Waste And Recycling Services Available In Togo
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
At Anguil, we merge time-tested, standard products with innovative, custom-engineered solutions. We partner with you every step of the process to design, manufacture, and install systems that reduce your environmental footprint, lower operating costs, and ultimately, maximize return on investment. With over half of Anguil’s staff consisting of degreed engineers, we are uniquely capable of ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The Kjeldahl Optimizer helps you to set up a Kjeldahl experiment correctly. It shows you how to save time, chemicals and finally money. It is a vital tool in the application support for Kjeldahl users. Application-related questions can be answered quickly and ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Reducing environmental impact using our technologies cultivated through studying water to fully utilize limited resources. Kurita’s solutions are not limited to water but expand to include the whole environmental field. Using featured technologies to reduce the impact on the global environment, such as those to reduce the waste generated by water treatment and recycle it as new resources as ...
-
PremiumManufactured by Fluence Corporationbased in USA
From ion exchange to resin processes to advanced chromatography, Fluence offers a range of sustainable and cost-effective solutions for food and beverage processing. Fluence has more than 30 years of experience implementing food-processing solutions using ion exchange and adsorbent resins. Our innovative solutions are ideal for wine and fruit juice processing, as well as whey demineralization and ...
-
PremiumManufactured by CETCObased in USA
ENVIROFIL PCC is a new, innovative recycling technology that allows papermakers to recover mineral pigments from deinking residue by converting these raw materials to ENVIROFIL PCC. The ENVIROFIL process has the ability to substantially improve waste paper yield, mitigate solid waste disposal costs and reduce the environmental impact of the deinking process. The process addresses important ...
-
Premiumbased in USA
EPA, DOT and OSHA require a vast number of written plans and procedures. Environmental Resource Center can determine which are applicable to your operations and then develop the required plans and procedures for you. From hazardous materials and hazardous waste management to notification procedures, security plans, and emergency procedures, Environmental Resource Center can determine which plans ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
Our in-house Research and Development capabilities facilitate product development to ensure state-of-the-art technology in constantly changing environments. Legislative changes have affected the way we dispose of municipal solid waste, tires, medical waste, electronic hardware, and confidential documents. Consequently, these industries rely on Shred-Tech to successfully design and manufacture ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
At Matthews, we're experts in using Thermal Processes to solve environmental problems. The process begins with our Engineering team working with you to clearly define the challenges and then drawing on their decades of experience to design productive, creative solutions. Our project management team assists with every step of the process, from site design to electrical engineering. Click ...
-
Premiumbased in USA
Dangerous Goods are properly classified, marked, labeled and documented. Environmental Resource Center's staff of hazardous materials experts has been helping customers to comply with DOT, IATA, and IMO regulations for more than 25 years. You can rely on us to provide this service for your facility on a continuing or as-needed ...
-
PremiumManufactured by Toro Equipment S.L.based in SPAIN
In urban waste water treatment, the water line is divided into four steps: pretreatment, primary, secondary and tertiary treatments. The first step is carried out by physical processes in order to prepare the water for subsequent phases. In the second stage, a physical-chemical treatment is carried out which allows the suspended particles flottation, followed by a biological treatment, consisting ...
-
PremiumManufactured by CETCObased in USA
Leading the wastewater treatment market for more than 35 years with one-step flocculant technology and quality service. CETCO’s Wastewater Treatment Division provides clay-based chemicals that will remove emulsified oils, heavy metals and suspended solids from water allowing economical disposal or recycling of your industrial waste stream. Our one-simple step products are backed by a wealth ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Success is ... being completely looked after. Our services maintain the value of your machine - long-term. From the first consultation, the purchase decision, the commissioning and through the utilization phase: When it comes to industrial centrifuges and belt presses, you need a reliable partner at your side. Someone you can always rely on. Because our machines play an important key role in many ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
How can we help “Save Your Septic”?. The S.O.S.-Save Our Septic Program provides homeowners peace of mind when upgrading biologically-failed septic systems and to prevent future failures. We can help fix or prevent: Soggy lawns, foul odors, plumbing ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Sebright Products and Bright Technologies provide turnkey design and installation for our equipment. Our factory installation crews have decades of experience moving and installing equipment. Many times our crews have the equipment installed in one day or less onsite so you are up and running quickly with a minimum of disruption. We will leave your site clean and ready for ...
-
PremiumManufactured by CETCObased in USA
The Water Treatment Division at CETCO specializes in water treatment processes and technologies to remove oil, hydrocarbons, heavy metals, solids, toxic materials and other contaminants from your operations wastewater stream. Drawing on years of experience in water treatment, CETCO has designed a rental fleet that meets a vast variety of flow rates, temperatures and pressures. Our turnkey ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Rental centrifuges for extensive testing and short-term projects. Our centrifuges are often required for short-term projects. Flottweg offers rental centrifuges exactly for these cases. Simply rent our centrifuges for the duration of the project. Finding the right solution for a separation task is a constant challenge our customers. With our rental centrifuges, comprehensive on-site tests can ...
-
PremiumManufactured by Avecom NVbased in BELGIUM
Biobased and biodegradable polymers are providing the key to tackling single-use plastic pollution by reducing plastic waste and offering a sustainable alternative to traditional plastics. Plastic pollution and the disposal of single-use plastic packaging are critical sustainability issues. Currently, we generate roughly 300 million tonnes of plastic waste every year, which is equivalent to the ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Geochemical processes are very important for the storage of radioactive waste in deep geological repositories. The chemical composition of host rock and groundwater is the subject of many investigations. Influences of the construction and operation of a repository on geochemistry are clarified in rock laboratory experiments. As part of its long-term cooperation with Nagra and Andra (Agence ...
-
PremiumManufactured by CETCObased in USA
The Water Treatment Division at CETCO specializes in water treatment processes and technologies to remove oil, hydrocarbons, heavy metals, solids, toxic materials and other contaminants from your operations wastewater ...
-
PremiumManufactured by Safe Training Systems Ltd. (STS)based in UNITED KINGDOM
STS have over the years developed and had manufactured many molded and machined cases for equipment and instrumentation. This is just one example of a casing designed for a personal dosimeter simulator. The design of this unit threw up some interesting challenges. The unit had to be manufactured from RF transmissible material with particular attention given to the case area surrounding the 3 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you