. However, no matter for small and medium-sized farms or large farms, feed pellet is the most important part of the farms. While many farmers purchase full-price feed, they also wonder whether their farms can save costs to make feed themselves, so feed processing equipment has gradually become popular. ...

  • Wood Products Particle/OSB Direct Drying and Power - Swiss Krono Group - Case Study

    OWNER Swiss Krono Group LOCATION Sully-sur-Loire, France PRODUCT One Taurus 70 (7.5 MWE) and Two Taurus 60 (5.5 MWe) Gas Turbines CUSTOMER VALUE Sustainability The Swiss Krono Group is one of the first European wood panel producers. The Sully-sur-Loire Swiss Krono plant ...


    By Solar Turbines

  • Hurricane EX System to Reduce Particulate Matter from Sawdust & Wood Shavings

    FOREWORD OneFortyOne (OFO) is a world-class sustainable forest grower and forest products company with a multi-regional approach to investing and growing its business in Australia and New Zealand. OFO produces and distributes a range of wood-based building products from Jubilee Highway Sawmill in Mount Gambier. Facing an environmental problem identified by ACS representative Windsor ...

  • WOOD RECYCLING MACHINE

    Where to buy wood recycling machine? In ROTECHO you will see complete wood recycling solutions which covers household and industrial scale. All those solutions aim to recycle waste wood into different engineered-wood products with extensive market prospect by extruding and hot pressing technology. The raw material can be sawdust, wood shavings, ...

  • Sawdust Wood Pallet Block Press Machine

    Rotecho's pallet logs hot press machine is specially designed for pressing sawdust, wood shavings and other wood scraps into pallet blocks by heating and extruding system. Raw material application:Small logs, tree branches, sawdust, wood chips, timber residue, log off-cuts, plywood trimmings, old board, etc. Block ...

  • Wood Recycling

    Diversified wood recycling is highly beneficial and old timber can be used without felling of more trees, it can also reduce the need for new landfills, maintain air quality, reduce green house effect and soil erosion, meanwhile it plays an important role in circular economy, especially with the development of logistics, wooden packing and board ...

  • Do You Know How to Use the Sawdust Dryer Correctly

    The wood chips dryers are always used to dry the biomass materials to the suitable moisture of about 15% to make wood pellets. The workers must know the operation regulations of the dryers otherwise you may not achieve the desired outcome because of some minor details. 1, After the ...

  • Bad housekeeping can bring unthinkable consequences

    What’s at Stake Some people can’t stand a mess, while others leave an evidence trail of poor housekeeping everywhere they go. But in the workplace, bad housekeeping can have consequences that go far beyond creating an image of a sloppily run, unprofessional operation. What’s the Danger Poor housekeeping causes a wide range of injuries and ...


    By SafetySmart

  • Adsorption kinetics and equilibrium study of nitrogen species onto radiata pine (Pinus radiata) sawdust

    Nitrogen species (NH3-N, NO3-N, and NO2-N) are found as one of the major dissolved constituents in wastewater or stormwater runoff. In this research, laboratory experiments were conducted to remove these pollutants from the water environment using radiata pine (Pinus radiata) sawdust. A series of batch tests was conducted by varying initial concentration, ...


    By IWA Publishing

  • Breakthrough curves of oil adsorption on novel amorphous carbon thin film

    A novel amorphous carbon thin film (ACTF) was prepared by hydrolyzing wood sawdust and delignificating the residue to obtain cellulose mass that was subjected to react with cobalt silicate nanoparticle as a catalyst under the influence of sudden concentrated sulfuric acid addition at 23 °C. The novel ACTF was obtained in the form of thin films like graphene sheets having winding surface. The ...


    By IWA Publishing

  • Activated carbons from waste of oil-palm kernel shells, sawdust and tannery leather scraps and application to chromium(VI), phenol, and methylene blue dye adsorption

    Phenol, chromium, and dyes are continuously dumped into water bodies; the adsorption of these contaminants on activated carbon is a low-cost alternative for water remediation. We synthesized activated carbons from industrial waste of palm oil seed husks (kernel shells), sawdust, and tannery leather scraps. These materials were heated for 24 h at 600, 700 or 800°C, activated at 900°C ...


    By IWA Publishing

  • Vanadium(V) removal from aqueous solution and real wastewater using quaternized pine sawdust

    Cross-linked and quaternized pine sawdust was tested for vanadium removal from a synthetic aqueous solution as well as from real industrial wastewater which had a considerable amount of vanadium and other ions such as sulphate, ammonium and nickel. The maximum vanadium sorption capacity of the modified pine sawdust was found to be 130 mg/g in synthetic solution and 103 mg/g in real wastewater. ...


    By IWA Publishing

  • Equilibrium, kinetics and process design of acid yellow 132 adsorption onto red pine sawdust

    Linear and non-linear regression procedures have been applied to the Langmuir, Freundlich, Tempkin, Dubinin–Radushkevich, and Redlich–Peterson isotherms for adsorption of acid yellow 132 (AY132) dye onto red pine (Pinus resinosa) sawdust. The effects of parameters such as particle size, stirring rate, contact time, dye concentration, adsorption dose, pH, and temperature were ...


    By IWA Publishing

  • ACS installation at Glowood 100,000ton/y pellet plant achieves 12mg/Nm3 - Case Study

    With increasingly tougher restrictions on industrial air emissions, pellet manufacturers are looking to "future-proof" particulate matter (PM) compliance, cost effectively. One Portuguese producer, Glowood Indústria S.A., has recently installed a brand new type of mechanical cyclone. The most recent results show a remarkable reduction of its PM emissions, from 700mg/Nm3 to under ...

  • Wood Waste SPB Moulds - Case Study

    A mould-making factory in Stoke on Trent is making and saving money since purchasing a briquetting machine from Gross UK and a wood waste heater from Wood Waste Technology. Since 2008, Stoke on Trent company SPB Moulds has made patterns for metal casting, and supplies foundries across the UK. Whilst looking at ways to reduce business costs, the team spotted an opportunity in the market to supply ...


    By Wood Waste Technology Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you