Scrap Metal Recycling Applications

17 Results found
Only show results available in Virginia?
OK
  • Category: Waste & Recycling ×

  • Subcategory: Scrap Metal Recycling ×

XRF analysis for positive material identification

by Niton UK Limited     based in Woodmancott, Winchester, UNITED KINGDOM

Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

Recycling equipments for ferrous scrap metal shredding & recycling

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional Granutech machinery such as the MAC Magnum Logger, or MAC Big MAC auto crusher can compact and densify larger ferrous items reducing transportation costs.

Recycling equipments for shredding scrap metals

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

Systems for the scrap metal industry

by OBC Baling Equipment     based in Cleveland, OHIO (USA)

From small recycling yards to huge regional processors, every scrap yard has a different mix of materials, volumes and demand cycles. And your equipment collection should be precisely prescribed to match. Having the right stable of balers, shears, wire strippers, choppers, shredders and other assets is crucial to running a perfect processor. Ensuring you can scale up through growth and expansion is even more critical to your future success. OBC has maintained many long-term relationships with scrap metal processors, and can leverage this experience to help you craft the best configuration of equipment to serve your specific needs.

metal scrap baler

by suzhou eaglestar import and export co.,ltd     based in CHINA

Y81 hydraulic balers for scrap copper are suitable for all kinds of scrap metal as following Apply in: 1. Various steel paring 2. Scrap metals, such as waste copper, aluminum, copper and so on 3. All kinds of old things made of metal, like aluminum can, household appliances, oil drum bike, car etc

Scrap Metal Baler

by Jiangsu Wanshida Hydraulic Machinery Company     based in Jiangyin, CHINA

1. Product Name: Y83-250 Scrap Metal Baler For Sale 2. Application: Y83-2500 Scrap Metal Baler For Sale is suitable for the steel plants, recycling companies, ferrous & non-ferrous metal smelting industry to compress metal scrap(steel parings, waste steel, waste copper & aluminum, waste stainless steel, scrap from discarded automobiles) into acceptable furnace charges of cuboids, cylinders, octagons & other shapes, so as to reduce the cost of transportation & smelting, to speed up furnace charging. 3. Metal Baler Specifications: Nominal force (kN):2500 Dimension of compress room (L*W*H) (mm):2000*1400*900 Bale dimension (L*W*H)(mm):(400-700)*450*450 Bale density (kg/m3 ):>1800 Capacity (kg/h):3500-4500 Single cycle time(s):<160 Power (kW):60 Bale discharging and operation:Turn-out, hand valve control 4. Quality: This metal baler apply to ISO9001: 2000 standard. 5. Service: 1) One year guarantee and lifelong maintenance; 2) Any problem, you can call us directly.

metal scrap recycling

by suzhou eaglestar import and export co.,ltd     based in CHINA

metal scrap recycling is suitable for the steel plants,recycling companies ferrous non-ferrous metal smelting industry to compress metal scrap(steel paring,waste copper & aluminum, waste stainless steel, scrap from discarded automobiles)into acceptable furnace charges of cuboids, cylinders, octagons & other shapes, so as to reduce the cost of transportation & smelting, to speed up furnace charging.

Compacting Scrap Aluminum

by Enerpat Group UK Ltd     based in Brentwood, UNITED KINGDOM

T200XL Scrap metal baler is one heavy duty baler for compacting scrap aluminum into density bales.

Wastewater treatment for the metal industry

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Wastewater and process water treatment in the metal industry. Industrial waste water or circuit water in the metal industry can be broken down into many comprehensive, subject-specific areas. AWAS has developed various methods of treatment technology for the metal industry in the last 30 years. Generally we accept any environmental challenge and like to respond to individual problems.

Recycling equipment for shredding electronic scrap (E-scrap)

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable materials that can be recycled for future use. As a result, separation and recovery are critical elements of the shredding process for electronic materials.

Metal Sorting - End of Life Vehicles Scrap Sorting

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

Using modern TOMRA sorting technology you can generate clean non-ferrous metal fractions in your daily shredder operation. The processing of valuable scrap metal gains more and more importance worldwide. The aim is to generate clean, mono-fraction products from this very complex stream of End of Life Vehicles scrap metal material using suitable separation procedures. And that is worthwhile; End of Life Vehicles scrap processing does not only preserve natural resources of raw material, but it is also considerably cheaper. Compared to the aluminium production from primary raw material, using secondary material from End of Life Vehicles saves around 90% of the energy demand.

E-scrap processing & shredding

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

SSI manufactures shredders and automated systems to efficiently process all varieties of electronic scrap for recycling, reclamation and recovery. Since 1980, SSI has designed and implemented effective electronic scrap (e-scrap) processing solutions worldwide. With capacities from 2 - 15 tons per hour, many of the world`s largest e-scrap processing facilities employ `automated material recovery systems` from SSI, to extract marketable materials.

On-site analysis of scrap metal for sorting in the metal recyling industry

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

Scrap metal sorting requires fast, accurate, on-site analysis. To achieve maximum price for the scrap, analysis for both incoming and outgoing scrap is required. X-ray Fluorescence (XRF) analysis is widely used within the scrap metal sorting and recycling industry to achieve highest efficiency, most consistent product and best price and all this through Non-Destructive Testing.

Reliable Shredding Technology for Electronic Scrap

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

Automoblie crushers for recycling & scrap industry

by Granutech-Saturn Systems     based in Grand Prairie, TEXAS (USA)

Granutech’s MAC crushers are the industry-leading automobile crushers. With over 40 years of experience and more than 2,000 machines in operation, we have developed a line of reliable and durable auto crushers designed to meet the needs of the automobile recycling and scrap industry. The crushed car from a MAC is the most preferred form for shredding and the safest form for feeding into car shredders.

Scrap metal shredding

by SSI Shredding Systems, Inc.     based in Wilsonville, OREGON (USA)

Shredding of metals for volume reduction can simplify material handling, minimize storage space and reduce transportation and disposal costs. SSI has built shredders to process light scrap in a metal recycling yard, or materials generated by a manufacturer, such as aluminum extrusion from a door or window manufacturer. SSI shredders have also been used to prepare metals to feed into high-speed hammermills.

Need help finding the right suppliers?

Let the XPRTs do the work for you