Only show results available in Virginia? Ok

Scrap Recycling Applications

  • XRF analysis for positive material identification

    Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Premium

    Recycling equipments for shredding scrap metals

    Scrap metal includes metals that can be reclaimed for use in manufacturing, processed for re-melting or prepared for disposal in landfills. These metals include industrial scrap metal and remainders, electronic scrap, aluminum and precious metals. Shredders prepare the metals for bailing and bundling, saving storage space, transportation and disposal costs. Quad shaft shredders reduce and separate electronic scrap and prototypes in one process, allowing for the recovery of precious metals. Dual or quad shaft shredders break bales or briquettes of pre-processed metal scrap for final size reduction and separation for reclamation or re-melting, allowing for recovery and reuse of the metals. Integrated systems include grinders and hammer mills for producing small size or powdered materials for reuse.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Metal swarf shredding for the metal industry

    In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Scrap recycling

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Scrap Tire Recycling

    By Fulcrum Environmental Solutions Inc based in Edmonton, ALBERTA (CANADA).

  • Premium

    Metal Sorting - End of Life Vehicles Scrap Sorting

    Using modern TOMRA sorting technology you can generate clean non-ferrous metal fractions in your daily shredder operation. The processing of valuable scrap metal gains more and more importance worldwide. The aim is to generate clean, mono-fraction products from this very complex stream of End of Life Vehicles scrap metal material using suitable separation procedures. And that is worthwhile; End of Life Vehicles scrap processing does not only preserve natural resources of raw material, but it is also considerably cheaper. Compared to the aluminium production from primary raw material, using secondary material from End of Life Vehicles saves around 90% of the energy demand.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • metal scrap recycling

    metal scrap recycling is suitable for the steel plants,recycling companies ferrous non-ferrous metal smelting industry to compress metal scrap(steel paring,waste copper & aluminum, waste stainless steel, scrap from discarded automobiles)into acceptable furnace charges of cuboids, cylinders, octagons & other shapes, so as to reduce the cost of transportation & smelting, to speed up furnace charging.

  • Premium

    Recycling equipment for shredding electronic scrap (E-scrap)

    Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable materials that can be recycled for future use. As a result, separation and recovery are critical elements of the shredding process for electronic materials.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling Equipment for Plastics Industry

    Shredders for Plastics Scrap Size Reduction. Low cost alternatives for your waste plastics recycling equipments. Shredders for Plastic Scrap and E-scrap. Harden Machinery supplies single shaft and two/four shaft shear shredders for plastic scrap recycling and other solid waste size reduction applications. All of our machine are made in Chine with European design and Chinese cost. Our machines are being used in China and around the world.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    E-scrap Recycling Equipment for Recycling Industry

    Electronic scrap (also named e-scrap) mainly includes discarded household appliance like refrigerator, TV, computer, washing machine, printer, fax machine, cellphone, circuit board, hard discs, CD ect. With the development of electronic industry and information technology, and electronic products’ fast replacement, the problem of e-scrap has become one of the stringent problems which need to be resolved effectively and correctly. Every year the 20 – 50 million metric tons of electronics end up in landfills all over the world.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Electronic scrap processing & shredding

    SSI manufactures shredders and automated systems to efficiently process all varieties of electronic scrap for recycling, reclamation and recovery. With many successful customers operating around the world, SSI has found the best electronics scrap processing system design philosophy is to employ machinery to separate commodities at the first point they become marketable, at the highest capacity possible, and refine high value materials after initial separation.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Metal sorting for the metal recycling industry

    Metals can be identified according to the colour, nature of the metal and of elemental composition.

    By REDWAVE a division of BT-Wolfgang Binder based in Gleisdorf, AUSTRIA.

  • Recycling, Scrap, Metal, Glass & Plastics

    By Innov-X Canada based in Vancouver, BRITISH COLUMBIA (CANADA).

  • XRF analysis for scrap metal recycling

    End suppliers of scrap metal recycling has become more complex and challenging over the years, as customers have become more demanding and metal markets more volatile. The modern scrap metal merchant recycler must be able to make decisions quickly and adapt to changing market conditions in order to remain profitable.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • Metal cutting for the metal recycling industry

    Because metal scrap arrives for re-melting in many forms, it must first be processed. Heavy, bulky scrap should be densified and sheared in a guillotine scrap shear.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • e-scrap recycling System

    PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

    By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.

  • Premium

    Shredders for Wood

    Wood is presenting in various forms: wooden pallets, furniture scraps, old furnitures, ecc.. SA Eng propose for that kind of products, systems foreseeing a first volume reduction, the separation from possible ferrous parts contained in the shredded material and a final refining to get the required final size.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Premium

    Automoblie crushers for recycling & scrap industry

    Granutech’s MAC crushers are the industry-leading automobile crushers. With over 40 years of experience and more than 2,000 machines in operation, we have developed a line of reliable and durable auto crushers designed to meet the needs of the automobile recycling and scrap industry. The crushed car from a MAC is the most preferred form for shredding and the safest form for feeding into car shredders.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Reliable Shredding Technology for Electronic Scrap

    Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you