industrial recycling Articles
-
E-scrap: metals too precious to ignore
Increased recovery of waste electrical and electronic equipment (WEEE) is providing the global recycling industry with fresh challenges. Researchers from Berlin’s University of Technology have been taking a close look at the material flowing into and out of the recycling process, paying special attention to the precious metals content. Their main conclusion is that conventional sorting ...
-
Pioneers within WEEE recycling
In a scrap yard in Switzerland right in the middle of the beautiful Alps you can find one of Eldan Recycling’s most cherished and faithful customers – Cablofer Recycling SA. Cablofer was actually one of the first companies within the WEEE-recycling industry. Cablofer Recycling SA is a scrap metal processor dealing with ferrous and non-ferrous scrap on a 40'000 m2 plot in Switzerland. ...
-
Scrap Metal Baler
This is a metal baler, which can pack scrap metal, aluminum, and iron into briquettes, which is convenient for metal transportation and recycling. This metal briquetting machine has different models, and we can configure the right model for you according to the packaged materials. Metal mineral resources are non-renewable and will only be used less and less. In order to ensure the full ...
-
Remove My Car stands up for vehicle recycling industry
Vehicle recycling expert Remove My Car is standing up for the ELV (End of Life Vehicle) industry at a time when the reputation of vehicle recyclers has been put under national scrutiny by the International Roundtable on Auto Recycling in Japan. The company believes the vehicle recycling industry in the UK is cleaning up its act, helped along by recent legislation, and that it no longer deserves ...
-
Tire Recycling Machine: An Easy Guide And Frequently Asked Questions
A tire recycling machine is a device that separates rubber from steel/metal for reusability in other industries. Companies thinking about purchasing a tire recycling machine should do their research around the model and make from the recycler before making a purchasing decision. They will also want to think of freight, option of service technicians, and vendor financing options when researching a ...
-
New ISRI scrap specifications
The Institute of Scrap Recycling Industries (ISRI) says it has updated the 2007 Scrap Specifications Circular with revisions to three non-ferrous specifications and the addition of a new specification. The new specifications has become effective on November 19th 2007. The ISRI’s Board of Directors approved recommendations from the Non-Ferrous Division to revise following specifications during ...
-
New Roll-Off Makes it Easier to be Green
Wilkinson iron & metal may have started in the small Texas town of Brownsville, but the business is going as strong as the steel they recycle. Jim Wilkinson grew up around the recycling industry with his grandfather starting out in 1937. Wilkinson took over the business in 1966, serving the southern area of Texas as well as northern Mexico. Collecting Scrap Metal For Wilkinson, the scrap ...
-
Metals In China - Coming-of-age for China´s Scrap Conventions
The Secondary Metals International Forum has established itself as the most mature and international of China’s scrap conventions. In terms of organisation and programming, the latest forum has helped to raise the Chinese scrap convention to a new, international standard while presenting an issues agenda whose impact is likely to be felt for years to come. During the last three years, China ...
-
Why Your Business Should Recycle
Why should your business recycle? The answer to this seems obvious to us, but to those who are new to the benefits of recycling, this is a real question that needs clarity. After all, recycling requires an investment and commitment. If your business still does not recycle, its time you look at why its important that all companies, big or small, and in every industry sector, should ...
-
Tire Recycling Machine: A Basic Guide and FAQ
A tire recycling machine is actually a device that separates rubber from steel/metal for reusability in other industries. Companies thinking about purchasing a tire recycling machine ought to do their research on the model and make from the recycler prior to a purchasing decision. They will want to think of freight, accessibility of service technicians, and vendor financing options when ...
-
ELDAN RECYCLING AND PICVISA JOIN FORCES TO REDEFINE RECYCLING
ELDAN RECYCLING AND PICVISA JOIN FORCES TO REDEFINE RECYCLING by Picvisa | Feb 6, 2024 | About us, Circular economy, Waste recycling Just when we thought it was all over in the world of recycling, two of the industry’s leading companies decide to join forces in an unprecedented collaboration. The reason? To take the recycling industry a step further, transforming the way we currently handle ...
-
Recyclers help to cut huge container imbalance
The Port of Rotterdam Authority is housed in an office building with probably the most stunning view over Rotterdam. From the top floor, visitors have a breathtaking view on the many barges which are travelling along the busy river, the Erasmus bridge and the skyline of Europe’s main port. Speaking about the importance of ports and harbours to the recycling industry, Victor Schoenmakers, at the ...
-
Future of Mutilated Coin Program Uncertain for Scrap Metal Recyclers
Old pennies, nickels, dimes and quarters lost between automobile seats, stuck in coin-operated washers and dryers or left in vending machines routinely make their way into the scrap stream. A popular program operated by the U.S. Mint to exchange these coins was suspended and is now under review. New regulations recently proposed by the Mint could mean that scrap metal recyclers will no longer be ...
-
Why Briquetting Machines are Favorite of Recycling Industries?
With the increasing attention towards proper waste recycling, there has been huge requirement of right machines and tools to properly convert waste into useful things. One of the best solutions companies and individuals got was briquetting plant for effective recycling of wood as well as metal waste. What is the major process at the recycling company: to collect waste; to segregate different ...
-
Purchases, Sales, Quotes and Contracts: Better Software Management Enhances Efficiency, Boosts Profits
“Knowledge is power is time is money,” the saying goes. This has never been more true than in business today. An abundance of information can be at our fingertips and how we choose to utilize data, or not use it, can create or diminish a competitive advantage. This holds true in the scrap metal recycling industry. While the work of a scrap metal recycling yard may be crushing metal, ...
-
Tire Recycling Pyrolysis Machine: A Basic Guide And Frequently Asked Questions
A tire recycling pyrolysis machine is actually a device that separates rubber from steel/metal for reusability in other industries. Companies thinking about purchasing a tire recycling machine need to do their research about the brand name of the recycler prior to making a purchasing decision. They will also want to think of freight, accessibility of service technicians, and vendor financing ...
-
Export Tax Incentive Helpful to Scrap Metal Recyclers In Uncertain Times
Tax filing day for 2020 is behind us now, but it is not too early for scrap metal recyclers to start planning for 2021 federal income taxes. Scrap metal recyclers who export may stand to benefit from an export tax incentive that is easy to set up and available for use this year. Although there is uncertainty about various tax proposals and future tax rates, the IC-DISC is currently a permanent ...
-
Tire Recycling Machine: A Straightforward Guide And Frequently Asked Questions
A tire recycling machine is a device that separates rubber from steel/metal for reusability in other industries. Companies thinking about purchasing a tire recycling machine should do their research in the brand name of your recycler before making a purchasing decision. They are going to also want to take into consideration freight, accessibility to service technicians, and vendor financing ...
-
The Simple Process Of A Metal Recycling Center
Metal recycling is an eco-friendly way to save our already stressed out environment by the way of recycling old and worn-out metal items to use them further as a raw material in the process of manufacturing new steel items. Metal recycling industry in another right step in the direction of contributing towards more greener and healthier environment. This industry has expanded manifold in recent ...
By FCT Recovery
-
6 Ways Dispatch Software Can Boost Your Scrap Metal Recycling Business
Optimizing your assets is a key to unlocking profitability in business. This holds true for some scrap metal recyclers, who utilize truck fleets to obtain scrap. For recyclers an important consideration is whether rollingstock is being managed to its maximum potential and whether office staff has the tools to integrate dispatch activity with the rest of operations to increase efficiency. For a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you